Need help locating placement for brackets

[Yogibara]

STILL waiting on parts so I might as well put everything on the engine. I have two brackets that each need a home on Olaf. Can anyone help with this?

IMG_4353.jpg
IMG_4356.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

The bottom one goes on your rear timing cover and the wiring harnesses straps to it 20210331_200608.jpg

I think it is held on with the bottom vacuum pump bolt. The one that has the larger head in it

Sent from my SM-G973W using Audizine Forum mobile app

[Yogibara]

The bottom one goes on your rear timing cover and the wiring harnesses straps to it 20210331_200608.jpg

I think it is held on with the bottom vacuum pump bolt. The one that has the larger head in it

Sent from my SM-G973W using Audizine Forum mobile app

I see it! Thanks man!
IMG_4479.jpg

Wanna try 2 for 2?


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

looks like front engine hoist bracket but its too dark for me to look

[Yogibara]

looks like front engine hoist bracket but its too dark for me to look

That one is still a mystery. The bracket is too thin for an engine hoist spot. Besides those are accounted for.


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

certainly looks like it had one of those dome zip ties on it. i bet is from the same general area as the other bracket

[Yogibara]

certainly looks like it had one of those dome zip ties on it. i bet is from the same general area as the other bracket

Agreed, it was pretty dirty. Everything on the back of the engine and bell housing needed lots of cleaning.

[Jayz691]

Look up the part #..

Sent from my LM-G710VM using Audizine Forum mobile app

[Theiceman]

better pic of the last bracket..

[Yogibara]

I almost think the first bracket attaches to the bell housing.


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

I almost think the first bracket attaches to the bell housing.


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

it might, i have never been down there.. 02 sensor wiring bracket ?

[Yogibara]

Here’s a clean picture of where the larger bracket goes. As you can see it uses a larger headed bolt. It is part of the vacuum pump assembly. Makes me wonder about the other bracket now.
IMG_4543.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

Here’s a clean picture of where the larger bracket goes. As you can see it uses a larger headed bolt. It is part of the vacuum pump assembly. Makes me wonder about the other bracket now.
IMG_4543.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

yeah like i said in post number 2 ? lol

[Yogibara]

Spoke too soon. Found it I believe. Must go on transmission.

IMG_4545.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Yogibara]

I’m sure all of you were chomping at the bit to know where that last bracket goes. After combing through gigs of video I found it. It attaches to driver’s side of transmission and holds the big round connector that connects to the transmission.

IMG_4565.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

[Theiceman]

I’m sure all of you were chomping at the bit to know where that last bracket goes. After combing through gigs of video I found it. It attaches to driver’s side of transmission and holds the big round connector that connects to the transmission.

IMG_4565.jpg


I made my 2007 A4 a star on YouTube @ Yogi’s Garage

yeah thats a good find, fortunately i have never been down there before..

[Jayz691]

Well, that was less than satisfying, lol. At least ya found it

Sent from my LM-G710VM using Audizine Forum mobile app

[Theiceman]

that stuff irritates me too.. i have one bolt leftover from my engine build that i forgot to put back in. I know exactly where it goes and it does absolutely nothing but i have been hanging on to it for 2 years and i plan to put it back in the next time the front end comes off.