Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Senior Member Three Rings
    Join Date
    Mar 11 2020
    AZ Member #
    541724
    Location
    Tx

    034 Intake Tube Repair Question

    Guest-only advertisement. Register or Log In now!
    Picked up an 034 Intake tube and was wondering if there is any special type of sealant/adhesive that should be used on the "barb" that the small vent hose close to the throttle body slides over?

    My barb itself, not the vent hose, slips in and out of the intake tube nipple pretty easily and I wasn't sure what, if anything, I should do/use to repair this?
    Last edited by A2andres; 02-07-2021 at 09:06 AM.

  2. #2
    Veteran Member Four Rings
    Join Date
    Jul 31 2016
    AZ Member #
    377505
    Location
    PA

    I would just use some silicone gasket maker RTV and give that a try.

    Sent from my SM-G988U using Audizine Forum mobile app
    Custom DP 194/57 E40 Water-Meth (Aquamist) | BG HPT ZF8 Tune | APR CPS with AWE Reservoir (Divorced Coolant Loop) | APR Open Intake and 034 Intake Tube | RSE Heat Shielded HFCs | CTS Downpipes with Vibrant UQ Resonators Added | AWE Touring Exhaust | 034 RSB | Bilstein B8 Shocks and H&R -3 Springs | ECS Trans and Drivetrain Inserts | 034 Trans and Motor Mounts | Moog Front End Links | Headlight Projector Retrofit and Painted Housings

  3. #3
    Senior Member Three Rings
    Join Date
    Mar 11 2020
    AZ Member #
    541724
    Location
    Tx

    Perfect, thanks!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.