Megasquirt 3 for AEB engine.

**Andrew 900** · 10-26-2020 05:01 AM

Hi everyone. I am making ECU for the AEB engine. Perhaps this will interest you.
Please write what you think. This is a link to ebay:
https://www.ebay.com/itm/29379865674...84.m1555.l2649
ps. dear moderator do not block me, I am the same as you are a fan of audi.
ps. forgive me if I got the wrong section.

**B5AUDIGUY96** · 11-18-2020 07:42 AM

I just recently purchased this, I'll let you know what I think and if I have any questions about the ecu when I receive it. I'm planning on running a holset hx35 on e85 with a flex fuel sensor on the aeb engine.

**Andrew 900** · 11-28-2020 10:30 PM

B5AUDIGUY96, good luck to you. I will be happy to answer your questions.
I myself am now installing a hybrid t3 + gt35, a water intercooler.
Forgive me for not answering for a long time, I thought that no one here would write to me.

**Andrew 900** · 12-20-2021 04:17 AM

Hello. If you want to buy ECU, please email me:
[email protected]
Now the cost is $ 380. You can buy through the paypal.
I'm not selling it on ebay yet, sorry.
Specification:
Plug and play (no need to solder anything).
Everything works right away. You only need to change the "required fuel" parameter according to your injectors (I instaled 800 cc injectors and a 3 bar fuel pressure regulator).
The tachometer is working. ECU sees the speed of the car. The boost valve is working. The carbon canister valve can be used to control the camshaft rotation valve (if you have one). Works great with red coils. Built-in MAP sensor up to 3 bar excess.
There are additional entrances and exits. Both knock sensors are working. Idling is adjustable.
The set includes a bluetooth adapter for communication with a laptop. No wires! Tunerstudio and Megalogviewer work.
You will need a wideband AEM sensor for tuning.
[IMG]

[/IMG]
[IMG]

[/IMG]

**Andrew 900** · 03-08-2022 04:01 AM

Currently only available on ebay. I had to raise the price because ebay charges me 20-25% (depending on the country of the buyer).
https://www.ebay.com/itm/294852276280

**PassatKid666** · 09-04-2022 05:00 PM

Originally Posted by Andrew 900

Hi everyone. I am making ECU for the AEB engine. Perhaps this will interest you.
Please write what you think. This is a link to ebay:
https://www.ebay.com/itm/29379865674...84.m1555.l2649
ps. dear moderator do not block me, I am the same as you are a fan of audi.
ps. forgive me if I got the wrong section.

I've purchased this off of you , and the only issue is the throttle body would not register. It had no signal . Common issue ? My stock ecu started the car up just fine so throttle body is working.

Sent from my moto g stylus using Audizine Forum mobile app

**Andrew 900** · 01-08-2023 09:52 AM

Now you can buy only through cryptocurrency. Price reduced to $350.
Please email me.
[email protected]

**Andrew 900** · 05-01-2023 05:04 AM

Now you can pay by Visa or MasterCard. Paypal will be available soon.

**Andrew 900** · 09-02-2023 05:35 PM

A small video for you.
This is my Audi.

**Avantly** · 11-16-2023 04:13 PM

I am confused, I don't see a single inductor/coil on that board. In fact, I don't see any front end power/transient filtering at all??? Nor does there appear to be any TVS devices on the inputs/outputs???? Is there a second board not shown in the pictures which handles all of this?