What is the torque spec for the Rear Suspension bolts on a '04 Audi A6 C5 3.0L Avant?

[arjun90]

Bentley Publisher's doesn't disclose the full torque specifications for the rear suspension, particularly for the rear bolts on the lower control arm triangular plate. I snugged them up, not sure if it is 70 ft lbs or 81 ft lbs or even more.
What is the torque spec for the Rear Suspension bolts on a 2004 Audi A6 C5 3.0L Avant?

[mc_hotmail]

From ElsaWin manual

Tightening torques:
Anti-roll bar clamp to subframe 25 Nm
Coupling rod to anti-roll bar 50 Nm
Transverse link to wheel bearing housing 70 Nm + 90°
Shock absorber to body 45 Nm
Damper to link, Use new bolts 70 Nm + 90°
Brake calliper to holder, Use new bolts 30 Nm

[mc_hotmail]

http://www.numberfactory.com/nf_torque.html

[arjun90]

Thanks, unfortunately, it doesn't seem to give torque specs for the bolts that go into the back of the lower control arm plate (there are two bushings on both driver and passenger side that secure into the rear subframe); I ended up snugging these bolts with the suspension preloaded; then tightened until I could feel no more.