Audi B8.5 S4 Supercharger

[Black_Panther]

Hi guys,

I have ported my supercharger, but have hit a snag.

The needle bearing have a certain grease/oil (a blue/black colour) for lubrication and I need to relube them.

Audi shows nothing on their system and I have no specs of it, such as weight/viscosity etc.

Can any help me find this or give me a part number?

Thank you.

[awwturbo]

Replace the needle bearings. I don't know if you are seeing traces of it around the bearings or around the inside of the supercharger, but if you are the bearings are toast.

[Black_Panther]

Thanks for the reply.

The bearings are perfect the reason for the grease is it needed to be cleaned out after porting.

However, I cannot find the needle bearing grease anywhere at Audi. It's not on their system.

I'm sure somebody here must know what it is? It is a very dark blue colour.

I asked Joker on his Facebook page, but doesn't seem he is interested in helping me, he is very cagey.

All I need to know if what that grease is called, where I can get it or alternately what it's viscosity and temp range is so I can match it up.

Thanks

[Ashtonts]

https://zzperformance.com/products/n...bearing-grease

Looks like Nye Rheotemp 500 is pretty standard needle bearing grease and is commonly used in Eaton superchargers.

[Jimcoily]

This is the grease I used when I ported my supercharger. https://www.ebay.com/itm/Supercharge...-/252048346170

[Black_Panther]

Thank you to you all for assisting me. It's been really helpful. Many thanks....

I'm a newbie, so learning the ropes, please forgive me.

Regards

[BR11S4]

https://zzperformance.com/products/n...bearing-grease


Sent from my iPhone using Audizine