Random Snap of your B9 Q/SQ5

[Mops@Nemesis]

I'll kick this off -

[BLT10]

hai. bad iphone pic

[DiscoDan]

Putting on the CCRs this week and detailing. Will get a photo up.

[tonytonitone]

I took off my ASC module a month ago and finally got around to putting it back on yesterday. So much better!

[subaruski]

^ twins

[Bezlar]

Lol. Found it.




Sent from my iPhone using Tapatalk

[Bezlar]

Not sure it likes being kicked out of its garage side while rs gets speed upgrades.



Sent from my iPhone using Tapatalk

[Bezlar]

Battle of the blues.



Sent from my iPhone using Tapatalk

[ADG05]

[Makes Centz]

these pix are a little on the older side but heres My contribution. ;)

[1S32K16]

My 2019 Quantum on Red interior. Hope to get my airmatic links installed one of these days and pickup some new wheels.

[Mops@Nemesis]

[DiscoDan]

My 2019 Quantum on Red interior. Hope to get my airmatic links installed one of these days and pickup some new wheels.

I have the same look, quantum with all black badging. And I'm glad you too did the front license plate delete

[subaruski]

I need to get on the black out front rings and SQ5 badging. Last I looked the front SQ5 badge was around $120. Anyone have a less expensive source?

I have the same look, quantum with all black badging. And I'm glad you too did the front license plate delete

[dimonblr]

[1S32K16]

I need to get on the black out front rings and SQ5 badging. Last I looked the front SQ5 badge was around $120. Anyone have a less expensive source?

I got the oem black rings from https://www.audiusaparts.com/

The rear SQ5 badge I got from a guy on Instagram probably similar to what you find on eBay. The hard one is always the grille SQ5 badge.

[SurfTek]

I got the oem black rings from https://www.audiusaparts.com/

The rear SQ5 badge I got from a guy on Instagram probably similar to what you find on eBay. The hard one is always the grille SQ5 badge.

I just did all gloss black emblems, I was able to get the rear rings, rear sq5 badge, and front sq5 badge from this seller on ebay eurospeedtrend. Looks/feels just like OEM but black. For the front rings I found a no hassle option from this seller automotive_gem_ag. The rings are made to fit right over your existing rings. No hassle. I did add some extra loctite glue to assist the adhesive in holding the new rings.

[bryan03tls]

Attachment 173508

Quick iPhone pic.

[1S32K16]

Attachment 173508

Quick iPhone pic.

Looks great, how are you lowered? Any side pics of the wheels?

[bryan03tls]

Looks great, how are you lowered? Any side pics of the wheels?

Lowering links. I'll take better pic. tomorrow. Don't know what happen to the pic. Comfort mode inside the garage. First pic is in dynamic mode.

[SurfTek]

Side

[Bezlar]

Side

Biong


Sent from my iPad using Tapatalk

[phillyquattro]

Posted these to my build thread earlier but just realized that thread is somehow in the B8 section. 🤷🏻

[Edit] My thread is now migrated to it's proper home. Yay!

[DenaliTim]

Posted these to my build thread earlier but just realized that thread is somehow in the B8 section. 🤷🏻

[Edit] My thread is now migrated to it's proper home. Yay!

Looks so good. We still need to sync up and grab a beer whenever we are done with lock down so I can check the ride out.

[phillyquattro]

Looks so good. We still need to sync up and grab a beer whenever we are done with lock down so I can check the ride out.

I'm down any time. Well, any time after Covid times end. Haha.

[BklynSQ5]

I really love how the car looks in this picture...and it's not even clean!

[Bezlar]

Waiting on zohr our mobile tire service to swap out rears for new ones. Front are still good



Sent from my iPhone using Tapatalk

[nandofumi]

Grey house. Grey Audi. Grey asphalt. Grey sky. Hmmm...seems to be lot of greys in my life at the moment. Lol. Hopefully there's some semblance of a post Covid ISO summer that's poppin' like them school bus yellow calipers!

Audi Home.jpg

p.s. I must be the only one on the planet that likes the look of the stock 20" peelers. If only I could get em in a beefier 10.5" width. Sigh. Guess I'll eventually have to order up some Brixtons...

[1S32K16]

Grey house. Grey Audi. Grey asphalt. Grey sky. Hmmm...seems to be lot of greys in my life at the moment. Lol. Hopefully there's some semblance of a post Covid ISO summer that's poppin' like them school bus yellow calipers!

Audi Home.jpg

p.s. I must be the only one on the planet that likes the look of the stock 20" peelers. If only I could get em in a beefier 10.5" width. Sigh. Guess I'll eventually have to order up some Brixtons...

Digging the yellow calipers! Car looks great, have a similar spec.

[audizzZZzz]

I wish KW would come out with the street comfort coilovers for B9 already. For now I'm on stilts... Envy you guys on air-springs

20190710_115457.jpg

[Mops@Nemesis]

I wish KW would come out with the street comfort coilovers for B9 already. For now I'm on stilts... Envy you guys on air-springs

20190710_115457.jpg

The V1 kit is now available 👍🏼

[audizzZZzz]

The V1 kit is now available 👍🏼

I'm very sensitive with ride quality and my SO is even worse. I don't know if the V1 will cut it. I don't want to drop too much anyway. I just want to reduce that gap without sacrificing ride comfort.

Any other suggestions?

[nandofumi]

Digging the yellow calipers! Car looks great, have a similar spec.

Thanks homie. Figured I'd be different in the sea of red calipers. Went with that warm school bus yellow. Not Porsche yellow. Not Ferrari yellow. Not Brembo yellow. But literally school bus yellow. Haha. It goes well with Quantum Gray and with black rims.

Then Koenigsegg goes and style bites my idea with their reveal of the Gemera GT so I guess I beat them to the colour combo punch by over a year. Lol.

Koenigsegg 6.jpg

Hope you're enjoying the Cali weather. Normally I'm chilling at home in Manhattan Beach when I'm not working but the border lockdown got me COVID chilling in my second home of Canada right now.

[Mops@Nemesis]

I'm very sensitive with ride quality and my SO is even worse. I don't know if the V1 will cut it. I don't want to drop too much anyway. I just want to reduce that gap without sacrificing ride comfort.

Any other suggestions?

The V1 kit with a ~35mm drop should ride like an SQ5 on stock suspension in Dynamic. Firmer, but far from harsh.

[Mops@Nemesis]

🚿

[Mynavi]

Made a monster truck tonight. Definitely needs to be lowered.

3B2FA2EE-1E4E-49A6-AA25-8B93797E67F8.jpg

[Andor]

New owner of a 2020 Quantum Gray SQ5 :)

Upgraded my fiance's Q3 to this. She is a happy camper

Mods on the way!

IMG_3747.jpgIMG_3761.jpg

[BarneyM]

Old 944t and new SQ5:

944-sq5.jpg

[audizzZZzz]

The V1 kit with a ~35mm drop should ride like an SQ5 on stock suspension in Dynamic. Firmer, but far from harsh.

I probably could live with that but not the wifey. I guess I have to continue to wait or just look forward to the 2021 S3 or RS3...

[Mops@Nemesis]

I probably could live with that but not the wifey. I guess I have to continue to wait or just look forward to the 2021 S3 or RS3...

There is a V3 option too. You can set them to ride stock or better smooth. Quite spendy though!