Originally Posted by S4GGIN
So Aeroforce showed up a day early, nice surprise. I had no issues whatsoever getting the gauge in the pod, no cutting the back out or anything of that sort needed. I even got to use the gauge retainer bracket that comes with the Aeroforce and did not need to use the rubber band or tape it. You can tighten the retainer screws enough to hold the gauge in the pod, but still be able to rotate the face of the gauge to get it level. Pics below:
I have the tape on the pod, but have not applied it yet its just sitting on the column for now. I also ran the cable tied the extra cable up above the kick panel near the OBD plug in. I may re-route it but wanted to see what it looks like first. Seems like this pod will be a good alternative to the Podi if it never comes back.
I have the tape on the pod, but have not applied it yet its just sitting on the column for now. I also ran the cable tied the extra cable up above the kick panel near the OBD plug in. I may re-route it but wanted to see what it looks like first. Seems like this pod will be a good alternative to the Podi if it never comes back.
Reply With Quote
Bookmarks