Gauge pods/Mounting Solutions?

[S4GGIN]

I can't seem to find many gauge pod/mounting solutions other than the ECS vent pod for the center vent or the two offered from Aeroforce. Any other options still out there? It looks like the podi steering wheel pod is discontinued.

Is there a solution to mount a 52mm in the left vent kinda like the P3 setup?

Sent from my SM-N975U using Audizine mobile app

[S4GGIN]

So did more research for anyone looking and found a column pod for a B6\B7 that is advertised to fit the B8 as well from NGP Racing. The brand is New South Performance. I'll report back with my findings.

https://store.ngpracing.com/new-sout...-s4-a5-s5.html

Found a website who still had the podi column pod advertised for sale as well. Placed the order, see if it gets cancelled.

I may also order an eBay special left vent pod to see what the fitment looks like. This is my ideal location.

Worst comes to worst I'll go with the Aeroforce defroster pod.

Sent from my SM-N975U using Audizine mobile app

[messepants]

I have been hunting for a while for the column pod. Will be interested to hear how these work out. The b7-b8 look similar in shape the the connections appear different but only going off of parts photos.

If you get the Podi and want to sell let me know.

I might end up going defroster vent.

JZ

[S4GGIN]

I have all three on order(NGP, Ebay, Podi), but the Podi order is still processing, which makes me think it will be canceled any time now. Ebay one will take some time to get here from China, the B6/B7 will be here on Thursday and ill try and get it test fitted Thursday night/Friday.

[hmc2261]

Sweet, I am interested as well in hearing how it fits

[AerotusX]

Keep us updated. I'm planning to install the Aeroforce gauge down the road also.

[S4GGIN]

Test fitted the New South Performance pod, Pictures below (excuse the dirty car). I think it will work as advertised, but the cutouts for blinker/wiper do not line up 100%. I did test both and they clear, so it may so just be more of a cosmetic thing. I also confirmed the pod front clears the steering wheel and does not rub. The Pod comes with instructions, sticker, and a rubber band for the gauge.

My Aeroforce Interceptor arrives on Friday, ill see how snug it fits. It looks deep enough to not need to drill out the back, but we will see. You can also see in the pictures there is enough room to tuck the wires underneath the pod and have it come out the back near the steering column.

You will need your own double sided tape, did not include any.










called about the Podi pod today, the online sales person was out on leave so they are behind on orders. Will keep posted.

China vent pod order I confirmed LHD and 52mm(They sell LHD and RHD, as well as 52mm or 60mm), so just waiting for snail mail and customs at this point.
This one if anyone is interested, or wants to have a laugh at the stock photos (the Photoshop always kills me): https://www.ebay.com/itm/60mm-or-52m...53.m2749.l2649

[AerotusX]

Thanks for the photos. For the price, it looks like a good deal. Let us know how the gauge fits and final assembly.

[S4GGIN]

Podi gauge order was cancelled. None in stock, no ETA of if\when more will be made.

Sent from my SM-N975U using Audizine mobile app

[messepants]

Bummer on the Podi. Wonder if they’ll ever run another batch.

Thanks for the detailed pics. Might have to go this route.

JZ

[Moogas1]

Aeroforce Technology Gauge with Podi...
https://r.tapatalk.com/shareLink/top...ink_source=app


Sent from my iPhone using Tapatalk

[S4GGIN]

The podi is not available anymore, which is why I started this post.

Aeroforce Technology Gauge with Podi...
https://r.tapatalk.com/shareLink/top...ink_source=app


Sent from my iPhone using Tapatalk

Sent from my SM-N975U using Audizine mobile app

[Moogas1]

Didn’t realize this was no longer available.... I just read something that Ukurish started a thread about as well.... take a look at latest threads....


Sent from my iPhone using Tapatalk

[S4GGIN]

Didn’t realize this was no longer available.... I just read something that Ukurish started a thread about as well.... take a look at latest threads....


Sent from my iPhone using Tapatalk

Cool there is another solution but I'm not looking for a P3 style gauge, I was looking more towards an aeroforce gauge. Updated pics in a moment.

[S4GGIN]

So Aeroforce showed up a day early, nice surprise. I had no issues whatsoever getting the gauge in the pod, no cutting the back out or anything of that sort needed. I even got to use the gauge retainer bracket that comes with the Aeroforce and did not need to use the rubber band or tape it. You can tighten the retainer screws enough to hold the gauge in the pod, but still be able to rotate the face of the gauge to get it level. Pics below:











I have the tape on the pod, but have not applied it yet its just sitting on the column for now. I also ran the cable tied the extra cable up above the kick panel near the OBD plug in. I may re-route it but wanted to see what it looks like first. Seems like this pod will be a good alternative to the Podi if it never comes back.

[AerotusX]

Looks nice. The gauge cavity looks deeper than the podi. Can you take a picture from the side view?

[S4GGIN]

This work?20200214_160732.jpeg20200214_160725.jpeg

Sent from my SM-N975U using Audizine mobile app

[messepants]

Thanks for the update. Not as elegant in side profile as the Podi but glad to see there is a solution.

JZ

[GotMo]

Thanks for the update. Not as elegant in side profile as the Podi but glad to see there is a solution.

JZ

Yeah, why can't they make a low-profile one that uses the P3 gauge on top of the steering column?

[S4GGIN]

One more update for those still following, got the Vent pod in the mail today and did a quick install. I would say it is still my favorite position out of all the choices, but the fit/finish could be much better for the item ordered. You remove the factory vent assembly, and this clicks into its place on the dash trim/chrome bezel.








Ill give this a try for a few and decide wither or not its livable. Last step will be the Aeroforce upper vent pod if I get bored of this.

[AerotusX]

Thanks for the update. The vent gauge doesn't look too bad.

[scalbert]

Ill give this a try for a few and decide wither or not its livable. Last step will be the Aeroforce upper vent pod if I get bored of this.

May try this out as well. On a side note, is it an '04 SVT Cobra?

[S4GGIN]

Ha, '03 I've had for about 5 years now. Lives in the garage most of its life, but sometimes you just wanna let a big blower v8 rip.

May try this out as well. On a side note, is it an '04 SVT Cobra?

Sent from my SM-N975U using Audizine mobile app

[cadguy77]

Sorry for the slight hijack..


Can someone tell me who makes the gauge mount?
Pic credit forcefedjunkie

Sent from my SM-G965F using Tapatalk

[byront8]

Anyone know if any of these pod mounts have RHd designs


Sent from my iPhone using Audizine

[cadguy77]

Anyone know if any of these pod mounts have RHd designs


Sent from my iPhone using Audizine

China vent pod order I confirmed LHD and 52mm(They sell LHD and RHD, as well as 52mm or 60mm), so just waiting for snail mail and customs at this point.
This one if anyone is interested, or wants to have a laugh at the stock photos (the Photoshop always kills me): https://www.ebay.com/itm/60mm-or-52m...53.m2749.l2649

Vent mount available in RHD

Sent from my SM-G965F using Tapatalk

[Phil.Lmbrt]

Sorry for the slight hijack..


Can someone tell me who makes the gauge mount?
Pic credit forcefedjunkie

Sent from my SM-G965F using Tapatalk

It's Aeroforce Gauge Mount

[Phil.Lmbrt]

Anyone seen this? Seems new from Aeroforce. I've seen this design on RS3's before

[cadguy77]

Anyone seen this? Seems new from Aeroforce. I've seen this design on RS3's before

Looks great.

Shame for me not available in RHD

[Potoczak]

So Aeroforce showed up a day early, nice surprise. I had no issues whatsoever getting the gauge in the pod, no cutting the back out or anything of that sort needed. I even got to use the gauge retainer bracket that comes with the Aeroforce and did not need to use the rubber band or tape it. You can tighten the retainer screws enough to hold the gauge in the pod, but still be able to rotate the face of the gauge to get it level. Pics below:











I have the tape on the pod, but have not applied it yet its just sitting on the column for now. I also ran the cable tied the extra cable up above the kick panel near the OBD plug in. I may re-route it but wanted to see what it looks like first. Seems like this pod will be a good alternative to the Podi if it never comes back.

Can someone tell me what gauge this is? Brand?

[byront8]

Looks great.

Shame for me not available in RHD

I've just done a prototype for a crowd called CJM industries for a RHD defroster vent - will post the final version when i get it

[S4GGIN]

Can someone tell me what gauge this is? Brand?

Aeroforce Interceptor

https://www.aeroforcetech.com/produc...r_audi_vw.html

Sent from my SM-N975U using Audizine mobile app

[cadguy77]

I've just done a prototype for a crowd called CJM industries for a RHD defroster vent - will post the final version when i get it

You have my attention sir

Sent from my SM-G965F using Tapatalk

[byront8]

You have my attention sir

Sent from my SM-G965F using Tapatalk

Rough prototype - but the guys there got interested once I made it quickly! It lands to them next week, and then around two weeks to model up a good version.

I’d be expecting a RHD model in single and dual available within 6-8 weeks

IMG_9936.JPGIMG_9931.JPG



Sent from my iPhone using Audizine

[cadguy77]

Rough prototype - but the guys there got interested once I made it quickly! It lands to them next week, and then around two weeks to model up a good version.

I’d be expecting a RHD model in single and dual available within 6-8 weeks

IMG_9936.JPGIMG_9931.JPG



Sent from my iPhone using Audizine

Looks good so far. What size gauge housing?

Sent from my SM-G965F using Tapatalk

[byront8]

Looks good so far. What size gauge housing?

Sent from my SM-G965F using Tapatalk

Think they will do both a 52mm and 60mm option. That Ali-express gauge pod was a 52mm unit that I sacrificed for the cause!


Sent from my iPhone using Audizine

[Jfonse81]

Custom made this gauge pod and very happy with the results, everyone thinks its factory oem 20200530_100740.jpeg20200527_203746.jpeg20200527_173059.jpeg

Sent from my SM-G973U using Audizine mobile app

[coop3422]

Custom made this gauge pod and very happy with the results, everyone thinks its factory oem 20200530_100740.jpeg20200527_203746.jpeg20200527_173059.jpeg

Sent from my SM-G973U using Audizine mobile app

Looks awesome, but I'm blind and that's way too far away lol.

[cadguy77]

Rough prototype - but the guys there got interested once I made it quickly! It lands to them next week, and then around two weeks to model up a good version.

I’d be expecting a RHD model in single and dual available within 6-8 weeks

IMG_9936.JPGIMG_9931.JPG



Sent from my iPhone using Audizine

Did this get to production?

[Mike2014S4]

I had an issue trying to decide where to mount my boost gauge. There is a hex-screw below the steering wheel to the right that fastens the lower dash to the frame... I made a simple custom metal bracket (90 degree bent) with drilled holes, and I was able to mount my Pro Sport gauge like this:





I personally wanted the car to remain with a factory feel, and felt that I was too old to advertise boost to anyone besides myself so I was pleased with this solution. I do have a P3 gauge that reads boost but this second gauge is a mechanical tap to the intake manifold. I case anyone is wondering it sees about ~1psi larger range of boost/vacuum than the P3, but other than that they have always been on par with one another.