3 bar map sensor

[KingKostas]

Anyone running a 3 bar map sensor? Part # : 038906051C , if u did , did u need a spacer? Thanks


Sent from my iPhone using Audizine

[EvolutionArmory]

Gotta tune for it.

[KingKostas]

Gotta tune for it.

Yea I know that, but I’ve read that it needs an adapter piece or something to fill the gap. Is this true or u know if it will fit snug?


Sent from my iPhone using Audizine

[EvolutionArmory]

I don’t believe there is any size difference or spacer needed.

Nobody has ever mentioned needing one but there’s only a few people here running them. Some folks need bigger o rings to fill the gap with some of the different MAP sensor bungs on FMIC piping but that’s an intercooler pipe issue, not a sensor issue. Maybe that’s what you read about.

[KingKostas]

I don’t believe there is any size difference or spacer needed.

Nobody has ever mentioned needing one but there’s only a few people here running them. Some folks need bigger o rings to fill the gap with some of the different MAP sensor bungs on FMIC piping but that’s an intercooler pipe issue, not a sensor issue. Maybe that’s what you read about.

Possibly, I’ll see when the sensor arrives, thank u


Sent from my iPhone using Audizine

[canadianA4B7]

Remove o ring from your car and use it on the 3 bar. Dab of oil on o ring it should fit. I believe it’s a green o ring.

[rfelker]

my cts intercooler needed a larger one. Green one way to small. Home depot has them.

[KingKostas]

Remove o ring from your car and use it on the 3 bar. Dab of oil on o ring it should fit. I believe it’s a green o ring.

I will see, thank u


Sent from my iPhone using Audizine

[KingKostas]

my cts intercooler needed a larger one. Green one way to small. Home depot has them.

Thank u


Sent from my iPhone using Audizine