Air suspension level indicator in MMI ADS menu

[DJY1993]

Does anyone know how to enable the air suspension level indicator for A6 C7.5 with adaptive air suspension in MMI ADS menu by VCDS or OBDELEVEN.Just like the A6 allroad has a five bar indicator on the top left corner

[Audisthesia]

Do you have a vcds from the allroad?

[Dasquade]

There is good info on the german forums/ fb groups if i recall myself. Kinda forgot but i tought it involved flashing your suspension or mmi module (and there i backed up a bit and chickened out). Would still love to have it as a visual (ideally integrated in my FIS module menu).

[DJY1993]

Do you have a vcds from the allroad?

Don’t have yet. Recently I saw the C8 A6/A6 avant with air suspension has this level indicator in the bottom right of drive select menu. So I'm curious why the C7 platform doesn’t have.

[Audisthesia]

Don’t have yet. Recently I saw the C8 A6/A6 avant with air suspension has this level indicator in the bottom right of drive select menu. So I'm curious why the C7 platform doesn’t have.

Well, c8 is newer, its naturally going to have things c7 doesnt.

[DJY1993]

There is good info on the german forums/ fb groups if i recall myself. Kinda forgot but i tought it involved flashing your suspension or mmi module (and there i backed up a bit and chickened out). Would still love to have it as a visual (ideally integrated in my FIS module menu).

If i understand correctly as you mean, itÂ’s not a
simple work such as change some code or adaptation for control module to active this level indicator. There is a YOUTUBE channel called MtlCarGarage (MtlLine),they uploaded a video about lowering the A6 suspension height ,I leave a comment to ask the same question and hope they can make a video to show the demo about this function,but they only replied me a “yes”. So I’m still trying to find ways to active the indicator but it seems not a easy way to do.

[DJY1993]

Well, c8 is newer, its naturally going to have things c7 doesnt.

There is a YOUTUBE channel called MtlCarGarage (MtlLine),they uploaded a video about lowering the A6 C7 suspension height ,I leave a comment to ask the same question and hope they can make a video to show the demo about making level indicator appear in MMI. But they only replied me a “YES”. May be it’s too complex to active it.

[Audisthesia]

The vcds method to lower air suspension c7/7.5 is on pretty much every audi Form....Ive yet to see anything about level indicator on any of them..

[Dasquade]

->posted in the vcds topic

[gk1]

This post piqued my interest.
I tried looking for something in VCDS that would allow for display of level control. I tried Level Control, 5F, Instruments, CAN, Cent. Conv. etc. etc. I could not find anything.
Perhaps it is something that can be enabled in the Green MMI menu screens? Unfortunately that is something I don't have much details or experience in messing with.

[Dasquade]

This post piqued my interest.
I tried looking for something in VCDS that would allow for display of level control. I tried Level Control, 5F, Instruments, CAN, Cent. Conv. etc. etc. I could not find anything.
Perhaps it is something that can be enabled in the Green MMI menu screens? Unfortunately that is something I don't have much details or experience in messing with.

Like i posted above....nope, only works if you flash your AAS module and load it with the allroad files with VCP. Still some other things you need to correct (the fb post wasn't complete). I'm sure more info on it can be found on motortalk.de forums but it sucks a little to search and translate etc...Definatly not a quick job but would be nice.

[gk1]

Like i posted above....nope, only works if you flash your AAS module and load it with the allroad files with VCP. Still some other things you need to correct (the fb post wasn't complete). I'm sure more info on it can be found on motortalk.de forums but it sucks a little to search and translate etc...Definatly not a quick job but would be nice.

OK cool. Thanks.

[DJY1993]

Like i posted above....nope, only works if you flash your AAS module and load it with the allroad files with VCP. Still some other things you need to correct (the fb post wasn't complete). I'm sure more info on it can be found on motortalk.de forums but it sucks a little to search and translate etc...Definatly not a quick job but would be nice.

I just make the level indicator appear in drive select,the step like you said delete control unit 34 factory data and flash allroad files. I also add allroad mode in drive select,but there is a new problem, As the picture shows when I choose allroad mode,the white line it is in the middle of the car mode menu(under auto and comfort). Under normal circumstances the white line should at left of the ALLROAD characters.

[DJY1993]

Thank you everyone for answering my questions. It seems that the steps are complicated and I have to give up.