Here is my mod list, Its burning rich when it starts. Fouled the plugs after only 10mins of running. It's on stage 1 Eurodyne. I have no 02 sensor's in it ( dont know if that's hurting or not) Now it just cranks with no signs of starting. No misfire codes. When I crank I definitely smell gas. Any ideas?
2006 Audi A3 2.0T FSI- BPY Engine code
PARTS OWNED or MODIFIED-
-new cylinder head- p&p
- 1set titanium nitride coated intake valves 1mm over size
-1 set hollow sodium exhaust valves 1mm over sized
- Super Tech springs and retainers
- new intake and exhaust camshafts
- new rocker arm- Melling
- newlifters- Melling
-new custom turbo ko3 ported outnto k04 size & exhaust manifold p&p
-Forge wastegate and (tuning kit with 12 lb spring installed)
-turbo muffler delete
-Aluminum and silicone intercooler pipes
- Silicone coolant piping
-cold air intake
-runner flap delete
- pcv delete- catch can
-a/c compressor delete
-forged 4340 H beam connecting rod & ARP bolts
-forged pistons A4 BPG machined flat
-king racing connecting rod bearings
- king racing crank bearing
- king racing thrust washer
-water pump metal impeller
-3in. SS Down pipe catless
- DV upgrade
-Stop Tech drilled slotted rotors ( front )
- S3 intercooler
-S3 injectors
- race radiator
- Eurodyne Mastreo tuning suite
- H&R front sway bar
- Sensors- MAP, Coolant, Oil pressure, Air intake temp,
- IE adjustable cam gear
- new valve cover
- Arp head studs
- Stage 2 clutch kit
- Billet dog bone mount
- new lower subframe mounts and insert
-RS4 fuel pressure regulator
-Ferrara lifter shims
- new coolant reservoir black caps for it and washer
- Arp camtower bolts
- Autotech HPFP upgrade
P&P ( port and polished)
Sent from my SM-G950U using Audizine mobile app
Reply With Quote
Bookmarks