anyone running 265/30 square setup on 9.5 wide rims??

[lepooj]

Hey,

anyone running 265/30/19 square setup on 9.5 wide rims??

Specs:
(2) 19x9.5 +43 57.1 5x112 front
(2) 19x9.5 +45 57.1 5x112 rear

apparently it doable with some camber adjustments in the rear, just wondering if any reason i should avoid.

Thanks

[NYEuroTuner]

265/30/19s on 9.0s

BC forged






I am currently running 18x9.5s now with a 265/35/18 R888




Sent from my iPhone using Tapatalk

[lepooj]

265/30/19s on 9.0s

BC forged






I am currently running 18x9.5s now with a 265/35/18 R888




Sent from my iPhone using Tapatalk

Your car is beautiful.. yeah Paul answered me its a good to good, im getting the bcforged rz21
(2) 19x9.5 +43 57.1 5x112 front
(2) 19x9.5 +45 57.1 5x112 rear

[cseaman]

I'm running 265/35/18 square. Neuspeed springs. No rubbing. -1.0 front camber, -1.5 rear.

[andrios]

I’m running 265/30/19 PS4S on 9.5 et45 on stock suspension. Love it.

[Gberg888]

Is the RS3 fender or suspension any different from the S3?

I only ask because I have a set of 19x9.5 ET 45 rims with 265/30/19 tires on them sitting in my garage... if they fit, I will not sell them!! I ask about the S3 because I will end up with one by the end of the month if all goes to plan.

[Gberg888]

Bump

[mtwallace85]

Your car is beautiful.. yeah Paul answered me its a good to good, im getting the bcforged rz21
(2) 19x9.5 +43 57.1 5x112 front
(2) 19x9.5 +45 57.1 5x112 rear

I’m genuinely curious, why didn’t you go with a square setup and run 2mm spacers? Wouldn’t that make it easier to rotate?

[Rs3three]

Is the RS3 fender or suspension any different from the S3?

I only ask because I have a set of 19x9.5 ET 45 rims with 265/30/19 tires on them sitting in my garage... if they fit, I will not sell them!! I ask about the S3 because I will end up with one by the end of the month if all goes to plan.

The guards are wider on the rs3, so more room for tyres.

[Paul@SupremePower]

I’m genuinely curious, why didn’t you go with a square setup and run 2mm spacers? Wouldn’t that make it easier to rotate?

Staggered concavity option. The wheels are already not rotatable because of that so ppl choose to flush out the front more with +43

If square concavity option chosen was chosen it would then make sense to have the specs square as well to rotate.

[mtwallace85]

Staggered concavity option. The wheels are already not rotatable because of that so ppl choose to flush out the front more with +43

If square concavity option chosen was chosen it would then make sense to have the specs square as well to rotate.

Ah, makes sense. Thanks for the explanation!

[Gberg888]

The guards are wider on the rs3, so more room for tyres.

Can I retrofit the guards on the RS3 to the S3?

What guards are you talking about?