The Q5/SQ5 1/4 Mile List

[areed5660]

I would say that with any of the big 3 tuners 93 octane file combined with a good TCU tune, good gas and IAT that are under control even in a high DA they should be running closer to mid 12s @ 110-112mph. In low DA there are STG 1 / TCU tune guys running low 12s @112-113mph . There isn't many people out there taking their STG1 Qs out and getting a 1/4 mile paper slip with them. I'm basing this off of many dragy runs (they don't make this list) and 1/8th mile times I have seen of STG1 Qs with a TCU tune. That being said the TCU tune is usually a HPT tuners with a BGSQ5 file. Its sorted and proven to reduce ETs.

So all that being said i don't think you have run your fastest time yet by a long shot. You should be able to cut a 1.8 60ft pretty easily with the right stall setting and a AMAX launch and if your IAT are under control, good fuel and your shift points @ 7K or higher your MPH should be in the 112mph range give or take. Congratulations on your run ! Its always a blast to get out to the track.

Sent from my SM-N986U using Audizine mobile app

i agree 100% i don't think i have seen my fastest run yet by far. i do believe my issues are in the TCU tune my log from last night was showing shifts that were all over the place.

[Rummunkee]

Name:Rummunkee
ET:13.017
Trap speed:106.36
Density altitude:333
Model (B8/B8.5/B9):B8.5
Trim (SQ5/Q5):SQ5
Engine (3.0T/2.0T/TDI/etc):3.0T
Tcu company:OEM
Ecu company:Unitronic
Ecu file:Uni 2+ 93oct
Fuel:94 oct
Pulley ratio:3.17
Performance mod*list*034 intake tube, Unitronic Stg 2+ single pulley, Art Replica wheels 20x9.
Time slip pic/link:

[MSq5]

Name:Rummunkee
ET:13.017
Trap speed:106.36
Density altitude:333
Model (B8/B8.5/B9):B8.5
Trim (SQ5/Q5):SQ5
Engine (3.0T/2.0T/TDI/etc):3.0T
Tcu company:OEM
Ecu company:Unitronic
Ecu file:Uni 2+ 93oct
Fuel:94 oct
Pulley ratio:3.17
Performance mod*list*034 intake tube, Unitronic Stg 2+ single pulley, Art Replica wheels 20x9.
Time slip pic/link:

Did AMAX not engage? The 2.1 60' makes me think so.