Transmission Belly Pan Hardware

[Chillaxin]

Does anyone have some images of the rear belly pan and hardware under the transmission? I am trying to replace mine (my car didn't have it when I bought it). I believe I need the pan, rubber washers, quick turn fasteners ( like in the front pan) and some plastic push clips for the rear? I'm not exactly sure so a picture would greatly help.

Cheers!

[Theiceman]

yes i went through this
do you have a b8 or a b8.5 ?

[Chillaxin]

yes i went through this
do you have a b8 or a b8.5 ?

I have a B8

[Theiceman]

try this

https://nemigaparts.com/cat_spares/e...q/636u/825000/

after i rebuilt my engine i took it for a spin out on the highway .. i didnt bother putting the engine cover on in case i had leaks .. well... needless to say thats a great place for air to get between the car and the rear underbody cover... lol

[Chillaxin]

try this

https://nemigaparts.com/cat_spares/e...q/636u/825000/

after i rebuilt my engine i took it for a spin out on the highway .. i didnt bother putting the engine cover on in case i had leaks .. well... needless to say thats a great place for air to get between the car and the rear underbody cover... lol

Yea, so specifically, I'm looking for the hardware needed to attach this: https://www.ecstuning.com/b-bremmen-...k1863822j~brp/

[Theiceman]

here ya go

https://nemigaparts.com/cat_spares/e...q/636u/863250/

quatro im assuming

[Chillaxin]

here ya go

https://nemigaparts.com/cat_spares/e...q/636u/863250/

quatro im assuming

You the man!