Audizine - An Automotive Enthusiast Community

Results 1 to 19 of 19
  1. #1
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Full GT2554 kit/THe tuner inlets/Turbosmart Wastegates - $3400

    Guest-only advertisement. Register or Log In now!
    Hi guys,

    I've decided that going a full GT route is overkill for my goals and I'm just going to do a basic stage 3. This is a really nice kit that I got from a fellow AZ member with less than 5k miles on it--I've added the inlets plus a fresh hardware kit to the package and some other things to round it out. These turbos are very well sized for the 2.7 motor and offer a much faster response than the larger GT setups while still putting out high HP numbers. You can use a conservative pump gas tune and run them on stock internals, or build the engine and reach mid 500's on WMI--higher on E85. Please see below for more information on running these and what kind of #'s people have achieved.

    Price is $3400 for Turbos/DP's/Wastegates/Manifolds/Inlets and Hardware.

    I can do $2350 for the Turbos/DP's/Manifolds and hardware.

    What is included:

    2 low mile custom Garrett GT2554r's modified for the B5 -- .8 A/R trim, external wastegate version. These are slightly bigger than OEM RS6's but dual ball bearing. The wheels are very tight and spin easily. See google drive link below for videos of me spinning the wheels.
    2 full 3" Stainless downpipes with 02 sensors included
    2 Stainless Dump tubes (really nice... I hear the sound is cool when shifting)
    2 Custom exhaust headers with flanges for the external wastegates -- I had my machinist carefully inspect these and freshly machine the mating surface so it's dead flat.
    2 New 45mm Turbosmart wastegates with 14psi springs
    A new set of THE tuner GT inlets and silicone connectors -- 63mm to 60mm at the turbo side, 70mm to 2.5" at the Y pipe side
    A full set of V band connectors for everything
    A new set of gaskets, bolts and nuts for the turbos
    A set of oil lines specific to the turbos


    What you will need to do for a perfect fit:

    --The turbosmart flanges will have to be welded in place of the Tial flanges on the headers. Alternatively I can part out the turbosmart units separately and you can get Tial 44mm units that will connect right up via Vband. I was quoted $60 from a good welder to do the work. Otherwise everything is good to go.
    --You'll need a 2.5" Y pipe or just get a 70mm to 2.25" reducer off amazon.

    I've spoken with Blake at ETS and he can easily do a tune for this setup.

    Shipping will be via USPS priority mail, well packaged and insured. SHIPPING IS INCLUDED IN SALE. I'd ask that you pay the PayPal fees if we go that route.

    For some background reading on the GT2554 setup on the B5:

    https://www.audizine.com/forum/archi.../t-289151.html

    Link to google drive of spinning the wheels:

    https://drive.google.com/open?id=13_...yyYEyyk038cX9L

    Thanks guys! Hit me up with any questions. I have a bunch of references for other big sales if you need. My cell is (505) 699-4032 if you want to text or call. Local pickup or viewing available in the Portland, OR area (I'm in Vancouver, WA).

    Chris
    Attached Images
    Last edited by csobel; 12-21-2018 at 07:45 PM. Reason: Updated parts list

  2. #2
    Veteran Member Four Rings
    Join Date
    Aug 04 2013
    AZ Member #
    120269
    Location
    Pennsylvania

    Damn that's a pretty sweet deal

  3. #3
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Quote Originally Posted by Mille Bornes View Post
    Damn that's a pretty sweet deal
    Thanks Mille--I updated the pricing to make it more competitive and also give people the option to just the Turbos/DP's/Manifolds. This is a sweet setup.

  4. #4
    Established Member Two Rings
    Join Date
    Jun 30 2018
    AZ Member #
    421588
    Location
    Portland OR

    Very cool. Hi from Portland..

  5. #5
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Quote Originally Posted by Hog View Post
    Very cool. Hi from Portland..
    Howdy! How's the B5 scene here?

  6. #6
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    There are a couple other things I have available...

    I can throw in a base tune ECU for this package from Blake as well as some brand new Bosch single tip 1000cc injectors. I won't need to go that big with my more mild stage 3.

  7. #7
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Bump -- open to reasonable offers.

  8. #8
    Established Member Two Rings
    Join Date
    Jun 30 2018
    AZ Member #
    421588
    Location
    Portland OR

    Quote Originally Posted by csobel View Post
    Howdy! How's the B5 scene here?
    Good question. First 2.7 (C5 A6).. Just finished an F21 build! Still breaking things in. Do you have intercoolers for sale by chance?

  9. #9
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Quote Originally Posted by Hog View Post
    Good question. First 2.7 (C5 A6).. Just finished an F21 build! Still breaking things in. Do you have intercoolers for sale by chance?
    I doI have some OEM RS4s in really good condition with a silicone hose set. I have them up for sale here as of a couple days ago. Youre welcome to come check them out anytime.

    Thanks,

    Chris

  10. #10
    Active Member One Ring
    Join Date
    Dec 05 2018
    AZ Member #
    432617
    Location
    Orange county

    still for sale?

  11. #11
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Quote Originally Posted by Integrated_s4 View Post
    still for sale?
    Hi,

    Yes, it's still for sale. I just added some custom silicone reducers for the turbo and Y pipe side so everything should be seamless now.

    Chris

  12. #12
    Veteran Member Three Rings m_haiser's Avatar
    Join Date
    Apr 24 2011
    AZ Member #
    74529
    My Garage
    Highland Green Allroad
    Location
    Oregon Coast

    free bump from the PNW! looks like a great setup and pretty damn good price

  13. #13
    Active Member One Ring
    Join Date
    Dec 05 2018
    AZ Member #
    432617
    Location
    Orange county

    Message me. I'd like to talk about buying

  14. #14
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Quote Originally Posted by Integrated_s4 View Post
    Message me. I'd like to talk about buying
    PM sent.

  15. #15
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Bump.

  16. #16
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Inlets have sold.

    GT turbos, manifolds, downpipes, wastegates plus hardware - $2650

    Thanks!

  17. #17
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Bump!

  18. #18
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    Final price drop - $2300 for the package shipped.

  19. #19
    Established Member Three Rings csobel's Avatar
    Join Date
    Mar 25 2018
    AZ Member #
    416107
    Location
    Portland, OR

    SOLD, thanks everyone!



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2019 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.