Audizine - An Automotive Enthusiast Community

Results 1 to 7 of 7
  1. #1
    Active Member One Ring
    Join Date
    Sep 09 2018
    AZ Member #
    426499
    Location
    Ohio

    Schwaben code reader

    Guest-only advertisement. Register or Log In now!
    Okay so I bought a schwaben code reader, Iím following the steps Iíve read are necessary. But how the fuck do I log in. You need to do a log in before anything else. Iím trying to Re-code the ABS Module I installed. If anyone has any experience with these itíd be much appreciated. Thanks you.

  2. #2
    Registered Member Four Rings EuroxS4's Avatar
    Join Date
    Jan 24 2010
    AZ Member #
    53856
    My Garage
    2003 Atlas Grey A4 Avant 1.8T 6speed manual quattro,2002 GSXR 600
    Location
    Paramus,NJ USA

    I normally used VCDS schwaben reader is made by foxwell.I would assume it comes with a manual.
    VW/Audi Immobilizer removal and immobilizer adapting solutions for any and all VAG Vehicles,Odometer matching, SKC/Pin retrieval services.Located in Northern NJ.For inquries pm for details.

  3. #3
    Active Member One Ring
    Join Date
    Sep 09 2018
    AZ Member #
    426499
    Location
    Ohio

    Quote Originally Posted by EuroxS4 View Post
    I normally used VCDS schwaben reader is made by foxwell.I would assume it comes with a manual.
    Yes of course, which doesnít help on this matter. Went through the thing like 4 times.

  4. #4
    Registered Member Four Rings EuroxS4's Avatar
    Join Date
    Jan 24 2010
    AZ Member #
    53856
    My Garage
    2003 Atlas Grey A4 Avant 1.8T 6speed manual quattro,2002 GSXR 600
    Location
    Paramus,NJ USA

    Quote Originally Posted by DustyA4 View Post
    Yes of course, which doesnít help on this matter. Went through the thing like 4 times.
    You need to follow login from vcds wiki

    http://wiki.ross-tech.com/wiki/index...sch_5.7)#Login
    VW/Audi Immobilizer removal and immobilizer adapting solutions for any and all VAG Vehicles,Odometer matching, SKC/Pin retrieval services.Located in Northern NJ.For inquries pm for details.

  5. #5
    Veteran Member Three Rings Let it snow's Avatar
    Join Date
    Aug 24 2014
    AZ Member #
    277415
    My Garage
    02 1.8TQ Sport 5 speed, 05 1.8TQ 6 speed
    Location
    Vermont

    Quote Originally Posted by DustyA4 View Post
    Okay so I bought a schwaben code reader, Iím following the steps Iíve read are necessary. But how the fuck do I log in. You need to do a log in before anything else. Iím trying to Re-code the ABS Module I installed. If anyone has any experience with these itíd be much appreciated. Thanks you.
    Log in? Are you talking about the tool itself or the website? The tool should be plug and play. You have to create a log in ID for the website for registering the product and software updates. --- Edit ----Sorry i think Euro gave you the answer you are looking for.

  6. #6
    Active Member One Ring
    Join Date
    Sep 09 2018
    AZ Member #
    426499
    Location
    Ohio

    Quote Originally Posted by EuroxS4 View Post
    You need to follow login from vcds wiki

    http://wiki.ross-tech.com/wiki/index...sch_5.7)#Login
    I followed the login. It doesnít give instructions as to how to log in though, simply states you need to. And not only that, my particular Audi has 17in Rims, I have the paper from the day it was purchased and the person bought them as an add on for $500, HOWEVER, the sheet with my coding from the spare tire well says my package has 15in.. and not only that, the sheet DOES NOT have a could for transmission, I have the slap shifter so I think itís multitronic. However it doesnít state. Iíve tried both 15Ē coding and 17Ē coding neither worked, however I tried them with ďautomaticĒ coding.

  7. #7
    Registered Member Four Rings EuroxS4's Avatar
    Join Date
    Jan 24 2010
    AZ Member #
    53856
    My Garage
    2003 Atlas Grey A4 Avant 1.8T 6speed manual quattro,2002 GSXR 600
    Location
    Paramus,NJ USA

    Quote Originally Posted by DustyA4 View Post
    I followed the login. It doesnít give instructions as to how to log in though, simply states you need to. And not only that, my particular Audi has 17in Rims, I have the paper from the day it was purchased and the person bought them as an add on for $500, HOWEVER, the sheet with my coding from the spare tire well says my package has 15in.. and not only that, the sheet DOES NOT have a could for transmission, I have the slap shifter so I think itís multitronic. However it doesnít state. Iíve tried both 15Ē coding and 17Ē coding neither worked, however I tried them with ďautomaticĒ coding.
    if you cant login.It wount let you change the coding.Simple as that.You need to login into the module and enter login code before any changes can be made.Is there a login selection when entering menu for abs module on the scanner??

    VCDS login procedure.I would assume schwaben is very similar if not the same.

    https://www.youtube.com/watch?v=DvJ8ILKfhS8
    VW/Audi Immobilizer removal and immobilizer adapting solutions for any and all VAG Vehicles,Odometer matching, SKC/Pin retrieval services.Located in Northern NJ.For inquries pm for details.



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.