Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5

Thread: Spacers size?

  1. #1
    Senior Member Three Rings mikedizzzo's Avatar
    Join Date
    Nov 03 2016
    AZ Member #
    384501
    Location
    So Cal

    Spacers size?

    Guest-only advertisement. Register or Log In now!
    I running on stock 20' OEM rims that came with the black optics package on my 2016 S5. What size spacers would i need?

    Pic attached of the rims I am currently running on.

    TIA.
    Attached Images
    -MikeDizzzo

    2016 S5 Premium Plus | Florett Silver | Black Optic Plus Package | DSG | ADS | Carbon Atlas | B&O

    Mods: GIAC Stage 2 | TCU | SC Pulley | AWE Touring Exhaust 90mm | CTS Intake | OEM RS5 Grill | Poor man's Ecodes | Maxton V1 Front Lip | Brakes - Hawks Pro with slotted/dimpled rotors | Ceramic Pro 9H | LED interior | LED HCX 3000k Fog lights | 2 x Audizine 5' stickers | Audi All Weather S5 floor mats

  2. #2
    Veteran Member Three Rings 01northernS4's Avatar
    Join Date
    Oct 18 2006
    AZ Member #
    12690
    Location
    Audiville

    Quote Originally Posted by mikedizzzo View Post
    I running on stock 20' OEM rims that came with the black optics package on my 2016 S5. What size spacers would i need?

    Pic attached of the rims I am currently running on.

    TIA.
    I'm running 10mm front and 15mm rear... perfectly flush and I believe my wheels have the same specs as yours.

    Had to pull the front liner screw at the top of the inner fender liner.

    At the rear had to do the same with a nub... ground it down a bit and painted it... sticks out inner fender liner at approximately 10 o'clock position.

    I'm running 275 width and I don't rub with the above performed on my car... if your offset is less or narrower tire you may be ok not doing any of that... but really not a big deal to do so front screw removal and grind down nub rear... bingo done quick and easy.
    Last edited by 01northernS4; 12-01-2018 at 01:41 PM.
    2015 Audi S5 Coupe
    Technik | Mythos Black on Black | Black Optics | Carbon Interior Trim | Carbon Supercharged Badges | Miltek Resonated Sport Cat Back Exhaust W/Black Cerakote GT100's | DSG | ADS | Sport Diff | B&O | Pinnacle 30% Tint | H&R OE Sport Springs | 10F/15R H&R Spacers | 20"x9" Black Matte Rotors - 275/30 Continental DWS | 19"x9" Titanium Rotors - 255/35 Blizzak LM-32

  3. #3
    Senior Member Three Rings mikedizzzo's Avatar
    Join Date
    Nov 03 2016
    AZ Member #
    384501
    Location
    So Cal

    Quote Originally Posted by 01northernS4 View Post
    I'm running 10mm front and 15mm rear... perfectly flush and I believe my wheels have the same specs as yours.

    Had to pull the front liner screw at the top of the inner fender liner.

    At the rear had to do the same with a nub... ground it down a bit and painted it... sticks out inner fender liner at approximately 10 o'clock position.

    I'm running 275 width... if your offset is less or narrower tire you may be ok.
    Think Iím at 265/35/20


    Sent from my iPhone using Audizine
    -MikeDizzzo

    2016 S5 Premium Plus | Florett Silver | Black Optic Plus Package | DSG | ADS | Carbon Atlas | B&O

    Mods: GIAC Stage 2 | TCU | SC Pulley | AWE Touring Exhaust 90mm | CTS Intake | OEM RS5 Grill | Poor man's Ecodes | Maxton V1 Front Lip | Brakes - Hawks Pro with slotted/dimpled rotors | Ceramic Pro 9H | LED interior | LED HCX 3000k Fog lights | 2 x Audizine 5' stickers | Audi All Weather S5 floor mats

  4. #4
    Veteran Member Four Rings s vier's Avatar
    Join Date
    Dec 10 2006
    AZ Member #
    14085
    My Garage
    2015 RS5
    Location
    Milwaukee

    I have (2) ECS 15mm spacers with extended Lugs that I used to mock up my RS5 with its wheels. $55 shipped if you want them.
    2015 Suzuka RS5 Black Optics+Carbon Ceramics-Euro Recaro Bucket -Akrapovic -AWE DPs-Ecodes-Euro fold CF Neidfaktor mirrors-3M+Suntech(whole car)-CR15-Red START button-034 diff carrier inserts-BBS CH-R 10.5x20 et25

    IG: GERMANBrew

  5. #5
    Senior Member Two Rings Mrads's Avatar
    Join Date
    Dec 20 2012
    AZ Member #
    106150
    My Garage
    Subaru TriBeCa (Wife's DD), B6 A4 (son's DD). B6 A4 Ultra Sport (other son's DD)
    Location
    New Westminster, BC, Canada

    Quote Originally Posted by 01northernS4 View Post
    I'm running 10mm front and 15mm rear... perfectly flush and I believe my wheels have the same specs as yours.

    Had to pull the front liner screw at the top of the inner fender liner.

    At the rear had to do the same with a nub... ground it down a bit and painted it... sticks out inner fender liner at approximately 10 o'clock position.

    I'm running 275 width... if your offset is less or narrower tire you may be ok.
    This. 10 front and 15 rear

    Sent from my Pixel 2 XL using Audizine mobile app



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.