
Originally Posted by
kupe
High beam - 3 LED working + extra light in the outer ones ( 4 leds working )
It seems like High beams are delivered by moving a mirror piece in place. I can hear and see movement when the car isn't running and I turn on high beams. I haven't found any exploded diagrams of the headlight since they are considered a single unit, but that's my best guess.

Originally Posted by
kupe
1 Fault Found:
764928 - Left/Right Driving Switch-Over Active
C1080 00 [009] - -
Confirmed - Tested Since Memory Clear
And when starting on flash screen displays :
"Headlight range control: Headlamp converter active. Range reduced"
Here's a few of my codes when mine were out:
03641 - Output Module for LED Headlamps; Right
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 122
Mileage: 195063 km
Time Indication: 0
Date: 2017.07.27
Time: 17:04:00
03642 - Output Module 2 for LED Headlamps; Right
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 3
Fault Frequency: 2
Reset counter: 122
Mileage: 195060 km
Time Indication: 0
Date: 2017.07.27
Time: 13:02:00
02235 - Stationary Cornering Lamp (Left) (M51)
012 - Electrical Fault in Circuit - Intermittent
Freeze Frame:
Fault Status: 00101100
Fault Priority: 3
Fault Frequency: 7
Reset counter: 120
Mileage: 194906 km
Time Indication: 0
Date: 2017.07.24
Time: 11:58:00
03804 - Supply Voltage for Left Headlamp
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 3
Fault Frequency: 1
Reset counter: 112
Mileage: 194893 km
Time Indication: 0
Date: 2017.07.24
Time: 07:16:00
Bookmarks