Address 19: CAN Gateway Labels: 4F0-910-468.clb

Part No SW: 4F0 910 468 A HW: 4F0 907 468 B

Component: Gateway H09 0030

Revision: 09 Serial number: 0800804C1603E3

Coding: ECFE73CC1B7904

Shop #: WSC 02325 785 00200

VCID: 2756F4D896DC9A7982-8072



1 Fault Found:

00470 - Company Comfort Databus in Single Wire

011 - Open Circuit

Freeze Frame:

Fault Status: 01101011

Fault Priority: 3

Fault Frequency: 1

Reset counter: 5

Mileage: 305068 km

Time Indication: 0

Date: 2016.05.07

Time: 20:47:05

Address 42: Door Elect, Driver Labels: 4F0-910-793-42.lbl

Part No SW: 4F0 910 793 B HW: 4F0 959 793 B

Component: TSG FA H11 0040

Revision: 00000000 Serial number: "Fg

Coding: 0035563

Shop #: WSC 08353 444 84413

VCID: 2952F2E080C8AC0994-807C



1 Fault Found:

00532 - Supply Voltage B+

011 - Open Circuit

Freeze Frame:

Fault Status: 01101011

Fault Priority: 2

Fault Frequency: 254

Reset counter: 0

Mileage: 309902 km

Time Indication: 0

Date: 2016.07.10

Time: 15:55:17

driver door jamb wire harness was broken causing door lock button to not light up, mirrors do not fold, and door does not lock with button only with key. replaced wire harness going to the a pillar, that did not fix it. replaced door module, that did not fix it. What else can it be? i did notice the a-pillar socket looks corroded. could that have damage confort unit? do i need new socket? new socket wiring? any help is appreciated