Audizine - An Automotive Enthusiast Community

Results 1 to 4 of 4
  1. #1
    Stage 2 Banner Advertiser Four Rings Arin@APR's Avatar
    Join Date
    Aug 23 2008
    AZ Member #
    32286
    Location
    Auburn, AL

    APR Roll-Control Front Stabilizer Bar End Links

    Guest-only advertisement. Register or Log In now!
    Product Page

    APRís Roll-Control Front Stabilizer Bar End Links improve handling and response through the use of replaceable and swappable spherical bearings, intended for race use, and our upcoming ball joins, intended for street use. The end links offer a great range of adjustability in both connection geometry and height, allowing elimination of pre-loading and correction of stabilizer bar geometry. This is a necessary upgrade when altering the factory suspension components to allow correct operation and maximum performance.

    Spherical







    Ball Joint (Coming Soon)



    - Ultra-wide adjustability range: 255mm to 340mm vs 335mm stock
    - CNC-machined billet-aluminum center rods with three large set points
    - Stainless-steel, high-misalignment linkages with up to 70į on each links vs 65į stock
    - Spherical Bearings
    -- Designed for race / track use (High noise, vibration and harshness (NVH))
    -- 12mm chromoly rod ends
    -- Heavy duty chromoly body with hard chrome ball race for corrosion resistance
    -- Self-sealing and self-lubricating PTFE ball race to keep dirt and debris out of the bearing
    -- Bootless design eliminates accelerated wear, as is common with open boots that allow dirt to become trapped within
    - Ball Joints
    -- Designed for street use (Less NVH)
    -- Balanced load distribution via high sphericity balls
    -- Ultra-durable POM seats for low friction and high wear resistance
    -- Ball pins polished to a mirror finish
    -- Clip fastened boot design that reduces contamination with a high performance grease within
    -- Replaceable and swappable between spherical and ball joints rod ends on the same link
    - Left hand and right hand threaded rod ends for easy turnbuckle-style length adjustments
    - Zinc-plated and stainless-steel hardware for durability

    APR Roll-Control Front Stabilizer Bar End Links - Spherical
    MS100182
    $249.99

    APR Roll-Control Front Stabilizer Bar End Links - Ball Joint
    MS100183
    Coming Soon

    Product Page
    GoAPR.com | Facebook | YouTube | Twitter | Instagram
    Phone: (800) 680-7921 Local Phone: +1 (334) 502-5181 Fax: +1 (334) 502-5180
    Address: APR LLC, 4800 US HWY 280 West, Opelika, AL 36801

  2. #2
    Senior Member Three Rings wasup0818's Avatar
    Join Date
    Dec 07 2005
    AZ Member #
    9123
    Location
    US

    does this work with only aftermarket sway bar or will my car get benefit from adding this to my stock sway bar?

  3. #3
    Established Member Two Rings
    Join Date
    Jan 02 2017
    AZ Member #
    389662
    Location
    Lanc PA USA

    Please donít tease us with product until it is actually ready for the market..
    itís all making sense now, based on the the timeline of the S3 exhaust, these end links will be ready for purchase by Q1 2020!!

  4. #4
    Stage 2 Banner Advertiser Four Rings Arin@APR's Avatar
    Join Date
    Aug 23 2008
    AZ Member #
    32286
    Location
    Auburn, AL

    Quote Originally Posted by wasup0818 View Post
    does this work with only aftermarket sway bar or will my car get benefit from adding this to my stock sway bar?
    You can use this on your stock bars too.
    GoAPR.com | Facebook | YouTube | Twitter | Instagram
    Phone: (800) 680-7921 Local Phone: +1 (334) 502-5181 Fax: +1 (334) 502-5180
    Address: APR LLC, 4800 US HWY 280 West, Opelika, AL 36801



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.