Audizine - An Automotive Enthusiast Community

Results 1 to 16 of 16
  1. #1
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Rear ashtray lid

    Guest-only advertisement. Register or Log In now!
    I'm looking for a rear ashtray lid, if someone has one laying around from a part out or something. Bought a carbon trim set, and I had factory fishscale. The rear ashtray lid on fishscale is not removable like on the others(carbon, wood trim). So I just need the lid, without the trim. Attatched. Thanx

    Sent from my VS995 using Audizine mobile app

  2. #2
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Bump

    Sent from my VS995 using Audizine mobile app

  3. #3
    Senior Member Four Rings rhfosu's Avatar
    Join Date
    Jan 01 2015
    AZ Member #
    306948
    Location
    DC

    Quote Originally Posted by Jayz691 View Post
    I'm looking for a rear ashtray lid, if someone has one laying around from a part out or something. Bought a carbon trim set, and I had factory fishscale. The rear ashtray lid on fishscale is not removable like on the others(carbon, wood trim). So I just need the lid, without the trim. Attatched. Thanx

    Sent from my VS995 using Audizine mobile app
    Really? I wonder why?? Fvcking Audi.
    "I don't understand Audi enthusiasts. They buy a car that looks like a bar of soap, then they spend money modifying it so it looks slightly less like a bar of soap."

  4. #4
    Senior Member Four Rings eljay's Avatar
    Join Date
    Aug 13 2015
    AZ Member #
    348695
    Location
    NS

    Yes, you can remove the fishscale trim from the lid. You need to carefully bend the tabs on the bottom of the lid and the trim slides out. Then you can apply (glue/tape?) the carbon trim onto the lid.
    2005 Audi A4 1.8T Quattro Avant / 6-speed / Ultrasport - Unicorn rescue operation in progress.
    WTB: Mint condition silver B6 passenger fender.

  5. #5
    Veteran Member Four Rings
    Join Date
    Sep 02 2008
    AZ Member #
    32595
    Location
    Boonies VA

    Quote Originally Posted by eljay View Post
    Yes, you can remove the fishscale trim from the lid. You need to carefully bend the tabs on the bottom of the lid and the trim slides out. Then you can apply (glue/tape?) the carbon trim onto the lid.
    Yep, I had to do this with mine. Not too difficult of a job at all, I think there are 4 or 6 tabs and then it slides off.
    White Wagon
    MiniDSP C-DSP 8x12, Alpine PDX-V9 & PDX-F4, a few speakers here and there

    Twitter/Instagram: IDFront

  6. #6
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    I don't wanna break the pieces off the trim that mount it, and just glue it. I know the fishscale comes off easy, I had it off. Thats how I knew it was different. Want a lid to mount it correctly, thats all.

    Sent from my VS995 using Audizine mobile app

  7. #7
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Quote Originally Posted by naiku View Post
    Yep, I had to do this with mine. Not too difficult of a job at all, I think there are 4 or 6 tabs and then it slides off.
    But I can't mount new piece(correctly) without cutting the little nubs off my trim, and glueing it. Don't wanna do that.

    Sent from my VS995 using Audizine mobile app

  8. #8
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Bump, still need one please.

    Sent from my VS995 using Audizine mobile app

  9. #9
    Veteran Member Four Rings aluthman's Avatar
    Join Date
    Mar 24 2013
    AZ Member #
    111961
    Location
    Oakdale, CT

    Check ebay, there are normally a ton on there.
    -Adam

    '07 DTM A4 2.0T|6MT|EFR 7163 Twin Scroll|DoTuning|Built Motor|Meth and other go fast stuff…
    '06 A4 2.0T Quattro - RIP (Best ¼ mile pass 13.634 @ 103.30)

  10. #10
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Quote Originally Posted by aluthman View Post
    Check ebay, there are normally a ton on there.
    Only ones with trim for $50-$60. I don't need the trim, so don't wanna pay for it. Only need the lid.

    Sent from my VS995 using Audizine mobile app

  11. #11
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Bump. Nobody have one of these laying around??

    Sent from my VS995 using Audizine mobile app

  12. #12
    Veteran Member Four Rings aluthman's Avatar
    Join Date
    Mar 24 2013
    AZ Member #
    111961
    Location
    Oakdale, CT

    Quote Originally Posted by Jayz691 View Post
    Only ones with trim for $50-$60. I don't need the trim, so don't wanna pay for it. Only need the lid.

    Sent from my VS995 using Audizine mobile app
    https://www.ebay.com/itm/Genuine-Aud...oAAOSw3WxaCvFg
    -Adam

    '07 DTM A4 2.0T|6MT|EFR 7163 Twin Scroll|DoTuning|Built Motor|Meth and other go fast stuff…
    '06 A4 2.0T Quattro - RIP (Best ¼ mile pass 13.634 @ 103.30)

  13. #13
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    The black material ones I believe are like the fishscale and aluminum. They don't have trim piece that pops off. I just need the lid, minus trim, to fix my carbon trim to.IMG_153720710890F.jpg0915181604.jpeg

    Sent from my VS995 using Audizine mobile app

  14. #14
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    Bump. Still looking.

    Sent from my VS995 using Audizine mobile app

  15. #15
    Established Member Three Rings
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    Location
    frackville, pa US

    No luck yet.

    Sent from my VS995 using Audizine mobile app

  16. #16
    Registered Member Four Rings
    Join Date
    Aug 02 2015
    AZ Member #
    346457
    Location
    Corning NY

    i have one
    2014 Phantom Black Pearl S4: too many things done to it
    2007 Mugello Blue RS4: too many things done to it

    Follow my Instagram @Pyro_S4
    Badges and Carbon... ^^^



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.