Direct TPMS Installation Guide

[BeTTo RS]

Hey guys,
I picked up the kit from Eurozone. The wire colors aren't matching what I have, but the adapter they provided seems like a better setup. I assume I'm supposed to de-pin the car's connector and put those pins into the Eurozone connector, then run the pigtail to the OEM harness. However, I don't know what colors go where. I have Orange/Brown, Orange/Gray, and Gray. Also unclear has to how to tap the fuse holder for power (assuming my Gray wire?) given what I have. Looking for guidance.

My wires:


OEM Harness w/ 2 Orange/Brown wires:

Good luck on that one! If you contact them and ask them for guidance or even instructions. Could you put the link to their kit, I would love to do this retrofit.

Thanks in advance!

[Solution]

Good luck on that one! If you contact them and ask them for guidance or even instructions. Could you put the link to their kit, I would love to do this retrofit.

Thanks in advance!

Link is in my post.

[BeTTo RS]

Link is in my post.

Thanks!