Audizine - An Automotive Enthusiast Community

Results 1 to 2 of 2
  1. #1
    Registered Member One Ring
    Join Date
    Sep 01 2013
    AZ Member #
    122289
    Location
    Pittsburgh PA

    Odd issue, please help

    Guest-only advertisement. Register or Log In now!
    I hope this isn't somewhere easy to find. I looked...

    After not driving the car for a couple months, because it needed brakes and life was intervening, upon starting it to move it the other day to do the brakes, I got a whole bunch of dash warnings about ABS related systems. I did all four sets of brakes, rotors and pads, and still get errors for TPMS, ABS, ESC, Parking Brake, etc...

    After pulling the VCDS codes, I have a bunch of codes in modules for tpms and parking brake and awd, etc, all referencing an abs module fault, but with NO CODES for the abs module. Finally, after scanning just the ABS module several times, I got the following at the end of the post. Do you think I should just start looking at the wheel speed sensor, or should I be looking somewhere else? The parking brake works properly, and cycled as it should when replacing the brakes. Everything was fine, other than needing new rotors and new front pads when I parked it. THANK YOU!!!

    Faults Found:

    00285 - ABS Wheel Speed Sensor; Front Right (G45)
    012 - Electrical Fault in Circuit - MIL ON
    Freeze Frame:
    Fault Status: 11101100
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 72
    Mileage: 113689 km
    Time Indication: 0
    Date: 2018.08.12
    Time: 17:33:30

    Freeze Frame:
    Hex Value: 0x00C0
    Hex Value: 0x4782
    Hex Value: 0x0007
    Hex Value: 0xB09F
    Hex Value: 0x00FF

    01324 - Control Module for All Wheel Drive (J492)
    013 - Check DTC Memory
    Freeze Frame:
    Fault Status: 01101101
    Fault Priority: 4
    Fault Frequency: 1
    Reset counter: 72
    Mileage: 113689 km
    Time Indication: 0
    Date: 2018.08.12
    Time: 17:33:30

    Freeze Frame:
    Hex Value: 0x00C0
    Hex Value: 0x4782
    Hex Value: 0x0028
    Hex Value: 0x509F
    Hex Value: 0x00FF

    00473 - Control Module for Elect. Park/Hand Brake (J540)
    013 - Check DTC Memory
    Freeze Frame:
    Fault Status: 01101101
    Fault Priority: 6
    Fault Frequency: 1
    Reset counter: 72
    Mileage: 113689 km
    Time Indication: 0
    Date: 2018.08.12
    Time: 17:33:30

    Freeze Frame:
    Hex Value: 0x00C0
    Hex Value: 0x4782
    Hex Value: 0x0032
    Hex Value: 0x029F
    Hex Value: 0x00FF

  2. #2
    Veteran Member Four Rings TexasDfwS4's Avatar
    Join Date
    Sep 10 2012
    AZ Member #
    100226
    Location
    DFW

    Question did you need to jump the car? If so that would explain it. Two months is a long time not to use the car and the computer is meant to be used. I think if you cleared the code knowing your battery is good I would thing it's guest glitches in the system.
    Gone 2013 B8.5 S4 Ice Silver, DSG, Uni 2+TCU, Prestige Model, MMI, B&O, Fine Napa, Sports Diff, audi assist, 19" Peelers, Carbon Atlas Inlays.
    2017 Q5 3.0 Ibis W/ BO with S-line
    2018 SQ5 Ibis Prestige Red Calipers Fine Napa Leather



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.