Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5
  1. #1
    Veteran Member Three Rings nistah's Avatar
    Join Date
    Jan 20 2014
    AZ Member #
    139563
    My Garage
    2004 AUDI C5 RS6
    Location
    Washington DC

    Audi C5 RS6 Aftermarket wheel fitment question

    Guest-only advertisement. Register or Log In now!
    Previously on my RS6 I've run OEM S4 Peelers with 43MM offset which required spacers and 57.1MM-66.56MM hub bore adapters, switched the peelers out and now run OEM RS4 wheels which are 29 ET offset no spacers needed with the RS4 OEM wheels. I am looking at running a new set of really nice set of staggered HRE P43 wheels that are 19x9 ET24 front and 19x9 ET19 rear? Is it possible & if yes do fenders need to be rolled? Thanks!
    Current: Black Pearl Metallic Effect/Ebony, Peelers, RNS-E, + pedals, oCarbon
    Past: Daytona Grey Pearl Effect/Silver ,Eurocharged ECU Tune, MTM TCU Tune, RNS-E, Michelin PS2's - SOLD

  2. #2
    Veteran Member Four Rings rollerton's Avatar
    Join Date
    Sep 16 2010
    AZ Member #
    64156
    My Garage
    S6 Avant X TWO! and 67' Speed buggy
    Location
    Central Wash
    Items for Sale

    Once you get below about ET35 they almost always fit. Below ET30 I can't imagine *needing* spacers, even though you may want them. Adding a 10mm spacer to an ET30 wheel gives you low offset; but final good fitment and fender rolling depends a little on tires and stance too.
    foley803 : What does an electrical surge sound like? Barking dogs? Watermelons?

  3. #3
    Active Member One Ring
    Join Date
    Mar 08 2013
    AZ Member #
    110948
    Location
    Seattle

    I'm running 19X10 ET30 with 265/35/19 PSS and don't have an issue in the rear. Your new setup would be 1-2mm less poke, which seems like it would work, but that would also depend on tire size, tire profile, and suspension setup.

    https://www.willtheyfit.com/index.ph...h=9&offset2=19

  4. #4
    Veteran Member Three Rings nistah's Avatar
    Join Date
    Jan 20 2014
    AZ Member #
    139563
    My Garage
    2004 AUDI C5 RS6
    Location
    Washington DC

    Thanks guys I have a set of 265/35/19 Michelin Pilot Super Sports and a set of 255/35/19 Conti DSW06 Extreme Contact that I could use with set of staggered HRE P43 wheels that are 19x9 ET24 front and 19x9 ET19 rear.
    Current: Black Pearl Metallic Effect/Ebony, Peelers, RNS-E, + pedals, oCarbon
    Past: Daytona Grey Pearl Effect/Silver ,Eurocharged ECU Tune, MTM TCU Tune, RNS-E, Michelin PS2's - SOLD

  5. #5
    Established Member Three Rings JorisRS6's Avatar
    Join Date
    Jun 06 2017
    AZ Member #
    400688
    My Garage
    2003 RS6
    Location
    Norwich

    The et 19 will be very agressive. Im running et25 all around. Its possible i think.



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.