EXCELERATE PERFORMANCE PRESENTS

iAbed Industries Billet Rear Main Seal for the 2.0T TSI Applications



Do you own a 2.0T TSI powered VW or Audi?


Have you had pesky oil leaks or have been chasing other drivability issues for what seems to be an eternity? First, we are sorry to hear that,
but we have some seriously good news for you if you are in this scenario. With this good news comes great information, this information
will help you find the right parts to properly make your repairs.

If you donít know of iAbed Industries maybe you recall the name INA Engineering. These two companies are one in the same and founded
by Issam Abed. IAbed Industries has been engineering custom performance parts; complete fails safe solutions and much more for the
VW and Audi market for more than a decade. Needless to say the company prides themselves in innovation and persistence to further advance
the reliability and overall longevity of modern VW/Audi engines.

The FSIís rear main seal is cast flange construction with PTFE seal. The iAbed Industries solution uses a billet machined plate that accommodates
a spring loaded lip seal from Elring. This design is more heat and fluid resistant, and provides far superior longevity. This seal will makes you feel
a whole lot more confident when installing the new part and say goodbye to pulling your transmission again (unless you need a flywheel or clutch replaced)

Whether you are looking to fix a problem or enhance performance you can expect the same thought, design, engineering,
fit, finish and overall end result to be just about the same with every part. The 2.0T was a great advancement of the 1.8T engine, but iAbed looks
at engines from an engineering standpoint and how to make something good, great. That is what he did here to further advance the TSI powered platforms and for the
greater good of those who drive these cars every day.

So, how can you get your hands on one of these awesome little contraptions? You can find them here on the webstore.