Audizine - An Automotive Enthusiast Community

Results 1 to 7 of 7
  1. #1
    Active Member Three Rings
    Join Date
    Jan 01 2018
    AZ Member #
    411883
    Location
    utah

    Meth controller mounting

    Guest-only advertisement. Register or Log In now!
    Where is everyone mounting their meth controllers at? I have a aem failsafe gauge so do need access to the controller all the time.

    Sent from my SM-N950U using Audizine mobile app

  2. #2
    Senior Member Three Rings Bob Marley's Avatar
    Join Date
    Jan 18 2016
    AZ Member #
    367370
    Location
    Queens NY

    Quote Originally Posted by travis_w View Post
    Where is everyone mounting their meth controllers at? I have a aem failsafe gauge so do need access to the controller all the time.

    Sent from my SM-N950U using Audizine mobile app
    I feel like i'm taking a slight risk... but I also don't see the need to access it at all once set... I have I mounted under the hood next to the ECU box... fairly water proof there... wrapped in a little plastic and zip tied.

    I use the external LED mounted on my dash to monitor activity

    Sent from my SM-N950U using Tapatalk

  3. #3
    Senior Member Three Rings Bob Marley's Avatar
    Join Date
    Jan 18 2016
    AZ Member #
    367370
    Location
    Queens NY

    Quote Originally Posted by travis_w View Post
    Where is everyone mounting their meth controllers at? I have a aem failsafe gauge so do need access to the controller all the time.

    Sent from my SM-N950U using Audizine mobile app
    ...i'm curious... what are you're Meth controller settings?

    What stage & power setup are you running?

    Sent from my SM-N950U using Tapatalk

  4. #4
    Active Member Three Rings
    Join Date
    Jan 01 2018
    AZ Member #
    411883
    Location
    utah

    Quote Originally Posted by Bob Marley View Post
    ...i'm curious... what are you're Meth controller settings?

    What stage & power setup are you running?

    Sent from my SM-N950U using Tapatalk
    I haven't even finished getting everything buttoned up. Just trying to find a good place for it.

    Sent from my SM-N950U using Audizine mobile app

  5. #5
    Senior Member Four Rings christianb5s4's Avatar
    Join Date
    Aug 24 2014
    AZ Member #
    277489
    Location
    Newport Beach, CA
    Items for Sale

    I'm assuming you meant that you don't need access to it all the time. I mounted my AEM controller behind the little cover on the driver's side of the dash inside that open area behind the cover. Fits perfectly and makes wiring routing cleaner.
    Imola 2001 Stage 3 S4: 312K - 2.4sec FATs - Completely Refreshed/Built Motor - SRM K24s w/ Custom Turbosmart wastegates - Clutchmasters Stage 4 - Etspec - Cinesnow WG/Oil Lines - SRM V3 Intercoolers - AA built trans - 4:1 Diff - JHM Trio - 034 - H&R Coilovers - FCP - Bosch Motorsports - OZ Racing - SRM/SSAC exhaust - Tons of New OEM parts

  6. #6
    Established Member Two Rings sxC's Avatar
    Join Date
    Feb 12 2013
    AZ Member #
    109439
    My Garage
    2000 S4, 2012 S5
    Location
    Houston, TX

    Quote Originally Posted by christianb5s4 View Post
    I'm assuming you meant that you don't need access to it all the time. I mounted my AEM controller behind the little cover on the driver's side of the dash inside that open area behind the cover. Fits perfectly and makes wiring routing cleaner.
    What did you use for a bracket? I'm thinking of doing the same.

  7. #7
    Senior Member Four Rings christianb5s4's Avatar
    Join Date
    Aug 24 2014
    AZ Member #
    277489
    Location
    Newport Beach, CA
    Items for Sale

    No bracket, it just barely fits in there but it fits tight enough to where I didn't see a need to make any type of mount or bracket.
    Imola 2001 Stage 3 S4: 312K - 2.4sec FATs - Completely Refreshed/Built Motor - SRM K24s w/ Custom Turbosmart wastegates - Clutchmasters Stage 4 - Etspec - Cinesnow WG/Oil Lines - SRM V3 Intercoolers - AA built trans - 4:1 Diff - JHM Trio - 034 - H&R Coilovers - FCP - Bosch Motorsports - OZ Racing - SRM/SSAC exhaust - Tons of New OEM parts



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.