Audizine - An Automotive Enthusiast Community

Results 1 to 4 of 4
  1. #1
    Active Member Two Rings arankaspar1's Avatar
    Join Date
    Feb 20 2018
    AZ Member #
    414368
    Location
    Oakland CA

    Should I use additive cleaners to keep the FSI valves clean?

    Guest-only advertisement. Register or Log In now!
    Hey guys,
    I've heard that FSI valves get dirty over time and the only way to clean them is to pull them all out.

    I've currently got 94,000 miles and occasionally hit 18PSI with my K04.

    Wondering if anyone has had experience with regular proactive valve cleaning fuel additives and if so what do you recommended?

    Have also read here... something to the effect of the engine being designed to clean itself and there being a sweet-spot to engaging or optimizing this by holding rpm just above 3K for about 15min a week.

    I've used seafoam which only on my 25y/o integra because it was dirty and it did help me pass smog.

    Also don't know if they make special cleaner for fuel stratified engines.

    Any input is appreciated



    Sent from my iPhone using Audizine

  2. #2
    Established Member Four Rings wkhanna's Avatar
    Join Date
    May 12 2017
    AZ Member #
    399355
    My Garage
    needs cleaned
    Location
    Land of Archaic Anachronisms

    the fsi engine is direct fuel injection.
    iow, the fuel injector is in the combustion chamber, not up-stream in front of the intake valves.
    fuel additives will have V little, if any effect on the intake valves because fuel never goes past the intake valve.
    Bill

    Practicing Curmudgeon & Audio Snob

    2011 A5 2.0T Old Man Project
    2011 A4 quattro 2.0t (The Wife's)
    1983 Porsche 944 (Modified)
    1985 BWM K100RS (since new - Heavily Modified)
    1971 Moto Guzzi Elderodo
    Avatar Chart

  3. #3
    Active Member Two Rings arankaspar1's Avatar
    Join Date
    Feb 20 2018
    AZ Member #
    414368
    Location
    Oakland CA

    Quote Originally Posted by wkhanna View Post
    the fsi engine is direct fuel injection.
    iow, the fuel injector is in the combustion chamber, not up-stream in front of the intake valves.
    fuel additives will have V little, if any effect on the intake valves because fuel never goes past the intake valve.
    I'm mainly concerned about the carbon build up.


    Sent from my iPhone using Audizine

  4. #4
    Active Member One Ring socom458's Avatar
    Join Date
    Sep 16 2014
    AZ Member #
    283150
    Location
    Central Ohio, United States

    I think you misunderstood the response. Direct injection means the fuel is directly injected into the cylinder s, which means the fuel never passes over the intake valves. Therefore, any additive put in the fuel tank will never pass over the valves, and cannot remove carbon on the valves. Gas tank additive could, potentially help clean a clogged injector, this is debateable. Make sense?

    Sent from my Pixel XL using Audizine mobile app
    Central Ohio
    2010 Audi A5 2.0



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.