Audizine - An Automotive Enthusiast Community

Results 1 to 27 of 27
  1. #1
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    '02 A4 1.8TQM 5-speed

    Guest-only advertisement. Register or Log In now!
    2002, Dolphin Gray, 1.8T, 5-speed, Quattro, 190k miles.

    If you need something within a certain time frame just ask and I'll do my best to get the parts out in time. Most items I've added pictures to already. If you'd like something specific just let me know.

    Car is modded, parts to note are below, most anything else is stock.

    Please add paypal fee of 2.9%.

    ***If you buy the full turbo kit (tuned ECU for included parts, injectors, turbo, manifold, downpipe, FMIC kit, and BOV) I will package them for $1750 + shipping***


    Still available:

    - 034 adjustable front UCA
    Brand new rebuild kit installed/supplied. New bushings just pressed in. Heim joints, dust boots and hardware are all brand new as pictured.
    $350 shipped


    - 8E0 909 518 F, ECU, tuning was paired with the 20g turbo, TT225 MAF and EV14 injectors I am also selling. Catless and no SAI but, all monitors are still active so it will pass MA emissions. Immobilizer is still active.
    $200 shipped


    - EV14 725cc injectors
    $300 shipped

    - PSi Concepts 20G turbo
    Minimal shaft play, oil and coolant lines included as well as oil drain flange
    $400 + shipping


    - PSi Concepts T25 Exhaust manifold
    $250 + shipping

    - PSi Concepts Downpipe/test pipe
    $150 + shipping

    - FMIC kit
    Treadstone 1.8t Intercooler, mostly ER piping with custom front elbows to accomodate Treadstone intercooler, custom mounting bracket, ER power steering cooler, modified ER re-bar
    $500 + shipping

    - Forge 004 BOV
    Do not have spring kit, I believe it has the yellow spring inside, will update when I remove it
    $75 shipped

    - Rear wheel bearings/hub
    Hub reconditioned including bearing replacement and rubber bushings ~3k miles ago
    $100 + shipping

    - ECS tuning hubcentric wheel spacers, 10mm
    $40 shipped


    - O2 Sensors, front and rear
    $40/each shipped, $75 for the pair

    - S4 rear bumper
    OEM, paint cracked on right side and some scuffing in the middle, no dents or gouges though
    $250 + shipping

    - Earl's 10 row external oil cooler/lines/sandwich plate
    $70 shipped


    - Heated rear seat lower
    $75 + shipping

    - 42 draft designs catch can
    $75 shipped


    - Trunk with s4 replica lip
    $75, hoping for local pickup but will ship at buyer's expense

    - Coil packs
    06E 905 115 D
    $30 shipped


    - Xtrons head unit
    Android 6.0 version. Great head unit. Replaced an Alpine double din I had with this one. Includes antennas, wiring harness, bluetooth microphone. Glad to answer any questions as I know not many people have reviewed the unit.
    $150 shipped

    - Engine
    190k, could use a new valve cover gasket but otherwise ran great
    $200 local pick up only

    - Headlight switch, genuine 8E0 941 531 A 5PR
    $30 shipped


    - S4 rear brakes, includes rotors(RotorLab set ~1500 miles), pads(bosch quietcast ~1500 miles), carriers(powdercoated black), and calipers(powdercoated red). One caliper needs a new seal.
    $300 shipped



    Sold:
    - Front brakes
    - Seats
    - USP lower grill center
    - Suspension
    - S4 center grill
    - Snub mount
    - S4 mirrors
    - USP front bumper
    - RS4 sway bar
    - MAF
    - ESP button
    - Transmission
    - Podi gauge pod
    - 034 front sway bar end links
    Last edited by agart; 07-06-2018 at 04:34 PM.
    DG '02 A4 1.8TQM

    My Build Thread

  2. #2
    Established Member Two Rings
    Join Date
    Jan 09 2015
    AZ Member #
    308495
    My Garage
    02B6A4
    Location
    NY

    Is your exhaust stock?

  3. #3
    Veteran Member Four Rings fR3ZNO's Avatar
    Join Date
    Feb 09 2013
    AZ Member #
    109199
    Location
    CNY
    Items for Sale

    Pmd
    "If one does not fail at times, then one has not challenged himself." - Ferdinand Porsche

  4. #4
    Veteran Member Three Rings 1.8Turbo4me!'s Avatar
    Join Date
    Jun 10 2009
    AZ Member #
    43616
    Location
    S.F, CA --> Houston, TX

    pm'd you
    * GTRS Eliminator - 550cc Injectors - 034 HFC - Techtonics Tuning Downpipe - Neuspeed Exhaust - 034 TIP - Treadstone TR6 FMIC - Reisu Motorsports Custom Tune
    * H&R Sport Springs - Bilstein Sport Shocks - RS4 Rear Sway Bar - B7/B6 S4 Front & Rear Brakes
    * 18" VMR v710 (Currently On) & 18" OZ Ultraleggera

  5. #5
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Quote Originally Posted by a1rh3adSz View Post
    Is your exhaust stock?
    It's a magnaflow system that's been altered. Instead of being sleeved at the front end it has a v-band flange to connect to the downpipe. The tips have been changed as well.
    DG '02 A4 1.8TQM

    My Build Thread

  6. #6
    Active Member One Ring
    Join Date
    May 17 2015
    AZ Member #
    332944
    Location
    Florida

    Interested in the USP bumper. Pm me please with pics. Thanks.

  7. #7
    Senior Member Three Rings
    Join Date
    Aug 17 2015
    AZ Member #
    349506
    My Garage
    '64 VW Type 3 Notch, '66 Type 3 Fastback, '77 Rabbit 2.0L 16v w/ITBs, '84 944, '99 323i
    Location
    Evansville, IN

    PM sent!

  8. #8
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    PM's have been replied to. I am getting quotes tonight for shipping some of the larger items and will update the listing so people have a general idea of cost.
    DG '02 A4 1.8TQM

    My Build Thread

  9. #9
    Active Member One Ring
    Join Date
    May 15 2017
    AZ Member #
    399517
    My Garage
    2004 A4 Avant 1.8T 6spd, 2001 SAAB 9-3 Base, 1995 Volvo 850 GLT (RIP)
    Location
    Auburndale, MA

    PM'd about the S4 mirrors, just noticed you're local, too

    Sent from my Pixel XL using Tapatalk

  10. #10
    Registered Member One Ring
    Join Date
    May 23 2018
    AZ Member #
    419316
    Location
    Haverhill MA

    What condition are the door blades if they are available? Also, the windshield moldings? Do you have pictures of these items? Also, I'm local.

  11. #11
    Active Member One Ring Stock B6's Avatar
    Join Date
    May 25 2018
    AZ Member #
    419424
    Location
    Champlin, MN

    How much for the two front fenders? Assuming no rust or major dents?

  12. #12
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Quote Originally Posted by Mayan View Post
    What condition are the door blades if they are available? Also, the windshield moldings? Do you have pictures of these items? Also, I'm local.
    Quote Originally Posted by Stock B6 View Post
    How much for the two front fenders? Assuming no rust or major dents?
    PMs sent!
    DG '02 A4 1.8TQM

    My Build Thread

  13. #13
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Bump! Added a few things and moved the pictures to the main post.
    DG '02 A4 1.8TQM

    My Build Thread

  14. #14
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Bump. Added a couple more things and made a package deal for the turbo setup.
    DG '02 A4 1.8TQM

    My Build Thread

  15. #15
    Registered Member One Ring
    Join Date
    May 24 2018
    AZ Member #
    419351
    Location
    Detroit

    PM'd

  16. #16
    Established Member Two Rings TMeschke's Avatar
    Join Date
    Sep 20 2016
    AZ Member #
    381417
    My Garage
    2003 Audi A4 Quattro 1.8T 5MT
    Location
    Minneapolis, MN

    More info on the oil cooler? I didnt know anyone made an external oil cooler sandwich plate for the B6. Also might be interested in the S4 rear brakes.


    Sent from my iPhone using Audizine
    2003 Audi A4 1.8 Quattro 5MT - Brembo 17Z Front Calipers, 2.0 TFSI Coilpacks, 034 Test Pipe, B&B Sport Exhaust, VMR V701 ET35, H&R Sport Springs, Some Shitty ECU Tune

  17. #17
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    PMs and posts replied to.
    Last edited by agart; 06-08-2018 at 05:50 AM.
    DG '02 A4 1.8TQM

    My Build Thread

  18. #18
    Active Member One Ring
    Join Date
    Jun 02 2018
    AZ Member #
    419880
    Location
    DC

    Id be interested in the end links


    Sent from my iPhone using Tapatalk

  19. #19
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Quote Originally Posted by Quattrey View Post
    Id be interested in the end links


    Sent from my iPhone using Tapatalk
    PM sent!
    DG '02 A4 1.8TQM

    My Build Thread

  20. #20
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Bump!
    DG '02 A4 1.8TQM

    My Build Thread

  21. #21
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Bump, make me offers!

    Added a picture of the rebuilt 034 control arms.
    DG '02 A4 1.8TQM

    My Build Thread

  22. #22
    Established Member Two Rings B6N00b's Avatar
    Join Date
    May 10 2017
    AZ Member #
    399245
    Location
    Upstate NY

    Do you have the driver's side door wiring harness by chance?

  23. #23
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Quote Originally Posted by B6N00b View Post
    Do you have the driver's side door wiring harness by chance?
    Not really, it's been cut in a couple places for aftermarket speakers. If that's still of interest let me know!
    DG '02 A4 1.8TQM

    My Build Thread

  24. #24
    Established Member Two Rings B6N00b's Avatar
    Join Date
    May 10 2017
    AZ Member #
    399245
    Location
    Upstate NY

    Quote Originally Posted by agart View Post
    Not really, it's been cut in a couple places for aftermarket speakers. If that's still of interest let me know!
    How cut up? Because as it stands I've got broken wires where it goes from the car body to the door, and none of my windows work. What would need to be replaced, any pics?

  25. #25
    Veteran Member Three Rings agart's Avatar
    Join Date
    Mar 20 2008
    AZ Member #
    26654
    Location
    Belmont MA

    Quote Originally Posted by B6N00b View Post
    How cut up? Because as it stands I've got broken wires where it goes from the car body to the door, and none of my windows work. What would need to be replaced, any pics?
    Sent you a PM!
    DG '02 A4 1.8TQM

    My Build Thread

  26. #26
    Senior Member Four Rings james12lucy's Avatar
    Join Date
    Jul 04 2015
    AZ Member #
    340494
    My Garage
    North America's only B7 Chump Car. 2006 2.0T A4, fully gutted, custom Loose Stones Racing Roll Cage,
    Location
    Toronto Ontario

    '02 A4 1.8TQM 5-speed

    How are you?

    Im interested in the oil cooler.

    Also, might be interested in the Xtrons unit. Is it the RNSE style?

    Thanks.


    Sent from my iPhone using Tapatalk
    Last edited by james12lucy; 07-16-2018 at 05:35 AM.
    B7 Avant, 6MT, Quattro - Brilliant Black: JHM 93 Octane Stage 2 tune, APR HPFP, S3 Injectors, JHM Test Pipe, Stasis Catback, R8 coils, 034 TIP, Custom CIA, 18" VMR 710, Podi Digital Boost Gauge, RS4 rear sway bar, RS4 grill, Eurojet Billet VC, 42DD catch can, Ohlins SL Coilovers w/ Hyperco springs, OEM Bi-Xenon retrofit, GFB DV+, Brembo 18z.

  27. #27
    Senior Member Two Rings
    Join Date
    Nov 02 2013
    AZ Member #
    128137
    My Garage
    01.5 S4 Avant 6MT, 02 A4 1.8 5MT, 04 A4 3.0 6MT, 08 Mustang GT, 03 Forester
    Location
    Maryland
    Items for Sale

    PM'd
    LDRXN



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.