Audizine - An Automotive Enthusiast Community

Results 1 to 8 of 8
  1. 04-22-2018 05:39 PM #1
    batman2.7
    batman2.7 is offline
    Senior Member Two Rings batman2.7's Avatar
    Join Date
    Apr 22 2014
    AZ Member #
    191926
    Location
    Delaware

    front bearing help asap!

    Guest-only advertisement. Register or Log In now!
    ran into trouble replacing my axles...noticed the bearing was completely shot....so I went to advanced and they sold.me a bearing and hub assembly but come to find out there is not a hub and bearing assembly to unbolt to bolt what advanced sold me....so what is it exactly I need? I have a 2.7 manual pre-facelift....do I just buy a bearing by itself?
    Reply With Quote Reply With Quote  
  2. 04-22-2018 05:40 PM #2
    kRussia
    kRussia is offline
    Senior Member Three Rings kRussia's Avatar
    Join Date
    Sep 04 2014
    AZ Member #
    280283

    Bearing by it self needs to be pressed in on the hub. Most shops will do that for you for a small fee if you take your hub assembly to them.
    Reply With Quote Reply With Quote  
  3. 04-22-2018 05:51 PM #3
    batman2.7
    batman2.7 is offline
    Senior Member Two Rings batman2.7's Avatar
    Join Date
    Apr 22 2014
    AZ Member #
    191926
    Location
    Delaware

    could you help with a link to a proper bearing? please and thanks
    Reply With Quote Reply With Quote  
  4. 04-22-2018 06:03 PM #4
    batman2.7
    batman2.7 is offline
    Senior Member Two Rings batman2.7's Avatar
    Join Date
    Apr 22 2014
    AZ Member #
    191926
    Location
    Delaware

    https://m.eeuroparts.com/Parts/79467...saAvZzEALw_wcB

    after pulling it apart and getting the old bearing out...it looks like this is the direct replacement...but this says that it isn't for a 2000 a6...it says for late 90's 2.8 models and for 2001 and up 2.7 allroad models...but not mine....I'm so confused why do they say these bolt in hub and bearing assemblies fit my car when theyou actually dont??
    Reply With Quote Reply With Quote  
  5. 04-22-2018 07:44 PM #5
    02 A6 2.7T
    02 A6 2.7T is online now
    Veteran Member Four Rings 02 A6 2.7T's Avatar
    Join Date
    Nov 19 2006
    AZ Member #
    13513
    My Garage
    Too much crap
    Location
    WA

    Quote Originally Posted by batman2.7 View Post
    https://m.eeuroparts.com/Parts/79467...saAvZzEALw_wcB

    after pulling it apart and getting the old bearing out...it looks like this is the direct replacement...but this says that it isn't for a 2000 a6...it says for late 90's 2.8 models and for 2001 and up 2.7 allroad models...but not mine....I'm so confused why do they say these bolt in hub and bearing assemblies fit my car when theyou actually dont??
    That looks like the right one for the steel uprights on a pre-facelift. The new bearing needs to be pressed into the upright, then the hub into the new bearing ...

    2002 A6 2.7T - 6MT Crystal Blue APR Stage 1
    2002 S6 - 6 MT Black/black
    **SOLD ** 2002 allroad 2.7T 6MT
    Reply With Quote Reply With Quote  
  6. 04-23-2018 04:11 AM #6
    batman2.7
    batman2.7 is offline
    Senior Member Two Rings batman2.7's Avatar
    Join Date
    Apr 22 2014
    AZ Member #
    191926
    Location
    Delaware

    ohhhhhh shit...ok so the bolt in hub and bearing they sold me is for the aluminum uprights I suppose then huh?
    Reply With Quote Reply With Quote  
  7. 04-23-2018 04:15 AM #7
    batman2.7
    batman2.7 is offline
    Senior Member Two Rings batman2.7's Avatar
    Join Date
    Apr 22 2014
    AZ Member #
    191926
    Location
    Delaware

    is there a better set to go with? any that would be considered an upgrade before I order a set? going to order around noon today so I'll check back before then
    Reply With Quote Reply With Quote  
  8. 04-23-2018 05:15 AM #8
    02 A6 2.7T
    02 A6 2.7T is online now
    Veteran Member Four Rings 02 A6 2.7T's Avatar
    Join Date
    Nov 19 2006
    AZ Member #
    13513
    My Garage
    Too much crap
    Location
    WA

    Quote Originally Posted by batman2.7 View Post
    is there a better set to go with? any that would be considered an upgrade before I order a set? going to order around noon today so I'll check back before then
    No, that set (https://www.eeuroparts.com/Parts/794...ont-105K10013/) looks OK for the application ... price is about average as well
    2002 A6 2.7T - 6MT Crystal Blue APR Stage 1
    2002 S6 - 6 MT Black/black
    **SOLD ** 2002 allroad 2.7T 6MT
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.