Stage 2 S6 power figures

[Barritia]

What kind of engine and wheel TQ and HP are stage 2 cars on 93 putting out?

[wwhan]

What kind of engine and wheel TQ and HP are stage 2 cars on 93 putting out?

https://www.goapr.com/products/ecu_u...tfsi_s6s7.html

https://www.goapr.com/products/apr_e...npipe_40t.html

"Stock As Reported by Audi 91 AKI 95 RON 420 HP 406 FT-LBS
Stock As Measured by APR 93 AKI 98 RON 480 HP 451 FT-LBS

APR Stage I 91 AKI 95 RON 553 HP 588 FT-LBS +108 HP @ 3,850 RPM +155 FT-LBS @ 3,500 RPM
APR Stage I 93 AKI 98 RON 563 HP 627 FT-LBS +125 HP @ 3,800 RPM +187 FT-LBS @ 3,250 RPM
APR Stage I 100 AKI 104 RON 578 HP 635 FT-LBS +138 HP @ 3,850 RPM +198 FT-LBS @ 3,350 RPM
APR Stage II 91 AKI 95 RON 575 HP 669 FT-LBS +164 HP @ 3,850 RPM +236 FT-LBS @ 3,450 RPM
APR Stage II 93 AKI 98 RON 586 HP 694 FT-LBS +176 HP @ 3,850 RPM +258 FT-LBS @ 3,350 RPM
APR Stage II 100 AKI 104 RON 602 HP 713 FT-LBS +196 HP @ 3,950 RPM +280 FT-LBS @ 3,450 RPM
APR Stage II 104 AKI 108 RON 614 HP 717 FT-LBS +207 HP @ 4,100 RPM +284 FT-LBS @ 3,550 RPM"

[Barritia]

Thanks Wwhan. Are their numbers to the wheels or is that engine.

[pez81]

Is it really 700tq on stage 2? I measured 407flbs stock and 594lbs stage 1 on 93. I've got stage 2 now on stock downpipes and made about 20hp and 30lbs mid range more. I struggle to believe I'm going to make another 40-50lbs with hardware. Be nice but I doubt it.

Sent from my Pixel 2 XL using Tapatalk

[Barritia]

I noticed a difference in TQ when I put my downpipes on. I already had the stage 2 on so had a good idea of how the car felt before they were installed. No idea how much more but def a difference.

[pez81]

Good to hear. It's pretty noticeable then?

Sent from my Pixel 2 XL using Tapatalk

[Barritia]

Throttle response felt better, TQ was def increased over not having them and of course they sound awesome

[pez81]

Throttle response felt better, TQ was def increased over not having them and of course they sound awesome

Thanks bro.

Sent from my Pixel 2 XL using Tapatalk

[sickmade0331]

I made 546awhp 716tq on 93 on 100 I made 586awhp 722tq on a mustang dyno.

Sent from my SM-G965U using Audizine mobile app

[Barritia]

What would that end up being at engine HP and TQ? They are good numbers to the wheels for 93.

[sickmade0331]

Well 15-20% more

Sent from my SM-G965U using Audizine mobile app

[sickmade0331]

Around 650-670

Sent from my SM-G965U using Audizine mobile app

[pez81]

Really? What was your baseline as the delta is what matters. Every UK dyno i have seen is no where near that. Unless your US tune is stronger? It's normally 185ftlbs stage 1 over stock and about 70-80 WHP over stock on stage 1. Could it be your WHP is your crank figure? If not you must be running 10s

[sickmade0331]

I didn't do a base line. my numbers are at the wheels iv never dragged the car so I dunno. But I know traction is a very big issue on the street.

Sent from my SM-G965U using Audizine mobile app

[goliath1]

https://www.goapr.com/products/ecu_u...i_c75s6s7.html

[dmax/04v]

With a little more time on the books for these cars, how are they holding up to the added power? Anyone running into any big motor or trans issues?

[Cam.CL.S7]

im getting baseline dyno numbers at the end of the month, will report back. i only have an S-Flow Intake and front resonators deleted.

[S4Per]

Mustang Dyno. Stock and Stage 2.