What have you done to your B9 S4 today?

**FromS60toB61.8t** · 08-19-2022 05:36 AM

Originally Posted by SHCKR

Added direct TPMS

Is there a DIY for this somewhere? Would love to have this.
Also, how do you get the speed limit showing on the dash??

**SHCKR** · 08-19-2022 05:23 PM

Originally Posted by FromS60toB61.8t

Is there a DIY for this somewhere? Would love to have this.
Also, how do you get the speed limit showing on the dash??

Yes, there's a DIY on Audiworld, and cross posted here in the S5 forum.
Speed signs are read by the cameras, then displayed on the dash as part of the driver assistance package, not sure if it's prestige only, maybe others can chime in. (I know it's not GPS driven as it adjusts to temporary speed limits in construction zones.)

**PtPixel** · 08-21-2022 04:50 PM

It got a bit delayed but it's on the truck this morning, should have delivery in 3-5 days.

Ordered RS6 metal paddle shifters and an RS style grille. Considering dynamic indicators too.
Homelink isn't offered in NZ, so wondering if it's worth trying to get that retrofitted and set up as it'd be really nice to have the buttons there. Need to do some research into if it's possible.

**Longtallsally** · 08-21-2022 09:22 PM

Originally Posted by SHCKR

Added direct TPMS

I may hit you up when I’m due for tires as I’ve wanted this for some time. I’ve read the reviews and watched the videos, but how was the install?

**byront8** · 08-25-2022 03:20 PM

Originally Posted by PtPixel

It got a bit delayed but it's on the truck this morning, should have delivery in 3-5 days.

Ordered RS6 metal paddle shifters and an RS style grille. Considering dynamic indicators too.
Homelink isn't offered in NZ, so wondering if it's worth trying to get that retrofitted and set up as it'd be really nice to have the buttons there. Need to do some research into if it's possible.

Homelink is defo retrofittable in NZ, I've done the exact same setup in mine. You need the controls from a suitable overhead dash light, the sensor, and the cable set from kufatec.

Also fitted the RS6 paddles, and black optics grille last week, the paddles are really nice on the hands!

**PtPixel** · 08-26-2022 12:49 AM

Originally Posted by byront8

Homelink is defo retrofittable in NZ, I've done the exact same setup in mine. You need the controls from a suitable overhead dash light, the sensor, and the cable set from kufatec.

Great to hear, will definitely want to get that installed then.

Got my hands on it! Also ordered aa wireless and seeing if the local dealership is willing to update the MMI to fix the overview vs graphic bug

**CookieHas** · 08-28-2022 11:59 AM

Originally Posted by flee

Took her to the caffeine and octane this morning.

Sent from my iPhone using Tapatalk

What wheels and specs?

Sent from my SM-N975U1 using Audizine Forum mobile app

**Mops@Nemesis** · 08-28-2022 05:19 PM

Originally Posted by CookieHas

What wheels and specs?

Sent from my SM-N975U1 using Audizine Forum mobile app

MOMO RF wheels in 19x9.5 ET35 on 265 with a small front spacer for caliper clearance.

**RatBustard** · 08-28-2022 06:12 PM

Originally Posted by turbo4dr

Blacked out reflectors

maybe get them paint matched - would look much better.

**CookieHas** · 08-30-2022 03:08 AM

Originally Posted by Mops@Nemesis

MOMO RF wheels in 19x9.5 ET35 on 265 with a small front spacer for caliper clearance.

Thanks mops.

Sent from my SM-N975U1 using Audizine Forum mobile app

**Mops@Nemesis** · 09-03-2022 05:07 PM

Fresh Carbnlab lip arrived -

Mops on the Move

**Speedster00** · 09-06-2022 09:54 AM

Originally Posted by seanm135

Attachment 274570
Attachment 274571
Installed the 034 rear sway bar, EMD springs, and 12.5 EMD spacers. Loving the setup thus far… more planted, 1” drop, but not too harsh.

034 tune is ordered (on the way) and tints up next.

Sent from my iPhone using Audizine Forum

How difficult were the springs to install? I'm about to do mine. Any tips?

**Itsmys4** · 09-09-2022 03:57 PM

Hello my fellow Audi lovers what i did this past weekend was get rid of that terrible rocker arm failure point that these specific engines have, wasn't easy and took me about two days to do. ill show the rocker arm that gave out

this is the image of both new and old rocker arms. This next image is the failure rocker arm next to the other old rocker arm

if you guys have any question lmk. im honestly happy i got this done before i just wanted to get rid of the car. my S4 runs so much smoother and regained the factory HP i have to say plus that terrible ticking sound is completely gone :-)

**browncow** · 09-09-2022 11:08 PM

I did this today. First time on dyno.

numbers at the wheel. Hot day, inlet temps were 98 degrees.

**seanm135** · 09-10-2022 05:04 AM

Originally Posted by Speedster00

How difficult were the springs to install? I'm about to do mine. Any tips?

Not bad at all… Rears we’re actually real easy and only required removing two bolts (lower strut and inner control arm).

Fronts are just like most other Audis… only snag I ran into was the damn pinch bolt on one side so I removed the bolt at the upper end.

Remember to tighten everything at ride height!

Sent from my iPhone using Audizine Forum

**SHCKR** · 09-10-2022 07:15 AM

Originally Posted by Itsmys4

Hello my fellow Audi lovers what i did this past weekend was get rid of that terrible rocker arm failure point that these specific engines have, wasn't easy and took me about two days to do. ill show the rocker arm that gave out

this is the image of both new and old rocker arms. This next image is the failure rocker arm next to the other old rocker arm

if you guys have any question lmk. im honestly happy i got this done before i just wanted to get rid of the car. my S4 runs so much smoother and regained the factory HP i have to say plus that terrible ticking sound is completely gone :-)

Care to post a DIY guide?

**flee** · 09-10-2022 08:06 AM

Just a vent on bad experience lol
Swapping in bigger injectors this morning and …
Not sure what the deal is with these apr coils but i loaded with dielectric grease in and out and they still stick.
Not sure why I swapped to begin with as the OEM coils were fine.
Oh and they don’t stick to the plugs like these do. Just sayin

Sent from my iPhone using Tapatalk

**SHCKR** · 09-10-2022 11:23 AM

Originally Posted by flee

Just a vent on bad experience lol
Swapping in bigger injectors this morning and …
Not sure what the deal is with these apr coils but i loaded with dielectric grease in and out and they still stick.
Not sure why I swapped to begin with as the OEM coils were fine.
Oh and they don’t stick to the plugs like these do. Just sayin

Sent from my iPhone using Tapatalk

I learned that lesson with my GTI... Did you do it with the engine cold?

**flee** · 09-10-2022 02:07 PM

Hmmm shoot I can’t remember, I would say I did as I did plugs the same time I think.
One of those just about stuck in the wall when I threw it lol
Injectors in and tuning now with IE

Sent from my iPhone using Tapatalk

**SHCKR** · 09-10-2022 05:11 PM

Originally Posted by flee

Hmmm shoot I can’t remember, I would say I did as I did plugs the same time I think.
One of those just about stuck in the wall when I threw it lol
Injectors in and tuning now with IE

Sent from my iPhone using Tapatalk

When cold, (on the GTI), I couldn't pull the boots off with pliers. Warmed up the engine for about a minute, and they came right off.

**byront8** · 09-11-2022 03:17 PM

Started some little upgrades:
RS4 handles
IMG_6327.JPG

Leather armrests
IMG_6328.JPG

RS4 spoiler off for paint!
IMG_6329.JPG IMG_6330.JPG

Sent from my iPhone using Audizine

**Itsmys4** · 09-24-2022 02:27 PM

absolutely boss, im trying to get that done now. i didn't end up getting to much DIY myself while working on my S4 but that's why I'm trying to help others out and get their S4 running better than brand new you know what i mean brother while documenting it

**Sebastian Tu** · 09-25-2022 09:01 PM

Installed TE37's and KW V3 Coilovers, replacing Variant Radons and a KW HAS Kit
Not sure why pictures aren't showing up but it's A+ fitment :)

**Wobblenuts** · 09-26-2022 07:24 AM

Originally Posted by Sebastian Tu

Installed TE37's and KW V3 Coilovers, replacing Variant Radons and a KW HAS Kit
Not sure why pictures aren't showing up but it's A+ fitment :)

Ayyyy

**Mops@Nemesis** · 09-26-2022 09:44 AM

Got you Seb

Mops on the Move

**Sebastian Tu** · 09-26-2022 02:26 PM

Haha sweet thanks Mops
Also thanks Wobblenuts for such a great setup and making it fast and easy!

**thereef** · 09-26-2022 08:06 PM

Originally Posted by Sebastian Tu

Haha sweet thanks Mops
Also thanks Wobblenuts for such a great setup and making it fast and easy!

Glad you scooped up those TEs so I didn't have to.

**Sebastian Tu** · 09-26-2022 08:28 PM

I know, I wish he didn't tell me they were for sale... I was practically forced to at that point
Gamechanger for the car, feels like 2.0 now

**Wobblenuts** · 09-27-2022 08:07 AM

Originally Posted by thereef

Glad you scooped up those TEs so I didn't have to.

- - - Updated - - -

Originally Posted by Sebastian Tu

I know, I wish he didn't tell me they were for sale... I was practically forced to at that point
Gamechanger for the car, feels like 2.0 now

I feel like there wasn't much convincing yourself haha

**bwickmans4** · 09-27-2022 04:39 PM

Lets be real , 19s and meats are the Jam. 265 hits different.

**Mops@Nemesis** · 09-27-2022 04:42 PM

Originally Posted by bwickmans4

Lets be real , 19s and meats are the Jam. 265 hits different.

You know it!

😎

**brandonbanana** · 09-28-2022 03:48 PM

Originally Posted by Mops@Nemesis

Got you Seb

Mops on the Move

Oh my.. That is absolutely BEAUTIFUL!

**Sebastian Tu** · 09-28-2022 10:40 PM

- - - Updated - - -

Thanks man I'm loving it a ton!

By the way, is anybody else running a KW V3 Coilover setup?

**sgt_cr** · 10-02-2022 02:18 AM

Originally Posted by SHCKR

Added direct TPMS

i wonder why i dont have this indicator on my dash.... i only see an alert if the pressure went down but it doesnt tell specifically

**sgt_cr** · 10-02-2022 02:21 AM

Wrap on the car, paint the emblems on black and yellow, breaks on yellow, stage 1 with IE
_DSC0168~3.jpg DSC_4763~2.jpg

**PtPixel** · 10-02-2022 12:54 PM

Originally Posted by sgt_cr

i wonder why i dont have this indicator on my dash.... i only see an alert if the pressure went down but it doesnt tell specifically

I believe only the RS models come with it as stock. S4 has ABS-type sensor only. To retrofit you need the receiver, 4 x sensors in each wheel and a few coding changes.

**TaroBaapG35** · 10-06-2022 08:34 AM

Bittersweet day today (last 2 days technically)...B9 is gone, and I've moved over to the dark side with a new beeasht..I've taken the @BrockDM path!

Demodded & final at Home Pics:

- Couldn't take AWE Track Exhaust or ABT HAS off..so nice freebies for new owner :)

Last fillup before destination

Final Pic before hand off..Clearly I don't wanna let the S4 go and wifey wants the X3MC..

NEW BEEASHHTTTTT:

Love the new car...MPG is a JOKEEEE!!! S4 in comfort got me 33.4mpg over the 240mi drive with Traffic. X3MC averaged low ~24 over same trip in comfort and no traffic. LOL But that power is INSANEEEEE and the tech is best of Tesla + best of my 18 S4 Combined...

@Mops be ready for goodie requests!

I'll have a FS ad up shortly with mods that i took off...Wagner IC (<5kmiles), Roc Euro Intake + Hose (40kmi) and Bronze Volk TEs (I believe the first set that Mops got)