What have you done to your B9 S4 today?

[B9S4]

Just purchased a set of KW V3s through Mops on a Black Friday deal that were just released to the US yesterday! Can't wait to lose that last inch of fender gap :) hit up Mops to get the just released KW V3s for the B9 S4. I'll post some pics once I get them installed with the car a bit lower.

DSC_0156.jpg

[Mops@Nemesis]

Just purchased a set of KW V3s through Mops on a Black Friday deal that were just released to the US yesterday! Can't wait to lose that last inch of fender gap :) hit up Mops to get the just released KW V3s for the B9 S4. I'll post some pics once I get them installed with the car a bit lower.

DSC_0156.jpg

I was actually a little bit mad at you as I was writing up that invoice, lol. You're going to be so happy, Mason!

[King James]

Just purchased a set of KW V3s through Mops on a Black Friday deal that were just released to the US yesterday! Can't wait to lose that last inch of fender gap :) hit up Mops to get the just released KW V3s for the B9 S4. I'll post some pics once I get them installed with the car a bit lower.

Damn looks great!

I've just ordered a set of KW V3's and a set of BC Forged. I got the advice that as mine was built in early 18 without Electronic Damping Control that I should go with the 50mm diameter V3's, is that what you went with? Does your setup rub at all with 10's and 265?

[YOTAXI]

Looks Great with that color

[B9S4]

Damn looks great!

I've just ordered a set of KW V3's and a set of BC Forged. I got the advice that as mine was built in early 18 without Electronic Damping Control that I should go with the 50mm diameter V3's, is that what you went with? Does your setup rub at all with 10's and 265?

Thanks! I don't rub with a +38 offset and 265s. Lower offset would rub and higher would hit the control arm on the inside.

Sent from my SM-G965U1 using Audizine mobile app

[B9S4]

Got these in today. Thank you Mops they got here quick!20181212_165415.jpeg

Sent from my SM-G965U1 using Audizine mobile app

[Mops@Nemesis]

Got these in today. Thank you Mops they got here quick!

Sent from my SM-G965U1 using Audizine mobile app

Awesome Mason! I look forward to hearing your thoughts. So proper.

[Yabi]

MMI update to fix 360 camera. It worked!

[Yabi]

Took advantage of the nice day today and gave her a full detail.

[Mops@Nemesis]

Just an FYI guys - The AWE AirGates are available for order again, and the lead is only two weeks. 👍🏼

[ENV²]

MMI update to fix 360 camera. It worked!

There is a 360 camera

Sent from a misfiring cylinder

[B9S4]

Got the V3s installed and they ride so smooth! Also got the wmi kit in the mail :) Snapchat-234360430.jpeg20181218_171245.jpeg

Sent from my SM-G965U1 using Audizine mobile app

[Mops@Nemesis]

Glad to hear you're pleased Mason!

[vdubtx]

Mine is at dealer this morning for it's 10k service. Also mentioned to them about the TSB for the 360 camera, service advisor actually knew what I was talking about. LOL!! In the past, they never know about TSB's I have brought to their attention and I have to look up the number for them.

[Yabi]

Installed the AWE AirGate Carbon Intake (review) followed up with a complete interior and exterior detail.

[biador619]

6435475F-C6FC-4F8C-9F7B-069946C08208.jpg

Tinted my side markers finally!


Sent from my iPhone using Audizine

[Akoby9]

^What did you use to tint them? Looks good!

Also, probably a silly question but what type of rims do you have? The car looks sharp


Sent from my iPhone using Audizine

[biador619]

^What did you use to tint them? Looks good!

Also, probably a silly question but what type of rims do you have? The car looks sharp


Sent from my iPhone using Audizine

Thanks bro. I used 50% vinyl tint that I got from amazon. I cut a piece twice the reflectors size, removed the backing (save the backing), stuck the vinyl on the reflector, used a plastic tool to crease the outline, then removed the vinyl, placed they vinyl on the saved backing, used scissors to cut the crease lines, removed the backing again and finally carefully placed it on the reflector again. I did it this way because I didn’t want to cut into my paint with a razor.

The rims are 19” stock


Sent from my iPhone using Audizine

[Yabi]

Thanks bro. I used 50% vinyl tint that I got from amazon. I cut a piece twice the reflectors size, removed the backing (save the backing), stuck the vinyl on the reflector, used a plastic tool to crease the outline, then removed the vinyl, placed they vinyl on the saved backing, used scissors to cut the crease lines, removed the backing again and finally carefully placed it on the reflector again. I did it this way because I didn’t want to cut into my paint with a razor.

The rims are 19” stock


Sent from my iPhone using Audizine

Turned out great!

FYI for others, ECS has pre-cut smoked vinyl overlays if your not up to the DIY task that biador pulled off!

[Nox05]

Installed 034 Motorsport transmission mount insert and replaced my eBay S4 badge with OEM one's. I haven't had time to give a proper test drive yet and seeing the differences in shifting but I barley noticed the auto stop/start and I usually turn that off as soon as I get in the car. Waiting for a few more 034 goodies that should be arriving this week.



Sent from my Pixel 2 XL using Tapatalk

[Mops@Nemesis]

Just an FYI guys - The AirGates are officially back in stock, and shipping out from AWE starting today.

[Yabi]

Added some new shoes, BC Forged MonoBlock RS31 Series Rims. Complete write up here.

[DMan918]

She got a new face today Attachment 87802Attachment 87803

Sent from my SM-N950W using Audizine mobile app

Looks great. What's involved for install?

[will13k7]

you're going to hate me for saying this, but the s4 logo looks a little off, like its angled at 5 degrees.

[Nox05]

you're going to hate me for saying this, but the s4 logo looks a little off, like its angled at 5 degrees.

Yea, at that point it wasn't really "on". It was just for picture purposes.

Sent from my Pixel 2 XL using Tapatalk

[EthanZ]

I use Rim Wax by Smartwax for the wheels, Zaino for everything else. Smartwax helps reduce dust collection but it cannot stop it. It does help with cleaning the wheels though. Much easier to do with the wax than without.

Hi yabi may i know the rim model?

Sent from my Pixel 2 XL using Audizine mobile app

[Yabi]

Hi yabi may i know the rim model?

Hi EthanZ. They are the Audi Sport® 19" 5-spoke V design, contrasting Gray with a partially polished finish. I believe the OEM part number is 8W0601025BF

Hope this helps!

[EthanZ]

Hi EthanZ. They are the Audi Sport 19" 5-spoke V design, contrasting Gray with a partially polished finish. I believe the OEM part number is 8W0601025BF

Hope this helps!

Thank you very much Yabi! Cheers.

Sent from my Pixel 2 XL using Audizine mobile app

[Yabi]

Thank you very much Yabi! Cheers.

Sent from my Pixel 2 XL using Audizine mobile app

Anytime! I really liked those OEM wheels and hopefully you will too if you go with them. I ended up swapping them for a set of BC Forged RS31's with a custom finish.

[Audi_Salesman]

Upgrade my Carbon Audi Sport license plate frame to the latest and greatest!!!!


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

That's niiiiiiiiice!

[apadamsey]

Looks great. What's involved for install?

Hey! EMD auto has an installation video on their website. I just followed that. It wasn't too hard.

Sent from my LYA-L0C using Audizine mobile app

[Yabi]

Hey! EMD auto has an installation video on their website. I just followed that. It wasn't too hard.

Sent from my LYA-L0C using Audizine mobile app

How was the camera mount? I've heard that sometimes it's been an issue getting the camera to line up and/or mounted properly with the RS-style grills. Would love to hear your feedback on this.

[apadamsey]

How was the camera mount? I've heard that sometimes it's been an issue getting the camera to line up and/or mounted properly with the RS-style grills. Would love to hear your feedback on this.

Hey Yabi, you're absolutely correct. That's the only issue I have with this grille. The front camera does point a tad bit upwards. It bugged me at first, but I've gotten used to it. But to be fair, I rarely use the front camera.

If anyone does have a fix for this, I would love to hear it!

Sent from my LYA-L0C using Audizine mobile app

[Diokhan]

Are you able to shim the mounting location to level it?

[Yabi]

Hey Yabi, you're absolutely correct. That's the only issue I have with this grille. The front camera does point a tad bit upwards. It bugged me at first, but I've gotten used to it. But to be fair, I rarely use the front camera.

If anyone does have a fix for this, I would love to hear it!

Sent from my LYA-L0C using Audizine mobile app

Thanks for your feedback. I do use the front camera all the time which holds me back from this mod. I’d be curious if anyone ever tried to source the OEM RS4 grill from Audi Germany/EU and if it fits in properly with all the mounts where they need to be.

If you figure the camera out with the EMD grill please share!

[TaroBaapG35]

Hey Yabi, you're absolutely correct. That's the only issue I have with this grille. The front camera does point a tad bit upwards. It bugged me at first, but I've gotten used to it. But to be fair, I rarely use the front camera.

If anyone does have a fix for this, I would love to hear it!

Sent from my LYA-L0C using Audizine mobile app

Maybe the old one can be removed and a 3d printed one can be installed instead? If you send me specs I can try and mock something up and there are places where you can send said specs and they'll print in any metal you want.



Sent from my SM-N950U using Audizine mobile app

[Paintedblack]

Hey! EMD auto has an installation video on their website. I just followed that. It wasn't too hard.

Sent from my LYA-L0C using Audizine mobile app

Any chance its possible to do the install without removing the wheels? Like just turning them to the side or something? I've had my RS grile for a couple weeks but been too lazy....

[NC_Detail_Garage]

Just an FYI guys - The AirGates are officially back in stock, and shipping out from AWE starting today.

I do feel a little extra power from the intake

*source - trusty butt dyno

[Mops@Nemesis]

I do feel a little extra power from the intake

*source - trusty butt dyno

Ha!! Butt you have calibrated that dyno lately?

After pulling my pipes, intake and wheels, my S4 feels completely different. I am however enjoying the P Zeros in cold temps. The tail is extremely happy. 😳