Lowering issue?

[Barritia]

Ok so I have a odd issue. I installed the DSG tune and cleared the DTC’s with VCDS. I have lowering links installed and some how my suspension in dynamic is now back to stock heights.

Now this is where I’m confused. Is there an easy way to get my car back to its original lowered settings without putting the old links back on then restoring old values then putting lowering links back on.

I guess what has happened is when I cleared the DTC’s it took my adjusted height links and accepted them as the stock height links so now everything seems stock to the cars system. I have the original figured for the factory settings but is this going to help me!

This got me confused.

[OlyS6]

You can simply see which numbers are stored for height at each of the 4 corners of the car in VCDS. I've had to go in and reset everything to the original stock numbers, and then re-enter the desired lowering by adding 17mm to each of the numbers and recalibrating.
Another option would be to pick up a cete lowering module V2 when you have a chance, so that you can adjust the height of the car easily whenever you want.

[Barritia]

The cete module would be nice. I fixed the issue though.

I had the vehicle in raise mode when I cleared the DTC’s. I put it in auto and lowered from raised cleared them again and the car seems to be back at normal height for now.