Original Audi Carbon Mirror Covers compared to Aluminum and Black Optics

[audibmi]

We never got the option to order carbon mirror covers, although it was an option in the UK for £1,250 GBP! I picked up a set in Germany last fall, but a recent check indicates that the part number is now available stateside for $780 MSRP or ~$638 online, which is much cheaper than what I paid.

The part number is 8S0 072 530 A 3Q0 for a set of left and right covers. I hope this helps those that want the carbon mirror option.

If anyone wants a set of brushed aluminum ones, check the classifieds (I got this set to learn how to install my carbon covers) https://www.audizine.com/forum/showt...g-heated-glass

For install instructions, read my handy write up here: https://www.audizine.com/forum/showt...1#post12854106


UK Option £1,250 GBP




The OEM carbon covers are actually full carbon, not laid over a plastic shell, so there is actually a bit of weight savings. I've had mine since last September and no hint of yellowing in the clear coat. The carbon weave is also a perfect match with the interior carbon in my TTRS.


Full Carbon Covers at 81 grams:


Black Optics Gloss Black at 99 grams:


Alu Optic Brushed Aluminum at 136 grams:


Part number for carbon covers:


Full carbon shells:


Installed:

[timzcat]

Everytime you post it cost someone money.

I am resisting the urge because I don't plan on keeping the car long-term, R8 itch too strong

[audibmi]

Everytime you post it cost someone money.

I am resisting the urge because I don't plan on keeping the car long-term, R8 itch too strong

The latest gen R8 uses the same mirror as the MK3 TT

[arnemeyer]

The latest gen R8 uses the same mirror as the MK3 TT

Alright so I ordered the caps - thanks for the part number so super helpful! The insert in the box of warnings even had a TT pictured. Not sure if that’s just a standard line drawing.

Anyhow, looking at your instructions to replace the caps - any issues to watch out for?

The two questions that spring to mind is:
Did you have to remove the entire mirror assembly off the door just to swap?
Did you have any warning lights or anything afterwards?

[audibmi]

Removal off the door not required.
If you have folding mirrors and rotated them during install, return them to original position before starting car.

I used painters tape when removing glass to avoid scuffing plastic housing. Protective eyewear and gloves always a good idea when working with glass.

[arnemeyer]

Removal off the door not required.
If you have folding mirrors and rotated them during install, return them to original position before starting car.

I used painters tape when removing glass to avoid scuffing plastic housing. Protective eyewear and gloves always a good idea when working with glass.

Thanks so much for the help! That all makes sense. Really appreciate the install instructions too.

[BeTTo RS]

Amazing information! Looking forward to buy a set of these carbon fibre side mirror covers!

[BeTTo RS]

Thanks, just ordered my carbon fibre rearview mirror covers! Once they arrive I’ll use your “Install Guide” for sure! Thanks again!

[BeTTo RS]

Is it the same part number if my car has Lane Assist?