Audizine - An Automotive Enthusiast Community

Page 12 of 13 FirstFirst ... 210111213 LastLast
Results 441 to 480 of 483
  1. #441
    Veteran Member Four Rings tar's Avatar
    Join Date
    Jul 07 2009
    AZ Member #
    44682
    My Garage
    B8 S4, Orange B5 Avant
    Location
    Socal/IE

    Guest-only advertisement. Register or Log In now!
    Ignore.


    Sent from my LM-G710VM using Tapatalk
    Last edited by tar; 06-27-2018 at 09:29 AM.
    2011 S4 6mt Black/ Magma/ Carbon
    HRE ff01 | Rotiform ind-t | AWE Touring | P3 | Roc Euro | PLM | Eurocode Sways | Apr Stage 2 | H&R Sport | Q5 ECS Wave F/R | CR15 | AK | Eurocode Inserts | 034 subframe Inserts | Ecs Carbon Diffuser | JHM CP | ECS Short Shifter |

  2. #442
    Veteran Member Four Rings tar's Avatar
    Join Date
    Jul 07 2009
    AZ Member #
    44682
    My Garage
    B8 S4, Orange B5 Avant
    Location
    Socal/IE

    https://www.ecstuning.com/b-genuine-...et/8r0698151l/

    Ignore above post

    Sent from my LM-G710VM using Tapatalk
    2011 S4 6mt Black/ Magma/ Carbon
    HRE ff01 | Rotiform ind-t | AWE Touring | P3 | Roc Euro | PLM | Eurocode Sways | Apr Stage 2 | H&R Sport | Q5 ECS Wave F/R | CR15 | AK | Eurocode Inserts | 034 subframe Inserts | Ecs Carbon Diffuser | JHM CP | ECS Short Shifter |

  3. #443
    Established Member Two Rings
    Join Date
    Mar 31 2008
    AZ Member #
    27118
    My Garage
    eS-4
    Location
    CAL*SO

    Is there a part number for these calipers? Gonna start scouring ebay

  4. #444
    Veteran Member Four Rings
    Join Date
    Jul 16 2012
    AZ Member #
    96959
    Location
    Mid-Atlantic

    Quote Originally Posted by Fresh.S4 View Post
    Is there a part number for these calipers? Gonna start scouring ebay
    Yes there are part numbers, in this thread. Page 1.
    2014 S4 - APR Stage 2 - APR CPS - AWE Touring w/ Resonated Downpipes - APR Carbonio Stage 2 Intake - Alu Kreuz - H&R Front and Rear Sways - 034 Inserts - Focal KX165 + Audison Bit4.9 + Audison 4D - Xpel Front End Wrap - Modesta BC-04 Paint Coating - Rayno S9 Tint - R8 Oil Cap - Porsche 911 Coolant Cap - CR15 Strut Tower Brace - Q5 Brembo Brakes - Goodridge Stainless Brake Lines - P3 Gauge (w/ Track Pack)

    My Seller Feedback Thread - http://bit.ly/2vD36PE

  5. #445
    Veteran Member Four Rings tar's Avatar
    Join Date
    Jul 07 2009
    AZ Member #
    44682
    My Garage
    B8 S4, Orange B5 Avant
    Location
    Socal/IE

    Or on ecs/similar. Never understood how people can't search or use sites for part lookup.


    Come on ted ur better than that.

    Sent from my LM-G710VM using Tapatalk
    2011 S4 6mt Black/ Magma/ Carbon
    HRE ff01 | Rotiform ind-t | AWE Touring | P3 | Roc Euro | PLM | Eurocode Sways | Apr Stage 2 | H&R Sport | Q5 ECS Wave F/R | CR15 | AK | Eurocode Inserts | 034 subframe Inserts | Ecs Carbon Diffuser | JHM CP | ECS Short Shifter |

  6. #446
    Active Member One Ring
    Join Date
    May 02 2017
    AZ Member #
    398762
    My Garage
    2013 Audi S4
    Location
    Seoul, South Korea

    Quote Originally Posted by Gusman1 View Post
    Iíll post the pictures again. These are the base Macan/Q5 calipers on an S4.





    Hey man what brake pads did you end up using with these calipers?

    Sent from my LGM-V300K using Audizine mobile app

  7. #447
    Established Member Two Rings Phil.Lmbrt's Avatar
    Join Date
    Apr 12 2017
    AZ Member #
    397604
    My Garage
    2012 B8 S4 & E46 325i
    Location
    La Sarre, Quebec

    Quick update :

    I have been running these with RBF600 and stainless lines at all 4 corners for like 10 000 km now and it has been great ! I like the feeling alot


    For those still wondering about fitment :

    1- Yes it is a direct drop in. Remove stock caliper with stock carrier, then install these and you're done

    2- S4 lines fit directly, they are the same as Q5 in fact

    3- I used Hawk HPS 5.0 pads for a 2010 Subaru STI, so these are confirmed for fitment. Only thing is you will have to remove/cut/bypass the brake pad wear sensor

    The calipers do come with the spring thing and the pins to mount the pads, but no pads
    2012 S4
    Brilliant Black | 6MT | Sports Diff | B&O
    Uni Dual Pulley | 3.208 Ratio | Roc-Euro | CTS | USP | 034 | JHM | PLM | Vossen | CR-15 | Macan Calipers | StopTech

  8. #448
    Senior Member Three Rings Spm58's Avatar
    Join Date
    Nov 03 2014
    AZ Member #
    292702
    Location
    Long beach, ny


    Installed mine 2 weeks ago, bought them through porsche, was like $480 total for the calipers. Also got ebc red stuff pads, stoptech stainless lines, and the ecs 2 piece rotors cus why not


    Sent from my iPhone using Tapatalk
    2015 sepang blue s4ē Ecs luft-technik carbon Intake

  9. #449
    Active Member One Ring
    Join Date
    May 02 2017
    AZ Member #
    398762
    My Garage
    2013 Audi S4
    Location
    Seoul, South Korea

    Quote Originally Posted by SleeperCar View Post
    Well I finally got them in, now they are off to be powder coated, Iím still debating which logo to go with, Brembo or Porsche.
    Hey man what brake pads did you end up purchasing that fit these calipers?

  10. #450
    Active Member One Ring
    Join Date
    May 02 2017
    AZ Member #
    398762
    My Garage
    2013 Audi S4
    Location
    Seoul, South Korea

    Quote Originally Posted by Spm58 View Post

    Installed mine 2 weeks ago, bought them through porsche, was like $480 total for the calipers. Also got ebc red stuff pads, stoptech stainless lines, and the ecs 2 piece rotors cus why not


    Sent from my iPhone using Tapatalk
    hey man did you need to do anything fancy to get the ebc red stuff pads to fit such as remove/cut/bypass the brake pad wear sensor? Also, was the model # of the pads you purchased DP32168C and where did purchase these pads at?

  11. #451
    Senior Member Three Rings Spm58's Avatar
    Join Date
    Nov 03 2014
    AZ Member #
    292702
    Location
    Long beach, ny

    Quote Originally Posted by enonono21 View Post
    hey man did you need to do anything fancy to get the ebc red stuff pads to fit such as remove/cut/bypass the brake pad wear sensor? Also, was the model # of the pads you purchased DP32168C and where did purchase these pads at?
    Nope, just swapped the sensor onto these pads and got them off ecs thereís only one that fits these on there


    Sent from my iPhone using Tapatalk
    2015 sepang blue s4ē Ecs luft-technik carbon Intake

  12. #452
    Active Member One Ring
    Join Date
    May 02 2017
    AZ Member #
    398762
    My Garage
    2013 Audi S4
    Location
    Seoul, South Korea

    Quote Originally Posted by Spm58 View Post
    Nope, just swapped the sensor onto these pads and got them off ecs thereís only one that fits these on there
    https://www.ecstuning.com/b-ebc-part.../dp32168c~ebc/

    do these happen to be the ones you bought? i tried narrowing search on ECS to 2017 porsche macan and the option for 2017 is not available.

    *edit: spelling*

  13. #453
    Senior Member Two Rings AFR1485's Avatar
    Join Date
    Nov 24 2015
    AZ Member #
    364901
    My Garage
    Fiat 500
    Location
    NYC

    Confirming the calipers clear the OEM 18Ē for those who runs a 18Ē winter setup.

    IMG_2044.jpgIMG_2047.jpgIMG_2043.jpg


    Sent from my iPhone using Audizine

  14. #454
    Senior Member Three Rings
    Join Date
    Oct 30 2012
    AZ Member #
    103197
    Location
    Oxford, MS
    Items for Sale

    For those looking for pads, this link on page 2 of this thread gives you pretty much all you need to know:
    http://www.audizine.com/forum/showth...uXel3m31dM7wb6

    With an advanced internet search tool called Google you can order pads in probably 10 min or less.

  15. #455
    Senior Member Three Rings VNA4's Avatar
    Join Date
    Jun 20 2015
    AZ Member #
    338438
    Location
    San Jose

    For those that went with the Porsche calipers, was the difference in breaking worth the upgrade vs OEM ?


    Sent from my iPhone using Audizine
    S4 B8.5 2014
    KW H.A.S. / EuroCode ‹SS Adjustable Sway Bar / AWE Touring Diamond Black / 034 Stage 2 / APR Stage II Carbon Back Pipe
    20 x 10.5 StanceWheels SF01 [PowderCoated Diamond Black]

    SOLD
    AUDI A4 B8 Premium Plus Sport:
    CTS k04/ APR k04 File / AWE Quad exhaust / FMIC: TR8
    VIP VRC 13 : 19X9.5 / Tires: 255/35/19 / Solo werks Coilovers / OE S4 Front Brake Upgrade Kit

  16. #456
    Veteran Member Four Rings washyourrhands's Avatar
    Join Date
    Mar 12 2008
    AZ Member #
    26372
    My Garage
    B8.5 S4
    Location
    San Jose, CA

    Quote Originally Posted by VNA4 View Post
    For those that went with the Porsche calipers, was the difference in breaking worth the upgrade vs OEM ?


    Sent from my iPhone using Audizine
    Yes. Itís how the car should have come from the factory


    Sent from my iPhone using Audizine
    2015 Audi S4
    2007 Audi RS4
    2002 Audi S4


    Instagram: @washyourrhands #bodenarmy

  17. #457
    Veteran Member Three Rings
    Join Date
    Jun 16 2011
    AZ Member #
    76997
    My Garage
    996tt
    Location
    MA
    Items for Sale

    Its been mentioned above, but these use the same pads as a 2010 WRX STI. Which means there are tons!!!!!!! of performance options.

    On a side note, they are also the same pad used in the RacingBrake Kits for their 4 piston setup!
    https://www.racingbrake.com/RB-XT960.../pd592-396.htm
    Garage:
    04 996tt, 06 Boxster S, 88 911 targa, 96 911 Convertible, 10 B8 S4

  18. #458
    Established Member Two Rings Phil.Lmbrt's Avatar
    Join Date
    Apr 12 2017
    AZ Member #
    397604
    My Garage
    2012 B8 S4 & E46 325i
    Location
    La Sarre, Quebec

    Quote Originally Posted by enonono21 View Post
    hey man did you need to do anything fancy to get the ebc red stuff pads to fit such as remove/cut/bypass the brake pad wear sensor? Also, was the model # of the pads you purchased DP32168C and where did purchase these pads at?

    For those that are getting 2010 STI pads, the brake pad wear sensor does not fit on them. I cut mine off and used VCDS to tell the car such a sensor does not exist so it doesn't code

    I found that it was super easy to get a visual on the pads with those calipers, so the sensor is not really needed
    2012 S4
    Brilliant Black | 6MT | Sports Diff | B&O
    Uni Dual Pulley | 3.208 Ratio | Roc-Euro | CTS | USP | 034 | JHM | PLM | Vossen | CR-15 | Macan Calipers | StopTech

  19. #459
    Veteran Member Three Rings
    Join Date
    Jun 16 2011
    AZ Member #
    76997
    My Garage
    996tt
    Location
    MA
    Items for Sale

    Quote Originally Posted by Phil.Lmbrt View Post
    For those that are getting 2010 STI pads, the brake pad wear sensor does not fit on them. I cut mine off and used VCDS to tell the car such a sensor does not exist so it doesn't code

    I found that it was super easy to get a visual on the pads with those calipers, so the sensor is not really needed
    Does the old cross the wires on an old sensor work? I need to do this because the Yellow Stuff pads I have right now dont work with the wear sensors so i have the brake light on.
    Garage:
    04 996tt, 06 Boxster S, 88 911 targa, 96 911 Convertible, 10 B8 S4

  20. #460
    Established Member Two Rings Phil.Lmbrt's Avatar
    Join Date
    Apr 12 2017
    AZ Member #
    397604
    My Garage
    2012 B8 S4 & E46 325i
    Location
    La Sarre, Quebec

    Quote Originally Posted by Gberg888 View Post
    Does the old cross the wires on an old sensor work? I need to do this because the Yellow Stuff pads I have right now dont work with the wear sensors so i have the brake light on.
    There are only 2 wires, so I guess it would work.. if not, you can code it out with VCDS
    2012 S4
    Brilliant Black | 6MT | Sports Diff | B&O
    Uni Dual Pulley | 3.208 Ratio | Roc-Euro | CTS | USP | 034 | JHM | PLM | Vossen | CR-15 | Macan Calipers | StopTech

  21. #461
    Active Member Two Rings j23a45m's Avatar
    Join Date
    Feb 07 2018
    AZ Member #
    413635
    My Garage
    16' s1000rr, 12' X5, 10' A3
    Location
    Lacaster, Pa

    Quote Originally Posted by Gberg888 View Post
    Does the old cross the wires on an old sensor work? I need to do this because the Yellow Stuff pads I have right now dont work with the wear sensors so i have the brake light on.
    This does work still


    Sent from my iPhone using Tapatalk
    '15 S4 P+ - Sepang Blue | DSG | Sport Differential | MMI | B&O | Side Assist | Panda Napa Leather | MODS- SC Badged | ECS Complete Drivetrain Mount Insert Kit | AWE 90MM Touring Exhaust | Injen Intake | 35% Tint | 6K Fog LED's | Morimoto 5500K | OBD Eleven Mods |

  22. #462
    Senior Member Three Rings
    Join Date
    Oct 30 2012
    AZ Member #
    103197
    Location
    Oxford, MS
    Items for Sale

    Quote Originally Posted by Phil.Lmbrt View Post
    There are only 2 wires, so I guess it would work.. if not, you can code it out with VCDS
    You can always zip-tie the sensor to something out of the way.

  23. #463
    Active Member Two Rings
    Join Date
    Jun 04 2018
    AZ Member #
    420012
    Location
    Orange County, California

    Do I need to order any other part from Porsche? Or just those 2 calipers and then pads?

  24. #464
    Active Member Two Rings j23a45m's Avatar
    Join Date
    Feb 07 2018
    AZ Member #
    413635
    My Garage
    16' s1000rr, 12' X5, 10' A3
    Location
    Lacaster, Pa

    Cheapest Q5 caliper source??

    Quote Originally Posted by Jamen View Post
    Do I need to order any other part from Porsche? Or just those 2 calipers and then pads?
    Calipers and pads only, this is a direct swap!


    Sent from my iPhone using Tapatalk
    '15 S4 P+ - Sepang Blue | DSG | Sport Differential | MMI | B&O | Side Assist | Panda Napa Leather | MODS- SC Badged | ECS Complete Drivetrain Mount Insert Kit | AWE 90MM Touring Exhaust | Injen Intake | 35% Tint | 6K Fog LED's | Morimoto 5500K | OBD Eleven Mods |

  25. #465
    Senior Member Three Rings
    Join Date
    Oct 30 2012
    AZ Member #
    103197
    Location
    Oxford, MS
    Items for Sale

    Quote Originally Posted by Jamen View Post
    Do I need to order any other part from Porsche? Or just those 2 calipers and then pads?
    I think some people earlier in the thread noted that you had to order the entire Porsche and then send back the parts you don't need.

  26. #466
    Established Member Two Rings Phil.Lmbrt's Avatar
    Join Date
    Apr 12 2017
    AZ Member #
    397604
    My Garage
    2012 B8 S4 & E46 325i
    Location
    La Sarre, Quebec

    Quote Originally Posted by Jamen View Post
    Do I need to order any other part from Porsche? Or just those 2 calipers and then pads?
    Calipers come with hardware, you need to source pads (see link in this thread, quoted a few posts before, for available options)

    Caliper is direct bolt on. It bolts where the OEM caliper carrier bolts. The line is a direct fit also

    Be sure they clear your wheels before buying, it might be a tight fit !
    2012 S4
    Brilliant Black | 6MT | Sports Diff | B&O
    Uni Dual Pulley | 3.208 Ratio | Roc-Euro | CTS | USP | 034 | JHM | PLM | Vossen | CR-15 | Macan Calipers | StopTech

  27. #467
    Active Member Two Rings
    Join Date
    Jul 26 2017
    AZ Member #
    403730
    Location
    Coquitlam BC

    Anyone have a before and after photos of the calipers from stock to the q5/porsche brembos?

    The more and more I look at them, they do not look much bigger, if at all.

    Just curious, any help would be appreciated.

  28. #468
    Active Member Two Rings j23a45m's Avatar
    Join Date
    Feb 07 2018
    AZ Member #
    413635
    My Garage
    16' s1000rr, 12' X5, 10' A3
    Location
    Lacaster, Pa

    Quote Originally Posted by alexbai94 View Post
    Anyone have a before and after photos of the calipers from stock to the q5/porsche brembos?

    The more and more I look at them, they do not look much bigger, if at all.

    Just curious, any help would be appreciated.
    One piston vs 4. Thatís where youíre not looking!


    Sent from my iPhone using Tapatalk
    '15 S4 P+ - Sepang Blue | DSG | Sport Differential | MMI | B&O | Side Assist | Panda Napa Leather | MODS- SC Badged | ECS Complete Drivetrain Mount Insert Kit | AWE 90MM Touring Exhaust | Injen Intake | 35% Tint | 6K Fog LED's | Morimoto 5500K | OBD Eleven Mods |

  29. #469
    Active Member Two Rings
    Join Date
    Jul 26 2017
    AZ Member #
    403730
    Location
    Coquitlam BC

    Quote Originally Posted by j23a45m View Post
    One piston vs 4. Thatís where youíre not looking!


    Sent from my iPhone using Tapatalk
    Oh I know the one piston vs 4, but I mean visually speaking, sitting behind the wheel, is there a difference in length?

  30. #470
    Active Member Two Rings j23a45m's Avatar
    Join Date
    Feb 07 2018
    AZ Member #
    413635
    My Garage
    16' s1000rr, 12' X5, 10' A3
    Location
    Lacaster, Pa

    Quote Originally Posted by alexbai94 View Post
    Oh I know the one piston vs 4, but I mean visually speaking, sitting behind the wheel, is there a difference in length?
    I thinks someone here measured them. Over all itís about it acceptable to a larger rotor, and putting its over all cooling and pad area covered!


    Sent from my iPhone using Tapatalk
    '15 S4 P+ - Sepang Blue | DSG | Sport Differential | MMI | B&O | Side Assist | Panda Napa Leather | MODS- SC Badged | ECS Complete Drivetrain Mount Insert Kit | AWE 90MM Touring Exhaust | Injen Intake | 35% Tint | 6K Fog LED's | Morimoto 5500K | OBD Eleven Mods |

  31. #471
    Veteran Member Three Rings A.C.'s Avatar
    Join Date
    Sep 15 2013
    AZ Member #
    123213
    My Garage
    2004 GLI
    Location
    Md

    Quote Originally Posted by j23a45m View Post
    One piston vs 4. Thatís where youíre not looking!


    Sent from my iPhone using Tapatalk
    Might be a dumb question. Is it recommended to add the Macan brake shields for better cooling? Thanks


    Sent from my iPhone using Tapatalk

  32. #472
    Active Member Two Rings j23a45m's Avatar
    Join Date
    Feb 07 2018
    AZ Member #
    413635
    My Garage
    16' s1000rr, 12' X5, 10' A3
    Location
    Lacaster, Pa

    Cheapest Q5 caliper source??

    Quote Originally Posted by A.C. View Post
    Might be a dumb question. Is it recommended to add the Macan brake shields for better cooling? Thanks


    Sent from my iPhone using Tapatalk
    If youíd like too. it should fit, them or the Q5ís


    Sent from my iPhone using Tapatalk
    '15 S4 P+ - Sepang Blue | DSG | Sport Differential | MMI | B&O | Side Assist | Panda Napa Leather | MODS- SC Badged | ECS Complete Drivetrain Mount Insert Kit | AWE 90MM Touring Exhaust | Injen Intake | 35% Tint | 6K Fog LED's | Morimoto 5500K | OBD Eleven Mods |

  33. #473
    Veteran Member Three Rings A.C.'s Avatar
    Join Date
    Sep 15 2013
    AZ Member #
    123213
    My Garage
    2004 GLI
    Location
    Md

    Good deal. Thank you sir!


    Sent from my iPhone using Tapatalk

  34. #474
    Senior Member Two Rings AFR1485's Avatar
    Join Date
    Nov 24 2015
    AZ Member #
    364901
    My Garage
    Fiat 500
    Location
    NYC

    Quote Originally Posted by A.C. View Post
    Good deal. Thank you sir!


    Sent from my iPhone using Tapatalk
    Macan also has air vents that direct air to the rotor. Thatís would need to be done to make the heat shield effective.


    Sent from my iPhone using Audizine

  35. #475
    Veteran Member Three Rings A.C.'s Avatar
    Join Date
    Sep 15 2013
    AZ Member #
    123213
    My Garage
    2004 GLI
    Location
    Md

    Quote Originally Posted by AFR1485 View Post
    Macan also has air vents that direct air to the rotor. Thatís would need to be done to make the heat shield effective.


    Sent from my iPhone using Audizine
    I presume these you are referencing? Thanks

    https://www.ecstuning.com/Porsche-20...Cooling/Ducts/




    Sent from my iPhone using Tapatalk

  36. #476
    Senior Member Two Rings AFR1485's Avatar
    Join Date
    Nov 24 2015
    AZ Member #
    364901
    My Garage
    Fiat 500
    Location
    NYC

    Quote Originally Posted by A.C. View Post
    I presume these you are referencing? Thanks

    https://www.ecstuning.com/Porsche-20...Cooling/Ducts/




    Sent from my iPhone using Tapatalk
    Yup! You got what I was saying. Thatís actually a good idea to add. Cooling definitely helps the pads and rotors.


    Sent from my iPhone using Tapatalk

  37. #477
    Veteran Member Three Rings A.C.'s Avatar
    Join Date
    Sep 15 2013
    AZ Member #
    123213
    My Garage
    2004 GLI
    Location
    Md

    Quote Originally Posted by AFR1485 View Post
    Yup! You got what I was saying. Thatís actually a good idea to add. Cooling definitely helps the pads and rotors.


    Sent from my iPhone using Tapatalk
    Awesome. Google was my friend! Much appreciated. Making my laundry list now


    Sent from my iPhone using Tapatalk

  38. #478
    Established Member Two Rings
    Join Date
    Jan 04 2018
    AZ Member #
    412037
    Location
    Modesto

    Posting for new comers reference. This was everything I needed, but also needed brake sensors. Ended up splicing the old ones.


    My exact amount paid

    95B-615-123-F Genuine Porsche Fixed Calliper $224.38
    95B-615-124-F Genuine Porsche Fixed Calliper $224.38
    Rear EBC Brakes GD1846 Brake Rotor Kit $147.13
    Akebono EUR1018 Rear Brake Pad $50.72
    StopTech 105.16630 Brake Pad, Ceramic $41.57
    Front Cross Drilled & Slotted Brake Rotors 8K0301MXSGMTLRA $189.95
    TYP 200 Brake Fluid - 1 Liter $14.95
    S4 Rear Calipers $200
    Black Caliper Paint $7
    High Heat Clear Paint $7
    Porsche Decals $8

    Total: $1115.08

  39. #479
    Veteran Member Four Rings SleeperCar's Avatar
    Join Date
    Jan 03 2012
    AZ Member #
    86119
    Location
    Owings Mills, Maryland

    Quote Originally Posted by enonono21 View Post
    Hey man what brake pads did you end up purchasing that fit these calipers?
    I got stoptech posi-quiets from rockauto
    2013 A4 Scuba Blue Metallic | APR stage 2 | AWE | Milltek | GFB+ | Suntek | Solo-Werks | Eurocode | Blesk | 034 | ECStuning | CR-15 Strut brace | Apikol | R8 Coilpacks | NGK | Akebono | Hawk |MRR-GF07 19x9.5 ET38 | 18x8.5 peeler reps ET 40 (winter)

  40. #480
    Established Member Two Rings Matthew_VA's Avatar
    Join Date
    Jul 05 2016
    AZ Member #
    375732
    Location
    Alexandria, VA

    I decided to jump on the bandwagon and purchased a pair of calipers from Porsche Parts Merriam today! Pretty excited to install 4 piston calipers on my S4. Just have to figure out which pads to go with.
    2012 S4 / Phantom Black Pearl Effect / Sports Diff / Carbon Atlas Trim / MMI / Fine Nappa Leather / B&O / 19" Peelers
    Mods: CR-15, 034 Motorsport Inlet Hose, aFe Pro Dry Air Filter, Modified air box, 034 Motorsport Trans Mount Insert, X-Brace, Stoptech Slotted Cryo Rotors, Hawk HPS 5.0, Chipwerke Pro Stage I, (pending: Macan 4-piston calipers, exhaust)

Page 12 of 13 FirstFirst ... 210111213 LastLast


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.