B9 S4 Wheel Gallery

[Sean@TAG]

Any thoughts on Rotiform IND in 19x10 et35 with 255 rubber? Seems a bit on the aggressive side from what I’ve seen.

Will be lowered a reasonable amount on KW HAS but not really wanting any rubbing. The 8.5 alternative seems the other end as not aggressive enough.

Here is a setup we ran in a 10" believe it or not. It came out amazing! In fact, this set is for sale at an unheard of price!

[EmmanueleDesign]

Our B9 S4 with DPE Flowform 20x9.5 ET35. Running a 3mm spacer in front to clear the brake caliper. Lowered on eMMOTION lowering springs.

https://www.emmanueledesign.com/coll...nt=37478616330

Sent from my Pixel XL using Tapatalk

[King James]

Here is a setup we ran in a 10" believe it or not. It came out amazing! In fact, this set is for sale at an unheard of price!

Hi thanks for the offer not looking for that style. And they look like 20’s? What tyre size? Any rubbing? What is it lowered with?

[Sean@TAG]

Hi thanks for the offer not looking for that style. And they look like 20’s? What tyre size? Any rubbing? What is it lowered with?

Got it. Just wanted to show you a 10" width mostly. It is in fact a 20" and it is lowered on KW V3.

[Joncoulson]

Lowered on ED springs 19x9.5 ET 38 BCForged RS40 In brushed black with 265/35/19 continental DWS06


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

Lowered on ED springs 19x9.5 ET 38 BCForged RS40 In brushed black with 265/35/19 continental DWS06

Sent from my iPhone using Tapatalk

They look fantastic! And those specs are dead-on. I'm 19x9.5 ET40/37 on 265. BC brushed black has changed a lot since I ran BC's on my A5.

IMG_2010 by Nemesis Autosport, on Flickr

[Joncoulson]

They look fantastic! And those specs are dead-on. I'm 19x9.5 ET40/37 on 265. BC brushed black has changed a lot since I ran BC's on my A5.

IMG_2010 by Nemesis Autosport, on Flickr

Thanks they are awesome as the finish is the dark brushed black they offer 2 shades.


Sent from my iPhone using Tapatalk

[Joncoulson]

Sent from my iPhone using Tapatalk

[yumsauce]

Lowered on ED springs 19x9.5 ET 38 BCForged RS40 In brushed black with 265/35/19 continental DWS06


Sent from my iPhone using Tapatalk

Nice! Have you experienced rubbing with the 265s? Also, are you running spacers with your set up?

[Joncoulson]

Nice! Have you experienced rubbing with the 265s? Also, are you running spacers with your set up?

Only light rubbing in rear with a passenger some running on passenger front while turning of I hit a bump no spacers these wheels are custom made to my car. Hubcentric and use OEM lugbolts.


Sent from my iPhone using Tapatalk

[millerns]

Fitment question for the group... Vossen is having a closeout sale right now and I'm looking at the CVT's in 19x10, offset +55. Square set all the way around, stock suspension with no plans to lower it for quite some time. I'm not familiar enough with offset and if this would poke outside the fenders. Probably would run 255s, possibly 265s.

Rubbing issues? Bad fit? Anything?

**Edit: Pretty certain this offset is no good.

[Sean@TAG]

Fitment question for the group... Vossen is having a closeout sale right now and I'm looking at the CVT's in 19x10, offset +55. Square set all the way around, stock suspension with no plans to lower it for quite some time. I'm not familiar enough with offset and if this would poke outside the fenders. Probably would run 255s, possibly 265s.

Rubbing issues? Bad fit? Anything?

**Edit: Pretty certain this offset is no good.

Your real problem here is inboard. It will not clear the suspension components unfortuantely. We can certainly help put with a proper wheel set however!

[Mops@Nemesis]

Bumping this guy.

20x9 ET38 CI-R in satin black, with 3mm front and 5mm rear spacers, wrapped in 255/30 rubbers.

[King James]

^looks great Mops - the 19" BBS sold yet?

Any thoughts on Avant Garde M510 19x9.5ET40 clearing the front brakes?

[BrockDM]

Not the prettiest but here is my winter set up. A nice and flush fitment compared to stock.

Wheels:
18x9 et 32 - TRmotorsport C4

Tires:
245/40/18 - Michelin X-ICE XI3

[Mops@Nemesis]

^looks great Mops - the 19" BBS sold yet?

Any thoughts on Avant Garde M510 19x9.5ET40 clearing the front brakes?

Thanks! Sold them lol. And yes, the 19's sold a couple of weeks ago. They're going on an Ara RS3 😎

I can certainly find out. Also look at the 19x9.5 V-FF 101 if you want to save some weight. 👊🏻

[Sean@TAG]

^looks great Mops - the 19" BBS sold yet?

Any thoughts on Avant Garde M510 19x9.5ET40 clearing the front brakes?

We ran a 20x10 ET40 from AG, and we had to run a 5mm spacer for them to clear (not to mention it did add quite a bit of poke.) That said, I would suggest a 9.5 ET37 for a no hassle fitment.

[TAGMotorsports]

Some recent S4 Fitments we have done.

VOSSEN VPS ML-X3 20x10 (For Sale BTW)


Also, this beauty sitting on 20x10 AG M580 Satin Silver




If you have any questions feel free to contact us HERE

[S4_Pedro]

Some recent S4 Fitments we have done.

VOSSEN VPS ML-X3 20x10 (For Sale BTW)


Also, this beauty sitting on 20x10 AG M580 Satin Silver




If you have any questions feel free to contact us HERE

Damn which grill is that on the lower picture that looks really good!


Sent from my iPhone using Audizine

[King James]

I can certainly find out. Also look at the 19x9.5 V-FF 101 if you want to save some weight. 👊🏻

That’d be great 👍🏻

We ran a 20x10 ET40 from AG, and we had to run a 5mm spacer for them to clear (not to mention it did add quite a bit of poke.) That said, I would suggest a 9.5 ET37 for a no hassle fitment.

As in 9.5 ET37 from AG wouldn’t require a spacer?

[Sean@TAG]

That’d be great 👍🏻



As in 9.5 ET37 from AG wouldn’t require a spacer?

Correct, no spacer.

[Mops@Nemesis]

As in 9.5 ET37 from AG wouldn’t require a spacer?

Just in from AG...

No they do not, B9 S4 calipers are bigger so you will need 8mm spacer to clear them, and will be aggressive. 👍🏼

[CT_S4]

I have an inquiry; I am debating between two wheels:

My first option is the HRE FF04 20x9 +25 and will be dropped on HR lowering springs. Basically the set from TAG but does this setup require spacers?

My other option is to have a custom set built Work Emotiom CR ultimate 2 piece; 20x10 +30-35?. I want to have the deepest concave wheel with no spacers or rubbing issues when lowered. Any insight is greatly appreciated.

[Mops@Nemesis]

The 20x9 et25 doesn’t need spacers. In fact that spec forces you to run 245 instead of the optimal 255.

The CR would be badass.


Mops On The Move

[CT_S4]

The 20x9 et25 doesn’t need spacers. In fact that spec forces you to run 245 instead of the optimal 255.

The CR would be badass.


Mops On The Move

What spec for the 20x9 would allow me to run 255? +35?

And what offset for the CRs? I don’t want to order them and then have issues as it’s a lot of money. ...

[Mops@Nemesis]

What spec for the 20x9 would allow me to run 255? +35?

And what offset for the CRs? I don’t want to order them and then have issues as it’s a lot of money. ...

ET30 would. Here is 20x9 ET33 front, ET31 rear.



For the CR, if you must run 10", you'd be stretching a 255 to get them to work. With a 10", I'd say ET42 is the number. I did a 10" ET42 on a B8 S4, and the customer had to run a 245. Work would have to tell us what the options are. And they would ensure the fit is correct without issue.

Happy to assist. 👍🏼

[CT_S4]

ET30 would. Here is 20x9 ET33 front, ET31 rear.



For the CR, if you must run 10", you'd be stretching a 255 to get them to work. With a 10", I'd say ET42 is the number. I did a 10" ET42 on a B8 S4, and the customer had to run a 245. Work would have to tell us what the options are. And they would ensure the fit is correct without issue.

Happy to assist. 👍🏼

Thanks. For the CR could I run 20x9.5 +35 with 255 tires you think? Thanks for all the help I really want the best drivability with no issues and that concave look.

[Mops@Nemesis]

Thanks. For the CR could I run 20x9.5 +35 with 255 tires you think? Thanks for all the help I really want the best drivability with no issues and that concave look.

Yep, that is actually the perfect fit I think. I have some 19x9.5 ET35 TE37 coming, and I'll be running 255. Here is 19x9.5 ET32...

[CT_S4]

Yep, that is actually the perfect fit I think. I have some 19x9.5 ET35 TE37 coming, and I'll be running 255. Here is 19x9.5 ET32...

Thank you for the advice. I’m thinking I’m going to go with the CRs as it will be different.

That setup looks sick btw ^^^^

[Mops@Nemesis]

Thank you for the advice. I’m thinking I’m going to go with the CRs as it will be different.

That setup looks sick btw ^^^^

Happy to help! And I fully support going CR :)

[CT_S4]

Happy to help! And I fully support going CR :)

After speaking with Work they recommended 20x9+25 R disk. So I don’t know because I can’t deem to find a picture of the CR2P in that size and similar size doesn’t have much of a concave look to them. So kind of bummed.

[Mops@Nemesis]

After speaking with Work they recommended 20x9+25 R disk. So I don’t know because I can’t deem to find a picture of the CR2P in that size and similar size doesn’t have much of a concave look to them. So kind of bummed.

Did they provide other fit options? Like 9.5 ET35? And they should be able to show you what the profile will look like.

Any interest in BC? Mine shipped yesterday...

[CT_S4]

Did they provide other fit options? Like 9.5 ET35? And they should be able to show you what the profile will look like.

Any interest in BC? Mine shipped yesterday...

Those look sick. Hmmmm.

But I was told no point in going to 9.5 as I couldn’t run the 265 tires and their flicker account I was given has hundreds of photos but couldn’t find the 9.0 R disk in +25 so idk.

But those look nice how much is a set ?

[Mops@Nemesis]

Those look sick. Hmmmm.

But I was told no point in going to 9.5 as I couldn’t run the 265 tires and their flicker account I was given has hundreds of photos but couldn’t find the 9.0 R disk in +25 so idk.

But those look nice how much is a set ?

Around $3,200 shipped for 19x9.5 including brushed finishes.

And I ran 265 on my 9.5 BBS, and I'll be running 265 on this 9.5 ET40. Some simply don't know what they're talking about ;)

[CT_S4]

Around $3,200 shipped for 19x9.5 including brushed finishes.

And I ran 265 on my 9.5 BBS, and I'll be running 265 on this 9.5 ET40. Some simply don't know what they're talking about ;)

Very interested. I will prob go with these or rs43. What do you recommend as far as fitment and offsets thanks

[Mops@Nemesis]

Very interested. I will prob go with these or rs43. What do you recommend as far as fitment and offsets thanks

I'll be more than happy to get you set up. And yea, they have several very nice looking monos. And they're extremely lightweight too.

For fitment, it sounds like you want a full looking tire fitment, and some concave. So 9.5 for sure. 9.5 ET40 is pretty perfect, but you could push it and go ET38 as well.

Let me know what I can do. And we can take this to [email protected] if you like. 👍🏼

[millerns]

No spacers.
19x8.5 ET35 with 255/35-19 tire!

I have a set of V710’s from my old B8 A4), 19x9.5 and I believe et40...any chance if you know they’ll clear the front brakes? I like the wheels but not sure they’ll fit with the bigger brakes than the old A4.

[Mel Bourne]

My BC Forged 19x9 were manufactured last week. Only issue is my S4 Avant delivery has been delayed two months. Car does not arrive until end of May. It was meant to be next week. Not happy.

[Mops@Nemesis]

My BC Forged 19x9 were manufactured last week. Only issue is my S4 Avant delivery has been delayed two months. Car does not arrive until end of May. It was meant to be next week. Not happy.

Very nice! That rear profile looks extra nice :)

[InfiniteEnd]

I'm looking at a set of AG M510s (19x8.5 +35). Do you guys think it will clear my b9 s4 brakes? All stock