B9 S4 Wheel Gallery

[Mops@Nemesis]

Thank you Mops! Im not stuck on the 10mm but I think I will try the 5mm just to clear the brake. You think that will be okay?


Sent from my iPhone using Audizine Forum

Worth test fitting for sure! If you end up needing 10mm go with the Supreme ones.


Mops on the Move

[Speedster00]

Hello fellas! All done and dialed. 19x9.5 + 35 square with a 10mm spacer up front. Coils next? What do you all recommend or ride on. Attachment 279844
Attachment 279845


Sent from my iPhone using Audizine Forum

See my post about spring tips I made last week. I like EMD springs. I'll post pics soon.

[kevok]

Rocking [mention]MopsNemesis [/mention] old BC Forged TD05 in Mag Blue w Matte clear

IMG_4855.jpg
IMG_4856.jpg


Sent from my iPhone using Audizine Forum

[Blackysbd]

Hi, I'm hoping someone with more knowledge than me can help. I have been offered a good deal on some wheels with a staggered set up. Front 8.5j x 19 et 38 and rears 9.5j x 19 et 38, they have Eagle F1 255x40 fitted all round. My 2018 S4 is lowered on 034 springs, will they fit?
Thanks in anticipation.

[Mops@Nemesis]

Hi, I'm hoping someone with more knowledge than me can help. I have been offered a good deal on some wheels with a staggered set up. Front 8.5j x 19 et 38 and rears 9.5j x 19 et 38, they have Eagle F1 255x40 fitted all round. My 2018 S4 is lowered on 034 springs, will they fit?
Thanks in anticipation.

The wheels would fit fine. I’d run a 10mm front spacer for perfect. But the tires are far too tall. You’d need 255/35.


Mops on the Move

[Mops@Nemesis]

Rocking [mention]MopsNemesis [/mention] old BC Forged TD05 in Mag Blue w Matte clear

Sent from my iPhone using Audizine Forum

Very nice! Love the finish.


Mops on the Move

[Blackysbd]

The wheels would fit fine. I’d run a 10mm front spacer for perfect. But the tires are far too tall. You’d need 255/35.


Mops on the Move

Thank you Sir!

[crhh95]

68530003018__76E057DC-034F-4D40-97CF-A3E7BE79C20F.jpg
IMG_8767.jpg
IMG_8768.jpg
Anyone have a clue how this happened? I didn’t think the alignment was out of spec enough to cause this. The outer portion of the tire had 3/32 left. The dealer said it was weird when I got my winters setup.

255/35 PS4S on 20x9 setup.


Sent from my iPhone using Audizine Forum

[SHCKR]

You're not alone.

[crhh95]

You're not alone.

I wonder if it’s rubbing. Your alignment looks like it was worse than mine. I just thought it was odd how the alignment was that far out of spec, even the shop commented on that bit


Sent from my iPhone using Audizine Forum

[Mr. Lin]

The wheels would fit fine. I’d run a 10mm front spacer for perfect. But the tires are far too tall. You’d need 255/35.


Mops on the Move

even with the 8.5/9.5 setup?
this isn't an issue for audi diffs?

[Mops@Nemesis]

even with the 8.5/9.5 setup?
this isn't an issue for audi diffs?

Totally fine. It’s all about the front/rear tire diameter variance. I’ve run 9/10.5.


Mops on the Move

[brentmc79]

Just ordered some TSW Bathurst 19x9.5 +39 wheels with 255/35 tires. Will I need spacers?

[Mops@Nemesis]

Just ordered some TSW Bathurst 19x9.5 +39 wheels with 255/35 tires. Will I need spacers?

We’ve done a bunch of Bathurst but never this spec on the B9 S cars. You could easily run 5mm spacers if needed so test fit and go from there.


Mops on the Move

[flee]

Totally fine. It’s all about the front/rear tire diameter variance. I’ve run 9/10.5.


Mops on the Move

Omg I love that rim, only reason I didn’t buy was my neighbor had them. Lol and I didn’t want to be that guy. Post when you get ‘em


Sent from my iPhone using Tapatalk

[BaggedB9S4]

Got to test sample the new Variant Helium wheel in bronze, this one is 19x10 ET28.5. Im not personally sure if I want to go with this color, im leaning towards polishing the gunmetal xenons I currently have. Thoughts?

[Sebastian Tu]

Bronze is hot, idk if it's because it's different/refreshing to your current wheels but it looks great

Got to test sample the new Variant Helium wheel in bronze, this one is 19x10 ET28.5. Im not personally sure if I want to go with this color, im leaning towards polishing the gunmetal xenons I currently have. Thoughts?

[FromS60toB61.8t]

Got to test sample the new Variant Helium wheel in bronze, this one is 19x10 ET28.5. Im not personally sure if I want to go with this color, im leaning towards polishing the gunmetal xenons I currently have. Thoughts?

I don't usually like bronze myself, but it does look good on the dark blue. Gives the car a nice subtle color contrast that isn't a gray-tone

[Mops@Nemesis]

Got to test sample the new Variant Helium wheel in bronze, this one is 19x10 ET28.5. Im not personally sure if I want to go with this color, im leaning towards polishing the gunmetal xenons I currently have. Thoughts?

Finish aside, I prefer the Xenon on your car. They have more material at the center and cleaner at the center... suits your car best. Your build is "aggressive" and I like the balance provided by the Xenon.

[BaggedB9S4]

Finish aside, I prefer the Xenon on your car. They have more material at the center and cleaner at the center... suits your car best. Your build is "aggressive" and I like the balance provided by the Xenon.

Thanks Mops! I normally am one to change wheels every 6 months but have had these xenon’s on for a long time. For me it’s when I walk away from the car, turn around, and say damn. I also rotated and flipped my tires. Really happy with how the hankook v12’s are holding up, I didn’t expect them to last

[thereef]

Put on some s5 peelers as a stopgap between my HRE's and the incoming BC Forged. Don't mind the brake dust.

19x9 +33 on 255/35/19

[S4B9ner]

Finally got my BCF RZ23 in brushed silver with gunmetal center cap. Figured to share here for others' reference.

The rim specs are 19*9 with et35 in the front and et32 in the rear. Tires are Goodyear F1A6 255/35.

These are not particular impressive at the frist glence and not as aggressive as most of the people would like to be. But it perfectly keeps the stock feeling, in the meantime gives a bit of flush feeling. Matches the feeling I wanted. Really have to thank Mop on providing so many feedbacks so I can learn from the others.

Any thoughts guys?

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[Mops@Nemesis]

Finally got my BCF RZ23 in brushed silver with gunmetal center cap. Figured to share here for others' reference.

The rim specs are 19*9 with et35 in the front and et32 in the rear. Tires are Goodyear F1A6 255/35.

These are not particular impressive at the frist glence and not as aggressive as most of the people would like to be. But it perfectly keeps the stock feeling, in the meantime gives a bit of flush feeling. Matches the feeling I wanted. Really have to thank Mop on providing so many feedbacks so I can learn from the others.

Any thoughts guys?

Really really nice my man! That rear concave is pretty special haha! If you ever want to tinker, the "W" Sport Cap would be a nice touch.

[Mops@Nemesis]

New offering from BBS -

REV7 in 19x9.5 ET36. 21.1 pounds per wheel.

[brentmc79]

Thanks Mops!

[Mops@Nemesis]

Thanks Mops!

For sure! The RSe102 is always a win. I think I told you, but I ordered the same set in Hyper shortly after haha.


Mops on the Move

[S4B9ner]

Really really nice my man! That rear concave is pretty special haha! If you ever want to tinker, the "W" Sport Cap would be a nice touch.

Yeah the center cap is a pity. I wanted to change it to the OEM audi cap but seems like additional fee will incur to make the fitment.

The red W cap though, is a bit too much to me. You can see the whole car, even the brake calipers, are painted black and white. The interier is also black and grey ish white. So for the sack of purity, I went for gunmetal center cap, which looks closer to the stock center cap.

But everyone's taste is different lol

And thank you for the guidence on the offset. It looks really nice.

[brentmc79]

Tires mounted and two coats of ceramic applied. I’ll mount them on the car and get some pics tomorrow.

[FromS60toB61.8t]

New offering from BBS -

REV7 in 19x9.5 ET36. 21.1 pounds per wheel.

I'm in love... Now to sell my other 3 sets of wheels to fund these.
I'm assuming the 19x10.5 they offer won't fit on the S4 will it?

[Mops@Nemesis]

I'm in love... Now to sell my other 3 sets of wheels to fund these.
I'm assuming the 19x10.5 they offer won't fit on the S4 will it?

I support that. I’ll do what I can to assist.

The 10.5 et35 would be pretty wild. A good bit of negative camber and tire stretch would be needed.


Mops on the Move

[Mops@Nemesis]

Yeah the center cap is a pity. I wanted to change it to the OEM audi cap but seems like additional fee will incur to make the fitment.

The red W cap though, is a bit too much to me. You can see the whole car, even the brake calipers, are painted black and white. The interier is also black and grey ish white. So for the sack of purity, I went for gunmetal center cap, which looks closer to the stock center cap.

But everyone's taste is different lol

And thank you for the guidence on the offset. It looks really nice.

So you know, BC will sell raw and blank caps for pretty cheap. So you could have rings engraved and DIY paint them any color you like.

I appreciate the thought for sure. The gunmetal caps work well. My thought was the black and red would tie in with the black and red caliper.

Always happy to assist!

[brentmc79]

[CrazyCanuck17]

For sure! The RSe102 is always a win. I think I told you, but I ordered the same set in Hyper shortly after haha.


Mops on the Move

Been a while Mops, hope all is well!

These be the new standard wheels it seems!! If only neuspeed would offer them in optimized dim/offset. I tried to tell them they'd sell like hotcakes with b9 owners... unfortunately they didn't bite. On the flip, with 10mm spacers, I can still clean my front caliper with ease.

[Mops@Nemesis]

Looks awesome Brent!

Been a while Mops, hope all is well!

These be the new standard wheels it seems!! If only neuspeed would offer them in optimized dim/offset. I tried to tell them they'd sell like hotcakes with b9 owners... unfortunately they didn't bite. On the flip, with 10mm spacers, I can still clean my front caliper with ease.

Yoooo Rob!

Yep, a mild concave 9.5 ET35 would be fantastic. I've for sure mentioned it too, as they come to us for new wheel specs. For 255 AS4 will 10mm be the ticket?

[CrazyCanuck17]

Yoooo Rob!

Yep, a mild concave 9.5 ET35 would be fantastic. I've for sure mentioned it too, as they come to us for new wheel specs. For 255 AS4 will 10mm be the ticket?

Damn right, they should be coming to you for specsl!!

Yea, IMO at least... 19x9.0 et30 with 255 AS4 is ideal for folks on 034/HR/EMD lowering springs. With springs, front camber naturally increases to -1.65ish and my rear is set to -1.2. Max out concavity too... ~15mm of caliper clearance at that spec with current profile of the wheel... plenty of space for more concavity!

The profile they use on their et25 rse102 wheel is so much better than the et40. Too bad et25 is simply too much for S4. Wonder if that exact profile would clear caliper if they used it on a 19x9 et30 version, or 19x9.5 et35-36. If they offered either of those specs with optimized profile in the future, I'd actually sell my rse102's and re-buy the tweaked spec. Also wish they offered this wheel in their gloss bronze!

Convince them please, I'm ready to order the "Mop's spec" wheel in gloss bronze!!

[Zlatanknowsbest]

Enjoying the last few bits of warm weather.

VMR 802's

[Sheik723]

Thanks so much! [mention]MopsNemesis [/mention]

IMG_3395.jpg
IMG_3396.jpg
IMG_3394.jpg
Enkei GTC02
19X9.5 +40 (Rear Face)

Fronts do need a 10mm spacer so I am weighing my options right now. Rear fit like a glove.

I’m wanting to run a 265/35/19, I’m lowered on 034.


Sent from my iPhone using Audizine Forum

[Mops@Nemesis]

Thanks so much! [mention]MopsNemesis [/mention]

Enkei GTC02
19X9.5 +40 (Rear Face)

Fronts do need a 10mm spacer so I am weighing my options right now. Rear fit like a glove.

I’m wanting to run a 265/35/19, I’m lowered on 034.

Sent from my iPhone using Audizine Forum

Ah! Would not have thought. How much clearance do you have with the 10mm? Really only need a couple of mm's. Wish a 5mm would work.

[Diokhan]

Enjoying the last few bits of warm weather.

VMR 802's

That's an awesome shot!

[Zlatanknowsbest]

Thank you!


Sent from my iPhone using Audizine Forum