B9 S4 Wheel Gallery

[scottst]

Hey guys. Trying to figure out wheel compatibility between my b8.5 SQ5 and a new S4. I'm close to securing one. I have two sets for my SQ5. My favorite is a set is the 20x9 ET25 CHRs I bought from Mops. The SQ5 also came OE with 20x8.5? ET33 wheels. The gray with polished surface ones (don't know the name, will post a pic here in a bit). Would they fit on a new S4? Would I *want* them to? I tend to like lighter/smaller wheels for my cars so this might be a bit much for the S4. But, I hate to see good wheels go to waste. Pics here in a minute.

[Mops@Nemesis]

Hey Scott,

You won’t like the CH-R fitment on the S4. But the OEM is pretty spot on. Run a 255/30 with those. 5mm spacers would flush it.


Mops on the Move

[scottst]

Hey Scott,

You won’t like the CH-R fitment on the S4. But the OEM is pretty spot on. Run a 255/30 with those. 5mm spacers would flush it.


Mops on the Move

Thanks Ben! That's what I was afraid of :(

I like the CHRs... maybe more than the car...

Any idea what OE 19 wheel weights are for the S4 wheels compared to the 20s on the SQ5s?

[AldermanToffee]

Mops,

What's your recommendations for a lightweight 19" x 9.5J wheel? This would be for an S4.

I'm going full frame so need the extra meat that 9.5J would be able to support.

[Mops@Nemesis]

Thanks Ben! That's what I was afraid of :(

I like the CHRs... maybe more than the car...

Any idea what OE 19 wheel weights are for the S4 wheels compared to the 20s on the SQ5s?

Certainly sir!

They do a 20x8.5 ET40 CH-R that looks the same as your 20x9, or even better, the 19x9.5 ET35 or ET45.

I'm not certain, but it should be ~29 vs 32.

Mops,

What's your recommendations for a lightweight 19" x 9.5J wheel? This would be for an S4.

I'm going full frame so need the extra meat that 9.5J would be able to support.

Hi there,

BC Forged mono KL or RZ. You'd be around 20.5 pounds per.

[AldermanToffee]

Certainly sir!

They do a 20x8.5 ET40 CH-R that looks the same as your 20x9, or even better, the 19x9.5 ET35 or ET45.

I'm not certain, but it should be ~29 vs 32.




Hi there,

BC Forged mono KL or RZ. You'd be around 20.5 pounds per.

I'll check em out. Thanks!

[Mops@Nemesis]

I'll check em out. Thanks!

For sure! On my B9 S4s, I run the BC Forged RS31, TD03 and TD05, all 19x9.5. You can see photos below -

https://www.flickr.com/photos/919992...57696562694755

[scottst]

Last question for a bit. I searched and couldn't find this. What is the stock offset for the factory 19s on the S4? 45? Are they 8.5s or 8s? Thanks!

[scadaGuy]

Last question for a bit. I searched and couldn't find this. What is the stock offset for the factory 19s on the S4? 45? Are they 8.5s or 8s? Thanks!

I think they are 8.5 et40

[Zlatanknowsbest]

Anyone running 245/35/19s on a 9.5 inch wheel?

I have a brand new set of tires I’d like to re-use.

Any pics of the stretch?


Sent from my iPhone using Audizine Forum

[Mops@Nemesis]

Last question for a bit. I searched and couldn't find this. What is the stock offset for the factory 19s on the S4? 45? Are they 8.5s or 8s? Thanks!

19x8.5 ET40 👍🏼

Anyone running 245/35/19s on a 9.5 inch wheel?

I have a brand new set of tires I’d like to re-use.

Any pics of the stretch?

Sent from my iPhone using Audizine Forum

[Zlatanknowsbest]

19x8.5 ET40 👍🏼

THANK YOU!

[njavier03]

For sure! On my B9 S4s, I run the BC Forged RS31, TD03 and TD05, all 19x9.5. You can see photos below -

https://www.flickr.com/photos/919992...57696562694755

on 265s correct?

[scadaGuy]

I'll check em out. Thanks!

I went with BC forged in 20x9.5 with 265/30 PS4's and they are about 4.5 lbs lighter than stock.

[scadaGuy]

Got these in last week
BC Forged RZ21
20x9.5
Staggered offset and profiles

Shout out to Mops at Nemesis Autosports for all his help/support and answering all my questions. He made spacing the wheels a breeze.

I'll post some pics with them mounted when the weather is better and I figure out the best way to add pictures here haha

[BrockDM]

Got these in last week
BC Forged RZ21
20x9.5
Staggered offset and profiles

Shout out to Mops at Nemesis Autosports for all his help/support and answering all my questions. He made spacing the wheels a breeze.

I'll post some pics with them mounted when the weather is better and I figure out the best way to add pictures here haha

Those look awesome! Can't wait to see them mounted up

[Mops@Nemesis]

Got these in last week
BC Forged RZ21
20x9.5
Staggered offset and profiles

They look awesome Gerald! Looking forward to seeing them mounted.

I just ordered a Matte GM set for my SQ5.

[scadaGuy]

Those look awesome! Can't wait to see them mounted up

Thanks Brock. Hoping we’re back to sunshine this week.

They look awesome Gerald! Looking forward to seeing them mounted.

I just ordered a Matte GM set for my SQ5.

Thanks Mops. The matte GM and the Navarra blue are a good combo. Excited to see what wheel you went with.



Sent from my iPhone using Audizine

[BrockDM]

Realized I never posted the new setup in here. Got one last photo op in before swapping to my winter wheels.

BC Forged TD03 in Brushed Black
19x9.5 et35
265/35 Michelin PS4S

[Sebastian Tu]

IMG_4206.jpgIMG_4202.jpgIMG_4201.jpg

My new to me '19 Navarra s4 replacing my RIP '18 Mythos black s4
I put on the variant radons again and the awe intake. Along with several small things like the radar and Alcantara shift lever.

In the mail currently is:
KW has kit
Carbnlabs carbon front splitter
Apr intercooler
ecs carbon diffuser

[Mops@Nemesis]

My new to me '19 Navarra s4 replacing my RIP '18 Mythos black s4

I'm sorry about the '18 Sebastian, but I like this spec better anyways haha.

We'll have the HAS kit heading your way by noon tomorrow. 👍🏼

[TimDeRosa]

Any thoughts on being able to use a 10mm spacer with 19x8.5 wheels and a 255/35 tire? Tires I was thinking of are the DWS 06 plus with the VMR 802 wheels. Lowered on EMD springs.

[Mops@Nemesis]

Any thoughts on being able to use a 10mm spacer with 19x8.5 wheels and a 255/35 tire? Tires I was thinking of are the DWS 06 plus with the VMR 802 wheels.

What’s the V802 offset?


Mops on the Move

[TimDeRosa]

What’s the V802 offset?


Mops on the Move

whoops. et35!

[Mops@Nemesis]

whoops. et35!

10mm will be very aggressive. 19x8.5 et30 on 255 is pretty perfect. I would do 5mm.


Mops on the Move

[AudiSportDre]

IMG_5473.jpg
Is anyone aware if these stock 18s clear S4 brakes? Anyone run them for winter or anything? Wheels are 18x8 Et40 with 10mm spacer up front. Figured this was the best place to ask. Just cooked my brakes at my last track event lol


Sent from my iPhone using Audizine Forum

[HurrayFive]

IMG_5473.jpg
Is anyone aware if these stock 18s clear S4 brakes? Anyone run them for winter or anything? Wheels are 18x8 Et40 with 10mm spacer up front. Figured this was the best place to ask. Just cooked my brakes at my last track event lol


Sent from my iPhone using Audizine Forum

Yes they do, stock S4 wheels w/ all-season tire package, 18x8 ET40 🙃

[AldermanToffee]

Probably a good place to ask.

Bilstein B16 vs KW V3?

This is for a B9 S4 on 265/35/19, 19x9.5J ET35.

[HurrayFive]

Probably a good place to ask.

Bilstein B16 vs KW V3?

This is for a B9 S4 on 265/35/19, 19x9.5J ET35.

Also curious what others think, I was planning on going w/ the V3's.

[TimDeRosa]

10mm will be very aggressive. 19x8.5 et30 on 255 is pretty perfect. I would do 5mm.


Mops on the Move

Would my logic be faulty then for saying that with a 245 tire then 19x8.5 et25 would work?

[Mops@Nemesis]

Would my logic be faulty then for saying that with a 245 tire then 19x8.5 et25 would work?

Yep, you're correct. Just as many run 12mm/15mm on 245 with the stock 8.5 ET40 wheels.

[Vinhouw]

Rotiform FLG 19x8.5 ET 45

12.5 mm spacers rear, 10 mm spacer front

245/40 19

[flee]

I have been waiting for my rims since Mid October and sadly today I called and they are still off shore somewhere. Guess it was a bad time to buy rims not in stock. The messed up thing is I currently have HRE FF10’s but hate them as they are pita to keep clean. All of y’all posting ur rim pics makes me jealous 😩

[struong]

I've waited around 6 months for these guys beginning of pandemic.

VFF103 ET 35 with 3mm spacers

[Mops@Nemesis]

I've waited around 6 months for these guys beginning of pandemic.

VFF103 ET 35 with 3mm spacers

Worth it!

It’s been 11 months since they’ve had more in stock.


Mops on the Move

[Diokhan]

Worth it!

It’s been 11 months since they’ve had more in stock.


Mops on the Move

Yep, completely worth it! - And that timeline's no exaggeration. I've had a set on order for almost 13 months now and if they didn't looks so darn good on the car I would have come up with something else a while ago. The wait is going to have me appreciate them that much more.

[Mops@Nemesis]

Yep, completely worth it! - And that timeline's no exaggeration. I've had a set on order for almost 13 months now and if they didn't looks so darn good on the car I would have come up with something else a while ago. The wait is going to have me appreciate them that much more.

And it’s almost over Riley! We expect to provide tracking late this week.


Mops on the Move

[Diokhan]

Seriously? That's awesome!! While I was home next week I was going to email you about an alternate set to run this spring until these came. Now I won't have to ----unless I just jinxed myself just now :/ Ha ha!

[Mops@Nemesis]

Seriously? That's awesome!! While I was home next week I was going to email you about an alternate set to run this spring until these came. Now I won't have to ----unless I just jinxed myself just now :/ Ha ha!

For serious! I hope you did not fall down when you read that. 😆 Worst worst case would be shipping by end of next week. I message them this morning to confirm.

[Diokhan]

Holy crap! I managed to hold it together, but I did look up if the tires I wanted were in stock. I'll keep a look out for tracking unless you email me otherwise. Thank you!