B9 S4 Wheel Gallery

**GustaS4** · 09-26-2017 11:13 AM

Originally Posted by STICKY RICE

Love this. What wheels?

**TAGMotorsports** · 09-27-2017 09:31 AM

Originally Posted by STICKY RICE

Tommy's got me covered on the HAS kit. Didn't even know anyone had upper control arms for the car, though.

Some camber adjustment for the front would be nice.

Pm'd

**STICKY RICE** · 09-27-2017 10:37 AM

Originally Posted by GustaS4

Love this. What wheels?

Vorsteiner V-FF 103's 20x9 ET35.

**Will@Nemesis** · 09-29-2017 06:05 AM

Sent from my iPhone using Audizine

**raudiace4** · 09-29-2017 12:52 PM

Originally Posted by b9s4beast

Sent from my iPhone using Audizine

Super clean

**mystik4l06** · 09-29-2017 02:15 PM

Rohana RFX5 20x9 ET25
245/30ZR20

I literally just saw this thread didn't notice there was another one made

Sent from my iPhone using Audizine

**STICKY RICE** · 09-30-2017 10:30 AM

Spacers are on now which brings my wheels to...

20x9 ET30 in the front
20x9 ET28 in the rear
255/35's

Pretty happy with how it's sitting. Some minor rub in the back if I'm on the freeway doing 80 or more and I hit a large bump. Stupid felt liner.

Here's some quick potato pics.

**Mops@Nemesis** · 09-30-2017 12:14 PM

Very nice Jon! What are the camber specs at the rear?

**STICKY RICE** · 09-30-2017 12:24 PM

Not sure anymore. Didn't have time to align it and don't know the old spec off the top of my head. Probably didn't change too much.

Was planning on going back in when the exhaust got here. Throw that on, along with the trunk spoiler, and maybe toss it up on the rack to see about the alignment. Depends on if Thomas has the time.

**A.C.** · 09-30-2017 01:37 PM

Originally Posted by Mops@SupremePower

Very nice Jon! What are the camber specs at the rear?

Mops. I haven’t forgotten about you and the VFF-102. Had surgery and limited with my physical activities. Scheduled to have the wheels and tires installed on the 18th amongst other maintenance. That’s the soonest I can due to work and other obligations.

Sent from my iPhone using Tapatalk

**Mops@Nemesis** · 09-30-2017 05:36 PM

Originally Posted by A.C.

Mops. I haven’t forgotten about you and the VFF-102. Had surgery and limited with my physical activities. Scheduled to have the wheels and tires installed on the 18th amongst other maintenance. That’s the soonest I can due to work and other obligations.

Sent from my iPhone using Tapatalk

Of course Gary! I hope your recovery is going well. 👍🏼

**Mops@Nemesis** · 09-30-2017 05:38 PM

Originally Posted by STICKY RICE

Not sure anymore. Didn't have time to align it and don't know the old spec off the top of my head. Probably didn't change too much.

Was planning on going back in when the exhaust got here. Throw that on, along with the trunk spoiler, and maybe toss it up on the rack to see about the alignment. Depends on if Thomas has the time.

Gotcha. A few degrees could alleviate your rub.

**bicyclefitguru** · 09-30-2017 05:39 PM

Originally Posted by HurrayFive

Bruh, I think that looks fantastic. How are those ED springs? Any noises or unruly harshness so far? I'm looking for a drop pronto and that's right where I want to be.

I think the ED spring drop is the nicest of current options

Sent from my iPhone using Audizine

**Southern** · 09-30-2017 06:16 PM

Originally Posted by mystik4l06

Rohana RFX5 20x9 ET25
245/30ZR20

I literally just saw this thread didn't notice there was another one made

Sent from my iPhone using Audizine

Niiice, on what are you lowered?

Originally Posted by STICKY RICE

Spacers are on now which brings my wheels to...

20x9 ET30 in the front
20x9 ET28 in the rear
255/35's

Pretty happy with how it's sitting. Some minor rub in the back if I'm on the freeway doing 80 or more and I hit a large bump. Stupid felt liner.

Here's some quick potato pics.

Oh la la, the spacers perfected the stance. Did you end up going with the HAS kit too?

**mystik4l06** · 09-30-2017 06:49 PM

Originally Posted by Southern

Niiice, on what are you lowered?

Oh la la, the spacers perfected the stance. Did you end up going with the HAS kit too?

Thanks! They are sitting on H&R drop springs

Sent from my iPhone using Audizine

**STICKY RICE** · 09-30-2017 08:37 PM

Originally Posted by Mops@SupremePower

Gotcha. A few degrees could alleviate your rub.

Yeah, that's what I'm thinking. Gonna try going back in next week sometime and get the alignment sorted.

Originally Posted by Southern

Oh la la, the spacers perfected the stance. Did you end up going with the HAS kit too?

Not yet! This is still on ED springs. I may combine the HAS kit with the upper control arms all in one go later on. Going to drive it like this for a week and see how it feels.

**Joncoulson** · 10-01-2017 06:54 AM

19x8.5 et 35 rotiform KPS With stock 245/35/19 and 8mm spacer to clear brakes.

Sent from my iPhone using Tapatalk

**TAGMotorsports** · 10-03-2017 10:44 AM

-20x10" Rotiform CCV machined Finish
-255/30/20 Pirelli P Zero Tires
-KW HAS

If you have any questions feel free to contact us HERE

**EmmanueleDesign** · 10-04-2017 01:41 PM

Some updated photos of STICKY RICE's S4!

Wheels: Vorsteiner VFF103 20x9 ET35
5mm Front Spacer, 7mm Rear Spacer
255/35/20 Tires
Suspension: eMMOTION Lowering Springs

**Joncoulson** · 10-07-2017 06:20 PM

I’m about to give up my car will not stop vibrating I’m on my second set of spacers!! Please chime in and let me know what I’m doing wrong 19x8.5 et 35 wheels.

Sent from my iPhone using Tapatalk

**S4_Pedro** · 10-08-2017 08:27 AM

What size spacers Jon? And which set did you go with and also did you update the bolts also with the spacers?

Edit: I saw you went with 8mm.
Sent from my iPhone using Audizine

**Joncoulson** · 10-08-2017 08:43 AM

I started with 8mm non hubcentric ecs spacers then purchased 42dd hubcentric 8mm spacers and also bought the correct bolts from ecs.

Sent from my iPhone using Tapatalk

**Joncoulson** · 10-08-2017 08:43 AM

So I still have both sets.

Sent from my iPhone using Tapatalk

**Joncoulson** · 10-08-2017 02:49 PM

Will b8 peelers fit b9 brakes

Sent from my iPhone using Tapatalk

**S4_Pedro** · 10-08-2017 09:48 PM

That’s really weird even with the hubcentric ones I mean did you torque correctly and in Star pattern or maybe it’s not sitting correctly on the hub and wheel, which I’m sure you looked at all that. I got me a pair from esc (8mm hubcentric) and extended bolts no issues so far knock on wood but I’d hate to see you spend more money and run into the same issue tho

Sent from my iPhone using Audizine

**STICKY RICE** · 10-13-2017 05:22 PM

New setup. Same wheels but in a better sizing.

Vorsteiner V-FF 103's 19x9.5 ET37
5mm spacer in the front to clear the brakes
7mm in the back from the previous setup

No rubbing when we were testing it...

Sent from the mobile command post

**Mops@Nemesis** · 10-13-2017 06:57 PM

Hell yea Jon! Looks better, IMO :)

**STICKY RICE** · 10-13-2017 07:13 PM

Originally Posted by Mops@SupremePower

Hell yea Jon! Looks better, IMO :)

Agreed. Looks better, drives better, etc. Very happy with it now. Thanks for hooking it up with this set.

**Joncoulson** · 10-13-2017 07:47 PM

Originally Posted by S4_Pedro

That’s really weird even with the hubcentric ones I mean did you torque correctly and in Star pattern or maybe it’s not sitting correctly on the hub and wheel, which I’m sure you looked at all that. I got me a pair from esc (8mm hubcentric) and extended bolts no issues so far knock on wood but I’d hate to see you spend more money and run into the same issue tho

Sent from my iPhone using Audizine

I’ve done all of that so mine is going back stock tmw and my wheels are for sale.

Sent from my iPhone using Tapatalk

**Mops@Nemesis** · 10-14-2017 06:40 AM

Lil teaser for Mr Rice

Dropped him back to 19", added some concave, lessen the FTG and fitted some pipes.

We've got many pics. I'm certain Jon will do to thread to share them all.

Mops on the move

**yumsauce** · 10-14-2017 09:39 AM

Definitely dig the 19”s more. Tires are 255?

**Southern** · 10-14-2017 09:57 AM

Originally Posted by sticky rice

new setup. Same wheels but in a better sizing.

Vorsteiner v-ff 103's 19x9.5 et37
5mm spacer in the front to clear the brakes
7mm in the back from the previous setup

no rubbing when we were testing it...

Originally Posted by mops@supremepower

lil teaser for mr rice

dropped him back to 19", added some concave, lessen the ftg and fitted some pipes.

We've got many pics. I'm certain jon will do to thread to share them all.

mops on the move

Niiiiice! That looks lovely.

Ordered the KW HAS kit, 19x9.5 ET 35 Stance SC9 wheels this week, and will install everything once some low-dust brake pads finally get released.

**STICKY RICE** · 10-14-2017 10:49 AM

Thanks, Mops.

Here are the rest of the shots.

**Joncoulson** · 10-14-2017 04:14 PM

My car is back on stocks gonna have BC FORGED make me a set for the b9 so I know they fit.

my sons B8 on BC’s

Sent from my iPhone using Tapatalk

**STICKY RICE** · 10-14-2017 05:03 PM

Originally Posted by yumsauce

Definitely dig the 19”s more. Tires are 255?

Yup. 255/35's.

Originally Posted by Joncoulson

My car is back on stocks gonna have BC FORGED make me a set for the b9 so I know they fit.

my sons B8 on BC’s

Sent from my iPhone using Tapatalk

Problem with being an early adopter. We get to figure out wheel fitments and what fits.

**Mops@Nemesis** · 10-14-2017 05:45 PM

Originally Posted by yumsauce

Definitely dig the 19”s more. Tires are 255?

I agree. And those only weight like 22.8 pounds too.

Originally Posted by Joncoulson

My car is back on stocks gonna have BC FORGED make me a set for the b9 so I know they fit.

Sent from my iPhone using Tapatalk

Nice, I've personally run 8-10 sets of the BC, and ordered a couple of sets for others this week. RS5 and RS3.

**Joncoulson** · 10-14-2017 06:06 PM

Originally Posted by Mops@SupremePower

I agree. And those only weight like 22.8 pounds too.

Nice, I've personally run 8-10 sets of the BC, and ordered a couple of sets for others this week. RS5 and RS3.

Nice!!!

Sent from my iPhone using Tapatalk

**Joncoulson** · 10-18-2017 09:10 PM

Ok so help me out here car is dropped on ED Emmotion suspension having BC FORGED make a set of wheels for it what specs should I get and what size tire I don’t want it too aggressive wanna be able to put 4 people in and roll out with no rubbing.

Sent from my iPhone using Tapatalk