OEM brake upgrade for 3.0T?

[DJSAV]

I don’t know about an 07 , the calipers require the 347mm rotors so if those are what you have then it is a direct bolt on.

But I tough your fronts are Front rotors 320mm so the Q5 / Macan upgrade won’t fit. The S6 are a straight swap as far as I know though.


Sent from my iPhone using Tapatalk

Could I not just get the 347mm rotors and then this set up will work? Also do you need the Q5 lines or will the A6 C6 lines work on these calipers? Thanks.

[DC Dawg]

Could I not just get the 347mm rotors and then this set up will work? Also do you need the Q5 lines or will the A6 C6 lines work on these calipers? Thanks.

You need the Q5 lines. I don’t know if you can mount the 347 or not, the issue is your spindles are different from the 3.0T so I don’t know if the calipers will bolt on correctly.


Sent from my iPhone using Tapatalk