Jzwecker_s4 2013 Audi S4 (6MT) Build Thread

[wtrsxn]

love the wheels and the ride height, but the ecs front lip and those side grille eyelids look odd to me.

[S4NOWHT]

Amazing looking car!

[jzwecker_s4]

Thanks man really appreciate it!

- - - Updated - - -

Amazing looking car!

Thanks man really appreciate it!

- - - Updated - - -

Amazing looking car!

Thank you!!

[jzwecker_s4]

Some updated photos of the most recent and up to date build:

[jonjohn718]

Great looking car!!!

[Dnovakovic04]

Those pictures are incredible....


Sent from my iPhone using Tapatalk

[jzwecker_s4]

Sorry I have not updated this thread in some time, here are some updated most recent pictures of the build shot by @Zuumy












Sent from my iPhone using Audizine

[wilazn]

Sorry I have not updated this thread in some time, here are some updated most recent pictures of the build shot by @Zuumy












Sent from my iPhone using Audizine

Nice I know that spot! It's in LIC.

Sent from my Nexus 5X using Tapatalk

[Glad22]

Perfection!! Looks real good!

[Lensch09]

Blown up a clutch yet?

-DL

[jzwecker_s4]

Blown up a clutch yet?

-DL

I have upgraded the clutch but this was not due to a blown clutch by any means, At wide open throttle the stock clutch would sometimes slip.

[jzwecker_s4]

Will be submitting the 4 photos below to the Audizine calendar contest for 2018. These photos are shot by photographer Vlad Shurigan AKA @Zuumy. Let me know your thoughts and if one should be selected...










Sent from my iPhone using Audizine

[Dnovakovic04]

Will be submitting the 4 photos below to the Audizine calendar contest for 2018. These photos are shot by photographer Vlad Shurigan AKA @Zuumy. Let me know your thoughts and if one should be selected...










Sent from my iPhone using Audizine

That second one is badass! That’s my vote.


Sent from my iPhone using Tapatalk

[Krusty]

Just installed the ECS Tuning carbon front lip and I am absolutely in love with the aggressiveness of the front end. Exactly what I was looking for!!

What did you do with the old one? What was it?

[fmzip]

This is the pic!

Your car is perfect. Love white, making me wish I picked white instead of black

[austineikenes]

those rohannas are awesome! sick car all around


Sent from my iPod touch using Audizine

[sacandagaD]

That second one is badass! That’s my vote.


Sent from my iPhone using Tapatalk

Totally agree second pic. Great looking car!

[NAR Mike]

S4 looks awesome man, always been a fan. Question, where did you get that fog light honeycomb mesh? I'm looking to do the same with my fogs.

Thanks

[jzwecker_s4]

S4 looks awesome man, always been a fan. Question, where did you get that fog light honeycomb mesh? I'm looking to do the same with my fogs.

Thanks

So, those were actually completely custom made by someone that I know. Since there was too much work involved he doesnt want to take on the project again :(. I have already had a ton of people wanting to do it.

[fstr n u]

I just noticed the black roof line....i'll definitely be checking into a graphics package for the front lip spoiler, roof line and eventually a small lip spoiler like yours for my Glacier White S4....sweet ride!

[parimal]

Where did you get the canards that fit around the lower grille? Thanks!


Sent from my iPhone using Audizine

[socrates42]

question on the clutch and flywheel, what are your thoughts on how "Wife/GF" friendly the clutch is?

[Pjacobs4]

Where did you get the canards that fit around the lower grille? Thanks!


Sent from my iPhone using Audizine

You can find those on ECS if you're talking about the carbon fog surroundings.

[parimal]

You can find those on ECS if you're talking about the carbon fog surroundings.

Thanks! Saw them. $350 though


Sent from my iPhone using Tapatalk

[jzwecker_s4]

Rolloface 8 Piston BBK to be installed soon!








Sent from my iPhone using Audizine

[jzwecker_s4]

Here is an updated Modification List:

Cosmetic:
- ECS Tuning Carbon Fiber Front Lip
- ECS Tuning Carbon Fiber Rear Diffuser
- ECS Tuning Carbon Fiber Fog Light Carnards
- Enlaes Rear Decklid Spoiler (Currently Out of Business)
- XenonZ UK RS Style Grille with QUATTRO Badge
- Custom Gloss Black Fog Light Delete Grilles Made By Swoops
- Gloss Black Vinyl Roof Wrap
- OneEighty NYC Satin Black Headlight Housing with Ibis White Around the LED
- Blackout Trim & Badges with Carbon Fiber Audi Rings & Graphite Front Rings
- Ruby Red Tail Light Overlays from GRFXP
- 20% Tint; 50% Front Windshield Tint
- ECS Tuning Carbon Fiber Engine Cover
- Audi R8 Oil Cap; Porsche 911 Coolant Cap
- Carbon Fiber License Plate Frame
- Ceramic Pro 9H & Topcoat of Ceramic Pro Light

Interior:
- P3 Cars Digital Vent Boost Gauge
- Ocarbon Carbon Fiber Trim Kit
- S4 Puddle Lights
- Custom Embroidered Floor Mats
- Black Forest industries Alcantara Shift Boot & Shift Knob

Wheels & Brakes:
- Rohana RFX10 20X10 ET 45 Brushed Titanium
- Michelin Pilot Sport 4S 265/30/20
- Stoptech Drilled/Slotted Rotors
- Akebono Ceramic Brake Pads
- Stainless Steel Brake Lines
- MRG Titanium Stud Conversion

Performance:
- ECS Tuning Kohlefaser Luft-Technik Intake System
- AWE Tuning Non Resonated Downpipes, Touring Exhaust; 102MM Diamond Black Tips
- KW Variant One Coilovers
- Eurocode USS Front & Rear Sway Bars
- Eurocode Billet Aluminum Transmission Mount
- Eurocode Front & Rear Differential Mount
- Eurocode Front & Rear Endlinks
- Eurocode Alu Kreuz Drivetrain Stabilizer
- Eurocode Stage Three Clutch & Lightweight Flywheel
- GIAC Stage Two Tune with Supercharger Pulley.

[KRp220]

Here is a little preview of the updates I have done over the course of a few months on the car...

Appearance:
- OEM Audi Sideskirts
- Carbon Fiber Carnards
- Windshield Wiper Delete

Wheels & Tires:
- Rohana RFX10 20x10 ET45
- 265/30/20 Michelin PS4S
- 3MM spacer all around

fitment is on point. do you have any rubbing? fenders rolled? any other issues?

[SkyparkPT]

Awesome build man! I've got quite some ways to go...Just curious also on the drop you were able to get away with on the V1's (when you were running AG)? I've got the same wheel/tire setup, but I think ordering a set of springs would be too low. Keep up the great work!

[jzwecker_s4]

fitment is on point. do you have any rubbing? fenders rolled? any other issues?

I have no issues at all but yes the fenders in the front have been rolled and the lining in the back has been cut.

[jzwecker_s4]

Awesome build man! I've got quite some ways to go...Just curious also on the drop you were able to get away with on the V1's (when you were running AG)? I've got the same wheel/tire setup, but I think ordering a set of springs would be too low. Keep up the great work!

Thank you I appreciate it. the drop has been the same height ever since I lowered the car on the V1s so honestly with all of my wheel setups I have never adjusted the height. It has been perfect each and every time!

[fmzip]

You're car is bliss! Still can't believe it didn't make the calendar.

Where did you get your grille?

[jzwecker_s4]

You're car is bliss! Still can't believe it didn't make the calendar.

Where did you get your grille?

What’s up man, I appreciate the love, maybe next year. The grille is from XenonZ UK but I believe they stopped selling it! :(


Sent from my iPhone using Audizine

[stereojorge]

You're car is bliss! Still can't believe it didn't make the calendar.

Where did you get your grille?

What’s up man, I appreciate the love, maybe next year. The grille is from XenonZ UK but I believe they stopped selling it! :(


Sent from my iPhone using Audizine

Have no fear! Here ya go @fmzip! https://www.ebay.com/itm/RS-Style-Gr...item46663555ce


@jzwecker_s4 Miss you in Tampa bruh!

[jzwecker_s4]

Hope all is going well! I appreciate everyone who follows my build thread. The reason why I have not posted on here in so long is because of the lack of being able to using the Audizine mobile app to be able to upload images to the thread. It is way way too much of a hassle to not be able to post photos with this app. If anybody has an easy solution to this it would be incredible! I’d love to keep this thread going. Thank you


Sent from my iPhone using Audizine

[alexdell]

Hope all is going well! I appreciate everyone who follows my build thread. The reason why I have not posted on here in so long is because of the lack of being able to using the Audizine mobile app to be able to upload images to the thread. It is way way too much of a hassle to not be able to post photos with this app. If anybody has an easy solution to this it would be incredible! I’d love to keep this thread going. Thank you


Sent from my iPhone using Audizine

Hey Man. Love following your build. Try using the Tapatalk app instead of the Audizine app. Tapatalk lets you upload pics directly without using an external hosting site. I haven't tried in a while but at least it used to. Alternatively, you can upload your pics to a pic hosting site like imgur and link it directly here but that's more of a pain. Try Tapatalk first.

[cgnorthstar]

I probably missed it, but what are you lowered on?

[undroath73]

Still have the Quattro grille from Xenonz? If you want to sell it lmk! Love the car btw!

[jzwecker_s4]

I probably missed it, but what are you lowered on?

I am lowered on KW V1 but I am changing it up in the near future! Stay tuned to my Instagram @jzwecker_s4 and you will see!!


Sent from my iPhone using Audizine

[jzwecker_s4]

Still have the Quattro grille from Xenonz? If you want to sell it lmk! Love the car btw!

Thanks so much! Sorry I am keeping that grille!


Sent from my iPhone using Audizine

[jzwecker_s4]

Good morning everyone! I just wanted to take this time and let everyone know that I have been selling Black badges for some time now! I have full S4 Kits and supercharged badges. Send me a PM on here or on my instagram @jzwecker_s4