LED headlights...

[2008A4SLine]

Does anybody recommend replacement LED bulbs for the both high and low beam on a 2008 B7? What about a yellow bulb for the fog lights? I'm new to the forum so sorry if these questions have been asked a million times.

[Deckster]

What headlights do you have?


Sent from my iPhone using Tapatalk

[2008A4SLine]

What headlights do you have?


Sent from my iPhone using Tapatalk

Standard yellow halogen


Sent from my iPad using Audizine

[KMAzz]

Led bulbs are not designed for halogen housings. You'll blind oncoming drivers.

[Dondbg]

Led bulbs are not designed for halogen housings. You'll blind oncoming drivers.

Hmmm have you swapped your xenon with LED ?


Sent from my iPhone using Tapatalk

[KMAzz]

Hmmm have you swapped your xenon with LED ?


Sent from my iPhone using Tapatalk

Nope LED are junk in most housings/ projectors. I have retrofitted my lights with better projectors and lens.

[2008A4SLine]

Hmmm have you swapped your xenon with LED ?


Sent from my iPhone using Tapatalk

I haven't done anything. I don't think they're xenon. These are just yellow, dull halogen


Sent from my iPad using Audizine

[dalmation53]

Led bulbs are not designed for halogen housings. You'll blind oncoming drivers.

I run hids on halogens but i adjusted the beam more down and i people have never flickered their lights at me as if they were being blinded haha

Sent from my SM-G925T using Tapatalk

[vce1232000]

Most people that want headlites into oem Bi-Xenons with kufftec harness and vcds coding

[Evan1028]

Don't do it for low beams if you have projector lenses, the reflectors just don't shine the light properly and it is sooooo bad, I did it and it is just terrible. High beams however are the shiz! They are bright as hell and you won't blind anyone because highs are for when there is no oncoming traffic. All that said I have LED's in my low/high/fogs in my GMC Canyon because I don't care, trucks always blind people anyway so I may as well do it in style LOL


Sent from my iPhone using Audizine

[2008A4SLine]

Don't do it for low beams if you have projector lenses, the reflectors just don't shine the light properly and it is sooooo bad, I did it and it is just terrible. High beams however are the shiz! They are bright as hell and you won't blind anyone because highs are for when there is no oncoming traffic. All that said I have LED's in my low/high/fogs in my GMC Canyon because I don't care, trucks always blind people anyway so I may as well do it in style LOL


Sent from my iPhone using Audizine

Oh, you're one of those people blinding me everyday. Lol


Sent from my iPad using Audizine

[Evan1028]

Oh, you're one of those people blinding me everyday. Lol


Sent from my iPad using Audizine

Doubt it considering I only really drive my truck in the winter and during the day LOL My B6 needs inspected so I have been in my truck lately but save for the occasionial late night run to Lowes to pick up lumber or whatever, I dont even run that thing with lights on. Plus I live in a very rural farm area with minimal opposing traffic at night.

[Evan1028]

And if you are looking for a solid quality brand I have used several but nighteye are a great product


Sent from my iPhone using Audizine

[wjg22]

I bought used OEM bi-xenons and its probably my favorite cosmetic "mod," save for maybe coilovers. Really brings the front end into this decade and worth every penny.

Edit: I did, however, swap out the DRLs and City lights with LEDs

[Okedokey]

Why would LED in halogen be any more blinding than halogen lamps??

[Evan1028]

Why would LED in halogen be any more blinding than halogen lamps??

They really aren't i just feel the luminosity is a higher rating than a standard halogen bulb but when people see "blue" light they just assume it is so much brighter and flash you regardless of xenon or LED.

[vvenom800tt]

LEDs are made for halogen light. As they work well with the reflector.

Nothing beats the oem bixenons though.

[2008A4SLine]

LEDs are made for halogen light. As they work well with the reflector.

Nothing beats the oem bixenons though.

I think I'm just going to get some SilverStars and go with those.


Sent from my iPhone using Audizine

[vce1232000]

I got 2 sets of leds ed in my service van. H13 hi-lo in the headlamps and H11s in the fog lites. I can everything @ nite...........

[Evan1028]

I got 2 sets of leds ed in my service van. H13 hi-lo in the headlamps and H11s in the fog lites. I can everything @ nite...........

!
That is how I feel with my truck. It really is the most amazing thing, dare I say "night and day" difference LOL! But for real, it is absolutely incredible how much light you get from them in a standard reflector headlight. I can see dear crossing the road 10 miles out

[vvenom800tt]

I think I'm just going to get some SilverStars and go with those.


Sent from my iPhone using Audizine

Either thar or save up for some oem bixenons

[vce1232000]

save up for some oem bixenons

choice imo. You can get a pair of oem bi-xenon on the cheap these days. Its not like 3 or 4 years ago

[KMAzz]

LEDs are made for halogen light. As they work well with the reflector.

Nothing beats the oem bixenons though.

They are not actually. A halogen bulb is omnidirectional where LED aftermarket are not. Typically a plug and play LED kit does not have the range of a halogen bulb in a reflector housing. You normally only get a brighter close range light. If you want a bright light with the proper output either go with OEM HID housings or do a HID projector retrofit or LED projector retrofit.

[Brillo]

They are not actually. A halogen bulb is omnidirectional where LED aftermarket are not. Typically a plug and play LED kit does not have the range of a halogen bulb in a reflector housing. You normally only get a brighter close range light. If you want a bright light with the proper output either go with OEM HID housings or do a HID projector retrofit or LED projector retrofit.

This is excellent advice.

[vce1232000]

Its hard to get good range out of an LED bulb.

Typically a plug and play LED kit does not have the range of a halogen bulb in a reflector housing. You normally only get a brighter close range light.

This is not actually true anymore. I would agree to this with the 1st generation led's. But we are currently is the 3rd generation led's. These have the range and longevity. Even car manufacturers have leds in non projector housings now. The newest technology out is laser emitting headlites now.

[Evan1028]

They are not actually. A halogen bulb is omnidirectional where LED aftermarket are not. Typically a plug and play LED kit does not have the range of a halogen bulb in a reflector housing. You normally only get a brighter close range light. If you want a bright light with the proper output either go with OEM HID housings or do a HID projector retrofit or LED projector retrofit.

I disagree but only if you don't get a quality set of bulbs. I swear by these bulbs by Nighteye they are so much better than my stock halogens in my truck and insane as my high beams on my B6. The crazy thing is they aren't even 360 degrees of light, just two sides and it is incredible! Definitely projects far, focused, and bright!

IMG_2835.JPG




Sent from my iPhone using Audizine

[vce1232000]

I disagree but only if you don't get a quality set of bulbs. I swear by these bulbs by Nighteye they are so much better than my stock halogens in my truck and insane as my high beams on my B6. The crazy thing is they aren't even 360 degrees of light, just two sides and it is incredible! Definitely projects far, focused, and bright!

IMG_2835.JPG

These are what I use. 360 lite output. I also have them ed in my MK1 GTI via H4 headlite conversion kit. Brite as . Makes it like daylite @ midnite

[2008A4SLine]

These are what I use. 360 lite output. I also have them ed in my MK1 GTI via H4 headlite conversion kit. Brite as . Makes it like daylite @ midnite

Will these fit the stock halogen headlight assemblies? Do I have to change wiring, or can I use the existing connectors?

[oVeRdOsE]

They are not actually. A halogen bulb is omnidirectional where LED aftermarket are not. Typically a plug and play LED kit does not have the range of a halogen bulb in a reflector housing. You normally only get a brighter close range light. If you want a bright light with the proper output either go with OEM HID housings or do a HID projector retrofit or LED projector retrofit.

it's all about lens and light diffusion physics. There is nothing to do with light type. It is really possible to design LED that will fit in our cars and respect the OEM light emission pattern. Is there already a kit out for B7s? I don't know.

But it's not impossible to find kits for mk5, mk6, nissans, toyota, etc.

many early 2000 cars, had hid with standard reflectors.

This as been said, if the light is not tested or designed to repect the original light pattern, I won't use it, I might cause issues with visibility for the driver or others.

[vvenom800tt]

Its hard to get good range out of an LED bulb.

I wouldve just gone with OEM bixenons or ecodes or something. By the time youd done a retrofit you couldve just bought a used set of bixenons.

[$teady$upreme]

So the latest led can project and shine far enough? I want it bright but also shine far enough.

Or hid still shines farther?


Sent from my iPhone using Audizine

[Evan1028]

If I think of it or have time tomorrow night I can try to snap some pictures of my B6 with my LED fogs and highs as well as my OEM xenon lows.

[2008A4SLine]

Thinking of getting these...Has anyone tried these?

http://m.ebay.com/itm/Built-In-HID-L...257Ciid%253A17


Sent from my iPhone using Audizine

[vce1232000]

A option imo http://www.audizine.com/forum/showth...Check-them-out!

[Evan1028]

Thinking of getting these...Has anyone tried these?

http://m.ebay.com/itm/Built-In-HID-L...257Ciid%253A17


Sent from my iPhone using Audizine

OEM is going to provide the best source of light as far as reflectors go. I have never had any luck with aftermarket projectors. I am telling you, try the $30 on LED low beams and see if you want to just upgrade your bulbs. Simple upgrade and install, incredible light output for your lights (halogen reflectors only) and they are just cool since they are instant on. Sure the aesthetics are there with some aftermarket lights but you will get irritated with them due to low light output from the projector lenses or get moisture in the light at some point and then you can thank me for steering you on the right path LOL. But for real, both aftermarket lights "LOOK" pretty nice. I just know in my many headlight swaps, aftermarkets suck for some reason, and you will find out the reason eventually. OEM headlight units are top notch quality. I am about to start a GoFundMe to raise money for these $30 bulbs so you can see how amazing they are LOL

[vce1232000]

they are instant on.

2nd features of led's

[2008A4SLine]

OEM is going to provide the best source of light as far as reflectors go. I have never had any luck with aftermarket projectors. I am telling you, try the $30 on LED low beams and see if you want to just upgrade your bulbs. Simple upgrade and install, incredible light output for your lights (halogen reflectors only) and they are just cool since they are instant on. Sure the aesthetics are there with some aftermarket lights but you will get irritated with them due to low light output from the projector lenses or get moisture in the light at some point and then you can thank me for steering you on the right path LOL. But for real, both aftermarket lights "LOOK" pretty nice. I just know in my many headlight swaps, aftermarkets suck for some reason, and you will find out the reason eventually. OEM headlight units are top notch quality. I am about to start a GoFundMe to raise money for these $30 bulbs so you can see how amazing they are LOL

Dude that's messed up...

[Evan1028]

Dude that's messed up...

Hey this is a community and we look after our own!

[2008A4SLine]

Hey this is a community and we look after our own!

I pulled the trigger on these tonight.

https://www.amazon.com/NIGHTEYE-Head...ds=nighteye+h7

[Evan1028]

I feel like this has thread has been hijacked but it has also been quite informative, anyone have any pictures of your LED bulb setup and light output? I will take pictures of mine this weekend and post up. Maybe even a quick video clip but I have no idea how to post videos to here LOL