034 Motorsports Engine Mounts? (2.0T specific, 50durometer)

[johnnySV]

I'm looking for testimonial of owners who've installed the 50durometer variant of the 034 Motorsports Engine Mounts.

This softer rubber was an evolution from the 65durometer which apparently works well on the 3.0T but increases NVH on the 2.0T. I'm hoping that the 50durometer produces not more than OEM levels of NVH at both idle and speed conditions.

I have a failed OEM mount (leaking fluid at 50,000miles) and need a replacement so Im considering going this way. Thanks in advance !!


Sent from my iPhone using Tapatalk

[034Motorsport]

Thank you for the interest in our Density Line Performance Engine Mounts for B8 Audi A4 2.0 TFSI! We engineered these mounts as a more street-friendly alternative to the 65 Durometer mounts for 4-cylinder cars. While the reviews have been much more positive from A4/A5 2.0 TFSI owners, they still do introduce some additional vibration into the cabin.

NVH transfer will be more noticeable if you are running a single-mass flywheel or solid/lightweight crank pulley, and in general on Tiptronic-transmission equipped models.

You can see feedback from other Audizine Members on the 50 Durometer versions here, which may help you decide whether or not they are the right upgrade for you: http://www.audizine.com/forum/showth...i-A4-2-0-TFSI/

Feel free to send me a PM or email if you have any other questions!

- Bradd@034