Audizine - An Automotive Enthusiast Community

Page 2 of 3 FirstFirst 123 LastLast
Results 41 to 80 of 90
  1. #41
    Senior Member Three Rings
    Join Date
    Oct 09 2014
    AZ Member #
    287876
    Location
    Norway

    Guest-only advertisement. Register or Log In now!
    Quote Originally Posted by brock2428 View Post
    So I can get the full rpm in a pull
    They won't go over 200kpm on a dyno


    -brock
    aha
    Do you need the gear ratios to get them on the dyno chart?
    From what ive figured it should be
    1: 3.667
    2: 2.053
    3: 1.423
    4: 1.065
    5: 0.853
    6: 0.730 (6-Spd)
    Final Drive: 3.89:1
    [ B7 2.0TFSI Avant Quattro 07 ] [ Maestro tuned ] [ EFR 6758 .80 TS SP QSV ] [ S3 injectors ] [ Autotech HPFP ] [ ER FMIC ] [ Neuspeed Catback ] [ ARD V-Band Manifold ] [ TTRS LPFP + Torqbyte PM3 + CM5-LT ] - Build Thread

  2. #42
    Active Member Two Rings Irufushi's Avatar
    Join Date
    Jul 29 2013
    AZ Member #
    119899
    My Garage
    A4 B7 2.0T quattro S-Line
    Location
    Moscow

    268hp = k03 stage 2+

    Why 268hp on TD05?

  3. #43
    Active Member Two Rings Irufushi's Avatar
    Join Date
    Jul 29 2013
    AZ Member #
    119899
    My Garage
    A4 B7 2.0T quattro S-Line
    Location
    Moscow

    What gearbox is installed and what is done?

  4. #44
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by Irufushi View Post
    268hp = k03 stage 2+

    Why 268hp on TD05?
    I'm thinking The dyno wasn't set up correctly


    -brock

  5. #45
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by al3k View Post
    aha
    Do you need the gear ratios to get them on the dyno chart?
    From what ive figured it should be
    1: 3.667
    2: 2.053
    3: 1.423
    4: 1.065
    5: 0.853
    6: 0.730 (6-Spd)
    Final Drive: 3.89:1
    Na it didn't give me any gear ratios on the chart

    Thanks for showing this to be tho


    -brock

  6. #46
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by Undercut View Post
    I'm looking at this kit myself in the next few weeks. Love to see some numbers!


    Sent from my iPhone using Audizine
    Hey buddy theses numbers are real low the dyno wasn't set up correctly and the car was really bad heat soaked
    I'm setting up another dyno day with my mate at a different shop
    This time the guy will let it fill down after each run and spray the intercooler with water


    -brock

  7. #47
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    UPDATE


    Just had this box of jhm goodness arrive
    Will install in the next few days


    -brock

  8. #48
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Any chance this thing will be back on the dyno?

  9. #49
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by yxri View Post
    Any chance this thing will be back on the dyno?
    Definitely
    Trying to organise another day.
    This time I'll try a different shop.


    How's your build going


    -brock

  10. #50
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Custom catch can is currently on its way. I'm looking to go down to the track in a couple weeks to see what times I can pull with a basic APR stage 1 tune.

  11. #51
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by yxri View Post
    Custom catch can is currently on its way. I'm looking to go down to the track in a couple weeks to see what times I can pull with a basic APR stage 1 tune.
    Nice
    I went with the stage 2 034 catch can

    I'm yet to go to the track
    It's a 3 hour drive but I'm sure it would be worth the fun.


    -brock

  12. #52
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Lol thats quite a ways. Any street races? Wondering what the little audi can do against some of the other cars around your area?

  13. #53
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Yeah had a few
    Raced a couple of v8s and they just get away on the top End
    Beat a few skylines and Subarus

    Launch assist surprised a lot of people lol


    -brock

  14. #54
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Quote Originally Posted by brock2428 View Post
    Yeah had a few
    Raced a couple of v8s and they just get away on the top End
    Beat a few skylines and Subarus

    Launch assist surprised a lot of people lol


    -brock

    If you get a chance, Can you take a video of the launch assist? Also does your exhaust include muffers or a resonator?

  15. #55
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Yeah my exhaust is a jhm hfc - jhm down pipe but I had my exhaust shop make a custom one back form the bottom of the down pipe which has 2 12 inch resonators then to jhm quad tips

    I may change to 18" resonators


    -brock

  16. #56
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    And I can't figure out how to post a video lol


    -brock

  17. #57
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Thanks for the info. How loud is it? I'm just running open down pipe with a resonator. Just post the video on youtube and link it here on the forums.

  18. #58
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Ok I'll try and work that out

    It's pretty Loud
    But Iv added some dynamat to help with that


    -brock

  19. #59
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    OK thanks a lot! Interested in seeing a cold start as well as the launch control.

  20. #60
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by yxri View Post
    OK thanks a lot! Interested in seeing a cold start as well as the launch control.
    Do you have fb I can send you some videos on there may be waster that way


    -brock

  21. #61
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Did dru@jhms air box mod today
    Got rid of that apr carbino system (for sale if any one is interested)

    Loving the stealth look


    -brock

  22. #62
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Man I wished installed the mounts and shift a long time ago completely changes the driving experience


    -brock

  23. #63
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Just picked theses up ! Can't wait to get them sprayed and installed!

    Also sprayed my cooler black and did the grille
    Love the results


    -brock

  24. #64
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Sprayed my s4 b8 brakes
    Really happy with the out come can't wait to get theses on and see the difference


    -brock

  25. #65
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Time for a track day


    -brock

  26. #66
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Sent my trim in for some carbon fibre treatment
    Matt at Ocarbon did a amazing job
    IMG_0337.jpgIMG_0331.jpgIMG_0333.jpgIMG_0336.jpg

    Now itís time to get the rest of my brake kit sorted


    Sent from my iPhone using Tapatalk

  27. #67
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Little update

    Weather is cooling down in Aus
    20000km service is coming up
    Going to do
    cam follower
    spark plugs
    Install my b8 s4 brakes
    Fine tune my short shifter
    Some new oil and filter always use motul 5w 40

    Hopefully get a updated tune..

    Go down to the track and see what times I can get !


    Sent from my iPad using Tapatalk

  28. #68
    Established Member Four Rings yxri's Avatar
    Join Date
    Dec 27 2016
    AZ Member #
    389199
    My Garage
    Ford Lighting
    Location
    Ohio

    Updated Tune??

  29. #69
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by yxri View Post
    Updated Tune??
    Nothing crazy
    Just a higher rev tune!
    And maybe the race fuel tune
    I do have a 20l tank of 110 in my shed !!

    Although the brakes have been put aside for now something better coming along


    Sent from my iPhone using Tapatalk

  30. #70
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    AUSTRALIAN JHM STAGE 3 build

    UPDATE

    Some new parts arriving ! The build is now going on another direction

    Ie rods
    Cp pistons (83 mm)- tool steel wrist pins


    Mahle race race rod bearings
    Mahle race main bearings
    Arp head studs
    Ie crank bolt
    Fluidamper crank pully
    Aem water meth kit
    Jhm 340 log fuel pump
    Brand new 2.0t oil pump



    Sent from my iPhone using Tapatalk
    Last edited by brock2428; 05-11-2018 at 04:24 AM.

  31. #71
    Established Member Four Rings funkypterodacty's Avatar
    Join Date
    Apr 30 2017
    AZ Member #
    398712
    Location
    Los Angeles

    Very nice choice of parts, didn't know cp made pistons for our engine. Would you mind linking ?

    Also, did you get your rods rifle drilled ?

  32. #72
    Veteran Member Four Rings Denio24's Avatar
    Join Date
    Jan 23 2013
    AZ Member #
    108156
    Location
    Chicago

    these are the ones I got for my build. I also had mine coated at swain-tech.

    https://www.amazon.com/CP-Pistons-SC.../dp/B00BQT8CYK
    Garage: 2008 Quartz Gray Audi A4Q 6MT
    Tuning: JHM Tuned Stage 2 93 Octane w/ IE HPFP

  33. #73
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by funkypterodacty View Post
    Very nice choice of parts, didn't know cp made pistons for our engine. Would you mind linking ?

    Also, did you get your rods rifle drilled ?
    Hey mate I got my tuner/engine builder to order the pistons for me. As it was his recommendation to get them
    But I believe he got them from pagpartsturbo? I think

    I didnít go for rifle drilling as per his recommendation as well



    Sent from my iPhone using Tapatalk

  34. #74
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Possibly the most important part arrived !
    Brand new 2.0t oil pump
    Thanks dru from jhm for the hook up IMG_0313.jpg


    Sent from my iPhone using Audizine

  35. #75
    Established Member Four Rings funkypterodacty's Avatar
    Join Date
    Apr 30 2017
    AZ Member #
    398712
    Location
    Los Angeles

    Quote Originally Posted by brock2428 View Post

    I didnít go for rifle drilling as per his recommendation as well


    Curious as to why that is ?

  36. #76
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by funkypterodacty View Post
    Curious as to why that is ?
    He told me that it will weaken the rods in the long run



    Sent from my iPhone using Audizine

  37. #77
    Veteran Member Four Rings Denio24's Avatar
    Join Date
    Jan 23 2013
    AZ Member #
    108156
    Location
    Chicago

    Cut those balance shaft gears out and get a fluidampr.
    Garage: 2008 Quartz Gray Audi A4Q 6MT
    Tuning: JHM Tuned Stage 2 93 Octane w/ IE HPFP

  38. #78
    Established Member Three Rings brock2428's Avatar
    Join Date
    May 24 2017
    AZ Member #
    399960
    Location
    Australia

    Quote Originally Posted by Denio24 View Post
    Cut those balance shaft gears out and get a fluidampr.
    I got a fluidamper


    Sent from my iPhone using Audizine

  39. #79
    Veteran Member Four Rings canadianA4B7's Avatar
    Join Date
    Feb 10 2012
    AZ Member #
    87997
    My Garage
    parts
    Location
    Napanee, ON

    Quote Originally Posted by Denio24 View Post
    Cut those balance shaft gears out, balance your rotating assembly and get a fluidampr.
    Corrected that for you.

  40. #80
    Veteran Member Four Rings Denio24's Avatar
    Join Date
    Jan 23 2013
    AZ Member #
    108156
    Location
    Chicago

    Ie rods come balanced, and the crank is already balanced!!! Though i guess one can do it if the paranoia is too much lol....edit, forgot the flywheel.

    Sent from my SM-G920P using Tapatalk
    Garage: 2008 Quartz Gray Audi A4Q 6MT
    Tuning: JHM Tuned Stage 2 93 Octane w/ IE HPFP

Page 2 of 3 FirstFirst 123 LastLast


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.