19x10 Rotiform IND-T Polished Copper Finish w/ Clear Coat 5x112 et35

[lancejay83]

19' Rotiform IND-T Polished Copper Finish Wheels 19x10 Et35 5x112
Up for sale is a set of Rotiform IND-T wheels with a custom finish.. All four wheels are the same and have the following measurements:
19x10 all the way around(19' diameter and 10'wide)
Offset +35
Hub Bore 66.5
These wheels have a polished copper custom finish with clear coat.

I had the wheels on my 2005 Audi S4 for the spring and summer season putting 5,000 miles or less on them. They are in great condition still with a few minor flaws which I have posted pictures of. One wheel has a small nick on the outer lip from the tires being mounted. The nick is probably an eight of an inch, not big at all. Then the two wheels I had on the rear have some scraping to the inner lip of the barrels from rubbing my strut guards when I dropped in and out of my driveway. My car is lowered to the ground and with this aggressive fitment, I added 5mm spacers to keep this from happening more. Anyone planning to run these wheels and are lowered will probably experience similar issues. Doesnt affect the outer appearance or performance of the wheels whatsoever.

The current tires on the wheels are Nankang NS-20 225/35/19. They are rather worn on the inside because of my excessive camber and bad alignment. I will be removing the tires for sale unless someone close by buys the wheels and can pick them up. Leaving the tires on will inflate shipping costs. With the condition the tires are in, it's not worth the extra money. Plus they are cheap tires to begin with. I would recommend getting the wheels rebalanced after tires are mounted.

I am going to cross list these wheels on vwvortex, audizine, ebay and instagram.

These wheels cost me $1900 plus shipping brand new on year ago. I am willing to include the 66.5 to 57.1 hub rings I used for free. Because they are used and have a couple flaws, I will start the price off at $1550.

They will ship UPS or FedEx depending on the location of the buyer.

If you would like more information, pictures of fitment questions just let me know and I'd be glad to assist you to the best of my ability

Price $1400 Shipped

[lancejay83]

Bump

[krahezS4]

Gorgeous setup man. Glws!


Sent from my iPhone using Audizine

[lancejay83]

Thank you

[RabidSavant]

Shipping from where?


Sent from my iPhone using Audizine

[lancejay83]

Kokomo, IN

[lancejay83]

Bump

[lancejay83]

$1500 shipped

[lancejay83]

Someone buy these wheels or send me an offer

[se.farrell]

Sent a PM.

[lancejay83]

Responded

[lancejay83]

Bump

[lancejay83]

Bump

[lancejay83]

Bump

[lancejay83]

$1450 free shipping anywhere in the 🇺🇸!!
FINAL PRICE DROP

[lancejay83]

Still for sale

[lancejay83]

$1400 free shipping anywhere in the 🇺🇸

[bjaroch]

I could be interested in these in a couple weeks

[krahezS4]

Don't know if these are still up but I may have some cash for them soon


Sent from my iPhone using Audizine

[Der Typ]

Would you be willing to meet somewhere? I am in Michigan and would be willing to meet you somewhere to save on shipping.

Thanks!

[lancejay83]

How far are you from Kokomo Indiana

[Der Typ]

Sorry buddy, calculated the size again and rims are too wide. Can't do it on my setup.

[Der Typ]

Well...maybe you have an idea on the fitment...

I am looking to run a new set of wheels on a 2012 Mk6 Golf R. My current wheel fitment is 18x7.5 ET 51 with 10mm spacers and I like how that looks. But I don't like the stock Talladega wheels.
I found a website where you can enter your current wheel spec and the "new" one and it looks like it would not fit and just look bad.

Any input is appreciated.

Thanks!

[BMT62688]

PM sent