Rear-view camera not fullscreen

[Kubus]

In my 2017 Audi S3, my rear-view camera is not fullscreen. I do not have the parking sensors yet it displays an outline of my car on the right part of the screen leaving the camera display squished on the left part of the screen.

Do any of you experience the same thing or are you guys getting a fullscreen camera display?

Thanks!

[5l33P3R]

Don't know why they did this. Same with mine. My brother's 2016 is perfect. Actually very annoyed by this.

In fact, I feel the distortion makes me guess more just where the car really is. Worried I might curb a wheel etc.
Sent from my SAMSUNG-SGH-I337 using Audizine mobile app

[Kubus]

Pics for clicks.

Anything can be done in VCDS?


Sent from my iPhone using Audizine

[Kubus]

Can someone who has full screen camera post up their coding for their 6C - Back-up Cam controller? Ross tech hasn't released labels for that controller yet. Maybe there are programming differences between the 17's and older models that can be helpful.

My 2017 coding is as follows

0273010100002001000040



Sent from my iPhone using Audizine

[markn1689]

thats really odd.

what is the right portion of the screen for? seems useless

[o2_designs]

When I test drove a 17' few week ago, the car outline on the right was for the bumper sensors. But I didn't see them light up when backing up. I wasn't near anything when I backed up tho

[Kubus]

When I test drove a 17' few week ago, the car outline on the right was for the bumper sensors. But I didn't see them light up when backing up. I wasn't near anything when I backed up tho

My car doesn't have bumper sensors so that part of the screen is super useless.


Sent from my iPhone using Audizine

[JunkStory]

it does this on my 2017 S3 as well and super annoying... the right part of the screen should be much smaller and the camera view should become shorter so the aspect ratio is not squished.

[Kubus]

Anybody in here with VCDS that can pull the coding on their 2016 with full screen display?


Sent from my iPhone using Audizine

[5l33P3R]

Anybody in here with VCDS that can pull the coding on their 2016 with full screen display?


Sent from my iPhone using Audizine

Just grabbed a cable: I can do it, but need direction on how to/navigate to get it...

[Kubus]

Just grabbed a cable: I can do it, but need direction on how to/navigate to get it...

Thanks!

Once you're in, click on Select under the Select Control Module heading (top left option)
Then I think bottom right you should see 6C - Rear view camera, click on that
Once the next screen opens, click on Coding (bottom right part of the screen)

Once the next window pops up, you should see a number like 0273010100002001000040

Thats what Im looking for :)

Thanks again!

[5l33P3R]

You just want me to confirm coding? Then what? You'll be looking for an adaptation?

Sent from my SAMSUNG-SGH-I337 using Audizine mobile app

[Kubus]

You just want me to confirm coding? Then what? You'll be looking for an adaptation?

Sent from my SAMSUNG-SGH-I337 using Audizine mobile app

Yeah. I want to see how it was coded for yours. There are no labels in VCDS for mine currently which makes it rather difficult.


Sent from my iPhone using Audizine

[5l33P3R]

Thanks!

Once you're in, click on Select under the Select Control Module heading (top left option)
Then I think bottom right you should see 6C - Rear view camera, click on that
Once the next screen opens, click on Coding (bottom right part of the screen)

Once the next window pops up, you should see a number like 0273010100002001000040

Thats what Im looking for :)

Thanks again!

027300010201000300

[Kubus]

Tried and failed :(

Thanks though!

Maybe someone will be able to figure this out


Sent from my iPhone using Audizine

[ahfunaki]

Wow, that is really stupid...

[Mops@Nemesis]

Very annoyed by this...

@NPuter

[Karbon]

My car has the sensors. And they always flash regardless if your pulling in or backing up