2016 GIAC Holiday Sale!

[Connie@GIAC]

A minute faster is a minute more to spend with friends and family. Make it count. Happy holidays!

See where your local dealer is here: GIAC Authorized Dealers

[Lensch09]

Care to comment on availability for the B8.5 dual pulley files?

-DL

[Connie@GIAC]

We do not have an ETA on the B8.5 dual pulley file. However, all of our upcoming releases between 11/16-12/31 will be included in the sale.

[maty360414]

does the tune for the stage 2 is on 10% off if i already have the pulley?

[Connie@GIAC]

does the tune for the stage 2 is on 10% off if i already have the pulley?

The 10% applies if you are getting the stage 2 software from scratch, or upgrading from stage 1.

[gottlobfrege]

I just want to share what a great tune this is. I've run stage 2 for about 6 months now and couldn't be happier. I started with stage 1, which was great, especially at high revs. Stage 2 brings noticeable improvement lower in the range. In any case, for those who are on the fence, I absolutely recommend the GIAC tune.

[Rbb1485]

will any authorized GIAC tuner honor the 10% sale?

[KRS Aaron]

This still has to be done at an authorized dealer, right? I have a B8 and would rather just send in my ECU since I travel frequently.

[awwturbo]

Connie@GIAC: could you PM me the cost of the B8 dual pulley tune? Currently on GIAC stage 2. Thanks!

[Bruno_s4]

Connie@GIAC: could you PM me the cost of the B8 dual pulley tune? Currently on GIAC stage 2. Thanks!

I'll take that same information as well Connie Thx!

[Connie@GIAC]

I just want to share what a great tune this is. I've run stage 2 for about 6 months now and couldn't be happier. I started with stage 1, which was great, especially at high revs. Stage 2 brings noticeable improvement lower in the range. In any case, for those who are on the fence, I absolutely recommend the GIAC tune.

Thank you for your review! We're happy to know that you're enjoying it! :)

will any authorized GIAC tuner honor the 10% sale?

Most of them in the US will. It is the dealer's choice to participate in the sale or not, so give your dealer a call.

This still has to be done at an authorized dealer, right? I have a B8 and would rather just send in my ECU since I travel frequently.

You would need to visit a dealer for the TCU tune. Our closest dealer to Evanston is Perfect Power in Buffalo Grove. Dubwerks in Libertyville and Komet Motorsports in St. Charles are also nearby.

Connie@GIAC: could you PM me the cost of the B8 dual pulley tune? Currently on GIAC stage 2. Thanks!

I'll take that same information as well Connie Thx!

PM sent to both of you!

[fitzydude]

Could you PM me the cost of the stage 2 tune, looking for pump and race files. I plan on running it with my current dual pulley setup and a Chipwerke piggyback. I'm sure I have to buy a pulley which I'll resale.

Thanks Connie

[TSTARKZ]

Would you happen to have a official price for stage 2? Also could you confirm dealers in NYC that are participating?


Sent from my iPhone using Audizine

[Connie@GIAC]

Could you PM me the cost of the stage 2 tune, looking for pump and race files. I plan on running it with my current dual pulley setup and a Chipwerke piggyback. I'm sure I have to buy a pulley which I'll resale.

Thanks Connie

PM sent!

[Connie@GIAC]

Would you happen to have a official price for stage 2? Also could you confirm dealers in NYC that are participating?


Sent from my iPhone using Audizine

PM sent. We have various dealers in NY, but the one closest to NYC is Tyrolsport and they are participating in the sale.

[tars9]

Connie

Could you please send pm price of going dual pulley from stock? Also, is there an eta on e85 tune?

Thank you


Sent from my iPhone using Audizine mobile app

[Connie@GIAC]

Connie

Could you please send pm price of going dual pulley from stock? Also, is there an eta on e85 tune?

Thank you


Sent from my iPhone using Audizine mobile app

PM sent!

[jlaudio]

Can you confirm if streamline industries in Slc Utah is participating. I have an appointment with them Tuesday for other items but may go stage 2 if they honor.

[Connie@GIAC]

Can you confirm if streamline industries in Slc Utah is participating. I have an appointment with them Tuesday for other items but may go stage 2 if they honor.

They are. It is likely that 100% of our dealers in the US are participating in the sale.

[ChobeG]

I'll be happier if the tune for the CREC engine was released finally!

[Pyromatic177]

Could I get the price for stage 2 as well. Thanks

[Connie@GIAC]

Could I get the price for stage 2 as well. Thanks

PM sent!

[Connie@GIAC]

Start off 2017 a bit faster with a freshly tuned car! We're giving you guys until the last day of 2016 to take advantage of our sale!

[tcoshea]

I actually have my '15 scheduled for stage 2 ecu and transmission tuning next week. I was just checking out your new website (it's nice BTW) and noticed '15s aren't included. Am I going to run into a problem? I'm assuming I won't based on other posts, but I was curious why the website stops at 2014.

[sirsycott]

what's the difference between stage2 and stage 2 high rev?
applicable to b8.5?

already have the dsg tune, so wouldn't mind a free upgrade to squeeze that extra power out

[AmrS4]

Price for stage 2 without pulley since I already have one installed on the car with dsg flash? .

[eXpressRR]

Pm price for stage 2 for b8 S4?

[audis4culver]

I second this. stage 1 for about 6 months and yesterday got stage 2. OMG !!! This is absolutely insane. The torque at the low end rpm into higher rips your face off. Anyone debating doing st2 - dont wait, treat yourself to a holiday present. I dont give out many compliments or try to push a certain product but in this instance I just had to. The best money I've spent in a looooong time.

I just want to share what a great tune this is. I've run stage 2 for about 6 months now and couldn't be happier. I started with stage 1, which was great, especially at high revs. Stage 2 brings noticeable improvement lower in the range. In any case, for those who are on the fence, I absolutely recommend the GIAC tune.

[audis4culver]

Mine was right under 1200 - pulley and belt along with labor to take the front end off. I already had the DSG tune done a few months ago that is required - it was about 700 . Believe me - its worth it !! I live in georgia so I am about to put in extra cooling myself to prepare for the hot summer.

Pm price for stage 2 for b8 S4?

[Connie@GIAC]

I actually have my '15 scheduled for stage 2 ecu and transmission tuning next week. I was just checking out your new website (it's nice BTW) and noticed '15s aren't included. Am I going to run into a problem? I'm assuming I won't based on other posts, but I was curious why the website stops at 2014.

The 2015s ARE included, we apologize for our mistake. We will have that changed shortly.

what's the difference between stage2 and stage 2 high rev?
applicable to b8.5?

already have the dsg tune, so wouldn't mind a free upgrade to squeeze that extra power out

The high rev file was made to be compatible with our DSG software, so I would recommend getting it!

Price for stage 2 without pulley since I already have one installed on the car with dsg flash? .

PM sent!

Pm price for stage 2 for b8 S4?

PM sent!

Mine was right under 1200 - pulley and belt along with labor to take the front end off. I already had the DSG tune done a few months ago that is required - it was about 700 . Believe me - its worth it !! I live in georgia so I am about to put in extra cooling myself to prepare for the hot summer.

We're happy to hear that you like it! :)

[Rex Wilkinson]

what's the difference between stage2 and stage 2 high rev?
applicable to b8.5?

already have the dsg tune, so wouldn't mind a free upgrade to squeeze that extra power out

What is the high rev file and how would I know if I have it already or need it. I've been having an issue with my stage 2 tune that I got a couple months ago. I would really like this issue resolved. Thanks

[SR7D1]

What is the high rev file and how would I know if I have it already or need it. I've been having an issue with my stage 2 tune that I got a couple months ago. I would really like this issue resolved. Thanks

See post #31 here: http://www.audizine.com/forum/showth...0#post12070570

[Rex Wilkinson]

See post #31 here: http://www.audizine.com/forum/showth...0#post12070570

Thanks, PSUGOLD and I have been speaking already about our issues.

[Connie@GIAC]

What is the high rev file and how would I know if I have it already or need it. I've been having an issue with my stage 2 tune that I got a couple months ago. I would really like this issue resolved. Thanks

Your dealer should be able to identify which file was loaded into your car. As I've seen on the other thread and like Seth@GIAC said, it is likely that the files are mismatched. Our stage 2 hi-rev file was developed to be paired with our DSG tune. The original stage 2 file that is not hi-rev is for those who do not have our TCU tune. If your problem persists, please email or PM us so we can work with you and your dealer.

[Lensch09]

Your dealer should be able to identify which file was loaded into your car. As I've seen on the other thread and like Seth@GIAC said, it is likely that the files are mismatched. Our stage 2 hi-rev file was developed to be paired with our DSG tune. The original stage 2 file that is not hi-rev is for those who do not have our TCU tune. If your problem persists, please email or PM us so we can work with you and your dealer.

Connie,
Could you also verify that the high rev file will work on 6-speed manual cars?

My 6MT tops out between 6600-6800 RPMS. It's quite frustrating.

Feel free to PM me if that's easier.

Thanks,

-Dan


Sent from my iPhone using Tapatalk

[Connie@GIAC]

Connie,
Could you also verify that the high rev file will work on 6-speed manual cars?

My 6MT tops out between 6600-6800 RPMS. It's quite frustrating.

Feel free to PM me if that's easier.

Thanks,

-Dan


Sent from my iPhone using Tapatalk

PM sent to you!

[kmarei]

if I am getting stage 1 with DSG tune
is there a high rev version of stage 1?
or is this just for stage 2?

I am going tomorrow to get stage 1 and DSG :)

[Connie@GIAC]

if I am getting stage 1 with DSG tune
is there a high rev version of stage 1?
or is this just for stage 2?

I am going tomorrow to get stage 1 and DSG :)

We do have a hi-rev file for that, it raises the shift point to 7200 if you get our DSG software, which I see that you are. If you want this file, make sure you mention "hi-rev" to your dealer!

[SR7D1]

I have an appointment at my local dealer for the Stage 2 and TCU upgrade! For those of you that already have a pulley installed, be sure to ask GIAC about the FORGE Stage 2.

[Q5OnTheMove]

Can you tell us the status of the Dual Pulley file? Also, what size crank will be the largest available based on the Dual Pulley file you put out (183mm??)?