Bi-Xenon STI-R Morimoto Lenses From RetroFit Source

[SJorge3442]

Well, RFS sold me the wrong lenses at first and now I have a set of STI lenses that I need to send back. These were $30 plus shipping. If anyone wants them at $30 shipped, their yours. I'd rather hook you guys up than send them back to RFS. For the record, these are super easy to install in any bi-xenon housing and the performance upgrade is night and day. For my single Xenon, these were probably the best upgrade I've done to my a4. These are still in the shipping package and I haven't even opened the package.

These are blemish lenses meaning they aren't perfectly clear, but that's not supposed to matter. If these dont sell by Thursday, I'm just gonna send them back to RFS.

[mosnet99]

Does the USP come with single or bi ?

Sent from my ZTE A2017U using Tapatalk

[jesse500]

Does the USP come with single or bi ?

Sent from my ZTE A2017U using Tapatalk

04 single, 05 bi

[Jay B7]

Is this supposed to be a drop in replacement for any 05 stock bi xenon headlamps? sending a pm

[SJorge3442]

Yes these are drop in replacements.

Sent from my Nexus 6 using Tapatalk

[Volkswagenpaul]

I know you said drop in ready, but do these require the shims or the tape around the edge to fit properly. I remember reading about the sti lenses needing something around the edge to make them fit.

[SJorge3442]

I know you said drop in ready, but do these require the shims or the tape around the edge to fit properly. I remember reading about the sti lenses needing something around the edge to make them fit.

No they should fit no problem. You can add spacers if you want to increase the cutoff. Otherwise they are direct drop ins I believe. Plenty of threads on here documenting the process.

Sent from my Nexus 6 using Tapatalk

[TWong1200]

Do you happen to have before and after shots with these installed showing the light output in your single xenon unit that you mentioned?


Sent from my iPhone using Tapatalk

[SJorge3442]

Do you happen to have before and after shots with these installed showing the light output in your single xenon unit that you mentioned?


Sent from my iPhone using Tapatalk

I do not. My old lens were pretty faded/pitted and I spent the day wet sanding the outside lenses and changing the projector lens. I can tell you one thing though, I went have no cut off on my low beams to having a pretty clean cut off. Its not as sharp as I'd like, but I also didn't install any spacers. I will be spacing the lenses out once I order new bulbs as my drivers side bulb is beginning to fade/deteriorate.

In this post by EvoSki you can see how great of a cut off he was able to get by modding the projectors a little bit. You don't have to do this, but if you do, you will get a better/sharper cut off, as well as a more blue color on the cut off. Takes those pics and compare it to your current situation.

All I am trying to do here is save someone the shipping cost of buying these direct from RFS. If no one wants them, I'll just be returning them.

[SJorge3442]

Last day for these! I'm dropping them off at the post office tomorrow whether their addressed to you or RFS!

[Gosser]

I'll take them, whats your email for paypal funds?

[SJorge3442]

SOLD!