Audizine - An Automotive Enthusiast Community

Results 1 to 18 of 18
  1. #1
    Veteran Member Four Rings A4orce84's Avatar
    Join Date
    Feb 12 2004
    AZ Member #
    319
    Location
    Austin, Texas

    B6 Reverse Lights - LEDs

    Guest-only advertisement. Register or Log In now!
    Hey Everyone,

    Thinking about getting some LEDs to make backing out a bit more easier / light up the road behind me more. Does anyone know if I need to pick up LEDs with resistors in them or not (for bulb-out warnings)?

    I've seen some threads that say we do need resistors:
    http://www.audizine.com/forum/showth...up-Lights-LEDs

    and others that say we do NOT.

    What's the official word?


    Thanks,
    Asif
    Last edited by A4orce84; 11-03-2016 at 10:34 AM.
    USP CLUB MEMBER #101

    2004 A4 1.8T USP - APR Stage 2+, Mototec Sport Exhaust w/AWE downpipe, Valeo Clutch Kit, 2.0T FSI Coils, EVOMS Diverter Valve, Boosted Intake, B5 S4 Front Brakes, RNS-E + Bluetooth Module, VMR 708s (RS4 Reps), Boost Brothers FMIC, '02 OEM Sport Suspension + B5 Front Perches, PODi, JHM Solid Short Shifter, JHM Solid Linkage Upgrade, and a lot more stuff!

  2. #2
    Veteran Member Four Rings Spike00513's Avatar
    Join Date
    Mar 05 2013
    AZ Member #
    110766
    Location
    CA

    same.

    I was gonna look here to see if there's an answer:
    http://www.audizine.com/forum/showth...ar-the-eff-out

  3. #3
    Veteran Member Four Rings itsmatt33's Avatar
    Join Date
    Jul 14 2009
    AZ Member #
    44958
    Location
    Pasadena

    you dont need resistors. I did not. and check my led thread for a good recommendation
    GTX2867r 02 Audi A4 B6 TQM REVO|RECARO|HRE|ER|IE|APR|AWE|034 Build page here
    Daily Driven 18 Audi Q3 JB4|HRE|REMUS|KW|034|APR Build page here
    Widebody 19 Audi SQ5 ABT|HRE|034|WAGNER - GONE
    21 RS6 STERTMAN|HRE
    IG: @matthewee

  4. #4
    Veteran Member Four Rings A4orce84's Avatar
    Join Date
    Feb 12 2004
    AZ Member #
    319
    Location
    Austin, Texas

    Quote Originally Posted by itsmatt33 View Post
    you dont need resistors. I did not. and check my led thread for a good recommendation

    Link handy?
    USP CLUB MEMBER #101

    2004 A4 1.8T USP - APR Stage 2+, Mototec Sport Exhaust w/AWE downpipe, Valeo Clutch Kit, 2.0T FSI Coils, EVOMS Diverter Valve, Boosted Intake, B5 S4 Front Brakes, RNS-E + Bluetooth Module, VMR 708s (RS4 Reps), Boost Brothers FMIC, '02 OEM Sport Suspension + B5 Front Perches, PODi, JHM Solid Short Shifter, JHM Solid Linkage Upgrade, and a lot more stuff!

  5. #5
    Veteran Member Four Rings Nollywood's Avatar
    Join Date
    Nov 03 2011
    AZ Member #
    83391
    My Garage
    ‘07 B7 RS4 Avant, 10 SEAT Exeo ST, ‘13 3R9 400-R
    Location
    All Over!

    The reverse lamp bulbs are not monitored by the bulb failure module, so no resistors are required if replacing tungsten bulbs with LED's.
    2007 Audi RS4 Avant B7 - Misano Red Pearl Effect
    2007 Audi RS4 Saloon B7 - Sprint Blue
    2013 SEAT Exeo ST - Project 3R9 400-R
    2010 SEAT Exeo ST - Project 3R9 420-S
    1986 Type 85 Audi 90 quattro

  6. #6
    Veteran Member Four Rings itsmatt33's Avatar
    Join Date
    Jul 14 2009
    AZ Member #
    44958
    Location
    Pasadena

    Quote Originally Posted by A4orce84 View Post
    Link handy?
    http://www.audizine.com/forum/showth...ar-the-eff-out
    GTX2867r 02 Audi A4 B6 TQM REVO|RECARO|HRE|ER|IE|APR|AWE|034 Build page here
    Daily Driven 18 Audi Q3 JB4|HRE|REMUS|KW|034|APR Build page here
    Widebody 19 Audi SQ5 ABT|HRE|034|WAGNER - GONE
    21 RS6 STERTMAN|HRE
    IG: @matthewee

  7. #7
    Active Member Two Rings
    Join Date
    May 05 2016
    AZ Member #
    372866
    My Garage
    300ZX TT, 01 Forester
    Location
    Austin, MN

    I just replaced my stock reverse bulbs with a set of LEDs from ECS. No trouble lights, they look amazing!
    https://www.ecstuning.com/Audi-B6_A4...LED/ES2524008/

  8. #8
    Veteran Member Four Rings Spike00513's Avatar
    Join Date
    Mar 05 2013
    AZ Member #
    110766
    Location
    CA

    Quote Originally Posted by itsmatt33 View Post
    you dont need resistors. I did not. and check my led thread for a good recommendation
    Quote Originally Posted by Nollywood View Post
    The reverse lamp bulbs are not monitored by the bulb failure module, so no resistors are required if replacing tungsten bulbs with LED's.
    Guess I'll assume that for all B6.
    I know at least for LED rear plate, some have the polarity reversed so you have to switch it.

  9. #9
    Veteran Member Four Rings A4orce84's Avatar
    Join Date
    Feb 12 2004
    AZ Member #
    319
    Location
    Austin, Texas

    Anyone have any links handy to the rear TURN SIGNAL (yellow-color) LEDs possibly?

    Thanks.
    USP CLUB MEMBER #101

    2004 A4 1.8T USP - APR Stage 2+, Mototec Sport Exhaust w/AWE downpipe, Valeo Clutch Kit, 2.0T FSI Coils, EVOMS Diverter Valve, Boosted Intake, B5 S4 Front Brakes, RNS-E + Bluetooth Module, VMR 708s (RS4 Reps), Boost Brothers FMIC, '02 OEM Sport Suspension + B5 Front Perches, PODi, JHM Solid Short Shifter, JHM Solid Linkage Upgrade, and a lot more stuff!

  10. #10
    Veteran Member Four Rings
    Join Date
    Apr 01 2005
    AZ Member #
    5944
    My Garage
    one wagon one truck
    Location
    Michigan

    anyone have budget friendly link? not looking to spend 40-50 on some lights I only use a few times week.
    2009 Audi A4 avant, ECS CAI, Malone stage 2 tune, etc.
    1995 Mazda Miata Montego blue with tan
    2003 A4 1.8tqms Mototec Cold air intake, USP door Blades, GIAC software and bigger injectors. - Gone

  11. #11
    Established Member Two Rings
    Join Date
    Jul 31 2016
    AZ Member #
    377526
    Location
    Montana

    eBay for cheap led lights. I have only got one bad set before on eBay and have used a lot of leds on apast vehicles which only cost a couple bucks anyways

  12. #12
    Veteran Member Four Rings Spike00513's Avatar
    Join Date
    Mar 05 2013
    AZ Member #
    110766
    Location
    CA

    What about the new name-brand stuff coming out now?

    Philips & Osram Sylvania Zevo






  13. #13
    Veteran Member Four Rings customa4's Avatar
    Join Date
    Apr 07 2011
    AZ Member #
    73592
    My Garage
    02 A4 1.8T CVT, 02 A4 1.8TQ 5spd, 92 Geo Prizm
    Location
    CT

    I'm interested in some LED reverse lights as well. Any one else with more info/reviews?
    K&N-Milltek HFC-Magnaflow Catback-APR snub mount-ER Sport FMIC-Forge TIP-Forge DV-Podi-034 Motor Mounts-034 Rear Sway/End Links-STaSIS Street Sport Coils-Bentley Manual

  14. #14
    Senior Member Three Rings
    Join Date
    Nov 10 2015
    AZ Member #
    364261
    Location
    Sudbury, ON

    http://www.ebay.com/itm/152019871542...%3AMEBIDX%3AIT

    I bought these, no issues, work fine. nice and bright!
    2004 Audi A4Q 1.8T Ultrasport 6MT
    Frankenturbo'd, Meth, front mount, custom tune, full exhaust, bunch of other crap
    2004 Audi A4 Quattro 1.8T Tip Sport Pkg SOLD
    18" S4 Avus wheels l Eibach Lowering springs l Magnaflow 16601 l 3" TP l Pioneer Double Din l USP Bumper/S4 Door blades/Spoiler l Black on Black

  15. #15
    Active Member Four Rings EuroxS4's Avatar
    Join Date
    Jan 24 2010
    AZ Member #
    53856
    My Garage
    2003 Atlas Grey A4 Avant 1.8T 6speed manual quattro,2002 GSXR 600
    Location
    Paramus,NJ USA

    any standard 1156 led bulb will work.
    VW/Audi Immobilizer removal and immobilizer adapting solutions for any and all VAG Vehicles, Odometer matching, SKC/Pin retrieval services/ Component Protection/Module Coding/Diagnosis Services and repairs.RB4/RB8 Specialist cloning and repairs. Located in Northern NJ. For inquries pm for details or contact me via Whatsapp
    Ziddy Autowerks

  16. #16
    Established Member Two Rings 02A4_quattro's Avatar
    Join Date
    Jul 03 2016
    AZ Member #
    375583
    My Garage
    Tuned & lifted Ram 2500 6.7
    Location
    New Hampshire

    I love my set from ECS. I've had them installed for almost a year, no problems at all. I'm 99℅ sure all LEDs went on sale at Christmas time last year, maybe the same will happen this year if you can hold out that long

    Sent from my XT1585 using Audizine mobile app

  17. #17
    Veteran Member Four Rings Spike00513's Avatar
    Join Date
    Mar 05 2013
    AZ Member #
    110766
    Location
    CA

    http://www.ebay.com/itm/No-Error-FOR...mtr&rmvSB=true

    I got these to copy as per Matt's recommendation, but they flicker 5 times upon Key-ON, which I'm told is normal:
    Quote Originally Posted by itsmatt33
    All exterior leds will do this, it's the electric current loading up into the canbus resistors

  18. #18
    Veteran Member Four Rings
    Join Date
    Mar 13 2009
    AZ Member #
    39820
    My Garage
    MK3 VR6
    Location
    Houston, TX

    I have the ECS projector LED's as well. Super bright, no issues.


    Sent from my iPhone using Tapatalk
    B6 USP Avant

    USP CLUB MEMBER #242


    AMB + GSX28RS

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.