S3 exhaust measurements needed please

[AnthonyA3]

[IMG][/IMG]
I don't have the sline A3 and I'm not spending $1000 on a bumber either. I decided to get a 1.8t rear diffuser and open up the dummy dual exhaust section. I'm not sure if it will work so if someone would be kind enough to measure their S3 exhaust for me I will greatly appreciate it. I need the left side inside exhaust tip to the right inside tip exhaust measurement. I need that one to make sure the spacing is the same. I also need the left or right side opening size. Thanks

[Cairo94507]

So on my '16 S3, from the inside edge of the inner left tip, to the inside edge of the inner right tip, I get 31 5/8". OO--------OO is the way I measured it. Then when I measured the opening in the valance, at the bottom back edge, where the bottom of the valance ends, closest to the rear tire, I get 9". Hope that helps.

[AnthonyA3]

So on my '16 S3, from the inside edge of the inner left tip, to the inside edge of the inner right tip, I get 31 5/8". OO--------OO is the way I measured it. Then when I measured the opening in the valance, at the bottom back edge, where the bottom of the valance ends, closest to the rear tire, I get 9". Hope that helps.

Awesome, that is exactly what I needed. Thanks!